The degree of coupling depends

The degree of coupling depends 

(A) size of hole (B) location of holes (C) size and location of holes (D) not depend on size or location of hole
by

1 Answer

Answer :

The degree of coupling depends location of holes

by

Related questions

The coefficient of coupling between two air core coils depends on

Description : The coefficient of coupling between two air core coils depends on   (A) mutual inductance between two coils only (B) self inductances of the two coils only (C) mutual inductance and self inductances of the two coils (D) none

Last Answer : The coefficient of coupling between two air core coils depends on mutual inductance and self inductances of the two coils 

The co-efficient of coupling of two coils depends on

Last Answer : The co-efficient of coupling of two coils depends on Physical location of the coils.

Co-ordinate coupling is an example of A. Single Degree of Freedom System B. Several Degree of Freedom System C. Two Degree of Freedom System D. None

Description : Co-ordinate coupling is an example of A. Single Degree of Freedom System B. Several Degree of Freedom System C. Two Degree of Freedom System D. None

Last Answer : C. Two Degree of Freedom System

Which of the following statement(s) is/are true with respect to software architecture? S1: Coupling is a measure of how well the things grouped together in a module belong together logically. S2: Cohesion is a measure of the degree of interaction between software modules. S3: If coupling is low and cohesion is high then it is easier to change one module without affecting others. (1) Only S1 and S2 (2) Only S3 (3) All of S1, S2 and S3 (4) Only S1

Description : Which of the following statement(s) is/are true with respect to software architecture? S1: Coupling is a measure of how well the things grouped together in a module belong together logically. S2: Cohesion is a measure of the ... ) Only S1 and S2 (2) Only S3 (3) All of S1, S2 and S3 (4) Only S1

Last Answer : Answer: 2

If an atom loses one or more electrons, it becomes _____.

Description : If an atom loses one or more electrons, it becomes _____.

Last Answer : It   becomes   positively  charged    atom.

The correct order of electromagnetic spectrum with decreasing frequency is:

Description : The correct order of electromagnetic spectrum with decreasing frequency is: (1) Microwaves, Radiowaves, Infrared rays, Ultraviolet rays, X-rays (2) Radiowaves, Infrared rays, Ultraviolet rays, ... Radiowaves, Ultraviolet rays (4) X-rays, Ultraviolet rays, Infrared rays, Microwaves, Radiowaves 

Last Answer : The correct order of electromagnetic spectrum with decreasing frequency is: (1) Microwaves, Radiowaves, Infrared rays, Ultraviolet rays, X-rays (2) Radiowaves, Infrared rays, Ultraviolet rays, ... Radiowaves, Ultraviolet rays (4) X-rays, Ultraviolet rays, Infrared rays, Microwaves, Radiowaves 

Ferrites are types of

Description : Ferrites are types of (a) magnetic material (b) conducting material (c) semiconducting material (d) insulating material

Last Answer : Ferrites  are  types  of  magnetic  material.

In which material, valence electrons are tightly bounded to their parent atoms ?

Description : In which material, valence electrons are tightly bounded to their parent atoms ? (a) Conductor (b) Semiconductor (c) Insulator (d) Magnetic 

Last Answer : insulator(b)

If temperature of a pure silicon specimen is increased, then

Description : If temperature of a pure silicon specimen is increased, then (a) only number of free electrons increase. (b) only number of free holes increase. (c) number of free holes and free electrons increases. (d) only number of free holes decrease. 

Last Answer : Number  of  free  holes  and   free  electrons  increases.

A material has conductivity of 10–2 mho/m and relative permittivity of 4. The frequency at which the

Description : A material has conductivity of 10–2 mho/m and relative permittivity of 4. The frequency at which the conduction current in the medium is equal to the displacement current, is (a) 450 MHz (b) 900 MHz (c) 45 MHz (d) 90 MHz

Last Answer : C

A cable has an insulation of relative permittivity 2. If the insulation is replaced by one of relative permittivity

Description : A cable has an insulation of relative permittivity 2. If the insulation is replaced by one of relative permittivity 4, then capacitance of the cable (a) is doubled (b) is halved (c) remains unchanged (d) is reduced 

Last Answer : B

Three materials X, Y and Z having relative permittivity 2.5, 3.0 and 4.0 respectively are used in a single core

Description : Three materials X, Y and Z having relative permittivity 2.5, 3.0 and 4.0 respectively are used in a single core cable. The materials on inner most and outer most layer respectively should be (a) X and Y (b) Y and Z (c) X and Z (d) Z and X 

Last Answer : Answer is option d Because the material with high relative permitivity should be used as the inner most layer of the cable,to withstand with the  high currents flowing in the conductor 

The transferred electron bulk effect occurs in

Description : The transferred electron bulk effect occurs in

Last Answer : The transferred electron bulk effect occurs in Gallium Arsenide

A compact microstrip antenna may be obtained by

Description : A compact microstrip antenna may be obtained by

Last Answer : A compact microstrip antenna may be obtained by cutting slot on the patch

Frequency is inherently a physical quantity with characteristics.

Description : Frequency is inherently a physical quantity with characteristics.  a. Positive b. negative c. both a &b d. none of above 

Last Answer : Frequency is inherently a physical quantity with characteristics. Positive 

Form the hot metal surface electrons escape because

Description : Form the hot metal surface electrons escape because   (A) of change of state from metal to gas due to heat. (B) of change of state from gas to metal (C) the energy supplied is greater than the work function (D) the energy is greater than Fermi level

Last Answer : Form the hot metal surface electrons escape because the energy supplied is greater than the work function

In any atom the potential energy of an orbiting electron is

Description : In any atom the potential energy of an orbiting electron is   (A) always positive (B) always negative (C) sometime positive, sometime negative (D) numerically less then its kinetic energy.

Last Answer : In any atom the potential energy of an orbiting electron is always negative 

At a particular temperature and current density, the critical magnetic field for a Type I superconductor is Bc

Description : At a particular temperature and current density, the critical magnetic field for a Type I superconductor is Bc and that for a type II superconductor ranges from Bc1 to Bc2 keeping other ... will switch to the normal conducting state, while Type II superconductor will maintain a vortex sate

Last Answer : At a particular temperature and current density, the critical magnetic field for a Type I superconductor is Bc and that for a type II superconductor ranges from Bc1 to Bc2 keeping other ... will switch to the normal conducting state, while Type II superconductor will maintain a vortex sate

In order to generate electron-hole pairs, the maximum wavelength of radiation for Silicon (Band gap = 1.1 eV)

Description : In order to generate electron-hole pairs, the maximum wavelength of radiation for Silicon (Band gap = 1.1 eV) is  (a) 1.88 μm (b) 1.68 μm (c) 1.13 μm (d) 1.54 μm

Last Answer : In order to generate electron-hole pairs, the maximum wavelength of radiation for Silicon (Band gap = 1.1 eV) is 1.13 μm

In a metal wire, which particle carries electric current?

Description : In a metal wire, which particle carries electric current?

Last Answer : In   a  metal  wire  the  particles   responsible  for  carrying  electric  current  are  holes.

Silicon dioxide is

Description : Silicon dioxide is (A) a conductor (B) an insulator (C) a useful circuit element  (D) useful as contact in MOSFET

Last Answer : Silicon dioxide is an insulator

A forward-biased PN-junction,

Description : A forward-biased PN-junction,  (A) results in increase in diffusion current  (B) results in increase in drift current  (C) results in decrease in drift current  (D) results in decrease in diffusion current

Last Answer : A forward-biased PN-junction,  results in increase in diffusion current 

In a PN-junction with open circuit terminal (equilibrium), with P doping higher as compared to N

Description : In a PN-junction with open circuit terminal (equilibrium), with P doping higher as compared to N doping (A) N-side depletion region is small as compared to p-side depletion region (B) N-side ... depletion region (C) N-side depletion region is same as p-side depletion region (D) Cannot say

Last Answer : In a PN-junction with open circuit terminal (equilibrium), with P doping higher as compared to N doping N-side depletion region is small as compared to p-side depletion region

Which of the following is true regarding the band-gap energy of a semiconductor ?

Description : Which of the following is true regarding the band-gap energy of a semiconductor ? (A) Minimum energy required to break a covalent bond (B) On breaking of the bond, electron is generated (C) On breaking of the bond, electron-hole pair is generated (D) A & C both are true

Last Answer : Which of the following is true regarding the band-gap energy of a semiconductor ? (A) Minimum energy required to break a covalent bond (B) On breaking of the bond, electron is generated (C) On breaking of the bond, electron-hole pair is generated (D) A & C both are true

The coefficient of reflection for current wave is

Description : The coefficient of reflection for current wave is

Last Answer : The coefficient of reflection for current wave is 1 or -1

The velocity of travelling wave through a cable of relative permittivity 36 is

Description : The velocity of travelling wave through a cable of relative permittivity 36 is

Last Answer : The velocity of travelling wave through a cable of relative permittivity 36 is 0.5 x 108 m/sec

The average life of neutrons after they decay is

Description : The average life of neutrons after they decay is

Last Answer : The average life of neutrons after they decay is 10 sec

Which of the following statements is not characteristic of a static magnetic field?

Description : Which of the following statements is not characteristic of a static magnetic field? (A) It is solenoidal. (B) It is conservative. (C) It has no sinks or sources. (D) Flux lines are always closed.

Last Answer : Which of the following statements is not characteristic of a static magnetic field? (A) It is solenoidal. (B) It is conservative. (C) It has no sinks or sources. (D) Flux lines are always closed.

At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because

Description : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because (A) Of drive in diffusion of dopants & carriers. (B) Band to band transition dominates impurity ionization. (C) ... band to band transition. (D) Band to band transition is balanced by impurity ionisation.

Last Answer : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because Impurity ionization dominates band to band transition.

A radioactive isotope has a half-life of 10 days. If today there are 125 g of it left, what was its original weight...

Description : A radioactive isotope has a half-life of 10 days. If today there are 125 g of it left, what was its original weight 40 days earlier  (a) 600 g (b) 1000 g (c) 1250 g (d) 2000 g 

Last Answer : Half life = 10days  The formula which is, 1/(2)^n × original weight = Weight left today.  To obtain the value of n = divide no of days by half life ie.,n= 40/10= 4 n=4 So, 1/(2)^n × original Weight = 125g 1/(2)^4 × Original weight = 125 Original weight = 16×125 = 2000g

X-rays are used for the study of crystal structure because...

Description : X-rays are used for the study of crystal structure because  (a) X-rays are completely absorbed by the crystal (b) the wavelength of X-ray is of the same order of magnitude in the inter ... in comparison with the inter-atomic spacing in crystals (d) the crystals are completely transparent to X-rays

Last Answer : the wavelength of X-ray is of the same order of magnitude in the inter atomic spacing in crystals 

A semiconductor is formed by ……… bonds.

Last Answer : A semiconductor is formed by Covalent bonds.

What is the difference between watt volt and ampere?

Last Answer : Difference between watt and volt and ampere is as follows: Watt Volt Ampere Watt is the unit of power. Volt is the unit of voltage. Ampere is the unit of current. Watts= Volts x Amperes Volts= Watts/ ...

What is the charge and mass of an electron?

Description : What is the charge and mass of an electron?

Last Answer : Charge on electrons is 1.6022*10-19CAnd the mass of electrons is 9.109*10-31 kg

The quality of democracy depends upon the degree of public participation. -SST 10th

Description : The quality of democracy depends upon the degree of public participation. -SST 10th

Last Answer : 1. Democracy is a government of the people, by the people and for the people. The people' i.e. the public is, therefore, the most important player in the democratic sphere. ... about the activities of the government authorities and participate in the decision-making process at different levels.

The degree of dissociation of an electrolyte depends on - (1) dilution (2) impurities (3) atmospheric pressure (4) method of dissolution

Description : The degree of dissociation of an electrolyte depends on - (1) dilution (2) impurities (3) atmospheric pressure (4) method of dissolution

Last Answer : (1) dilution Explanation: The extent to which an electrolyte dissociates into ions is known as degree of dissociation or ionization and depends upon the following factors: (1) Nature of the electrolyte, (2) Temperature, (3) Dilution, (4) nature of the solvent, and (e) presence of other ions.

The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear crystal growth rate does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

Description : The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear ... does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

Last Answer : (C) Linear crystal growth rate does not depend on the crystal size

Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Description : Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic pressure. 3. Secondary consolidation obeys Terzaghi’s one-dimensional theory of consolidation. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Mathematically speaking, the time taken for 100% consolidation is infinite. 2. The time factor for a particular average degree of consolidation depends upon the distribution of initial excess hydrostatic ... 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

The degree of bearing resolution for a given radar system depends on what two factors?

Description : The degree of bearing resolution for a given radar system depends on what two factors?

Last Answer : Beam width and range.

Flexibility of the retentive clasp arm depends on: A. Length B. Cross section C. Material D. Degree of taper E. All of the above

Description : Flexibility of the retentive clasp arm depends on: A. Length B. Cross section C. Material D. Degree of taper E. All of the above

Last Answer : E. All of the above

The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Description : The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

61 The degree of mechanical vibrations produced by the laminations of a transformers depends on A. Tightness of clamping B. Gauge of laminations C. Size of laminations D. All of the above

Description : 61 The degree of mechanical vibrations produced by the laminations of a transformers depends on A. Tightness of clamping B. Gauge of laminations C. Size of laminations D. All of the above

Last Answer : D. All of the above

The degree of dissociation of an electrolyte depends on (1) dilution (2) impurities (3) atmospheric pressure (4) method of dissolution

Description : The degree of dissociation of an electrolyte depends on (1) dilution (2) impurities (3) atmospheric pressure (4) method of dissolution

Last Answer : dilution

The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

Description : The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

Last Answer : The degree of protection by ground wire depends upon the a. Arcing angle b. Shielding angle c. Power factor d. All of above

The degree of mechanical vibrations produced by the laminations of a transformer depends on?

Description : The degree of mechanical vibrations produced by the laminations of a transformer depends on?

Last Answer : The degree of mechanical vibrations produced by the laminations of a transformer depends on tightness of clamping, gauge of laminations, size of laminations.

We’re watching the Wizard of Oz, and I’m wondering if there’s any truth to the story about the difficulty they had filming the movie due to the fact that the little actors playing the munchkins were so busy coupling up?

Description : We’re watching the Wizard of Oz, and I’m wondering if there’s any truth to the story about the difficulty they had filming the movie due to the fact that the little actors playing the munchkins were so busy coupling up?

Last Answer : The last munchkin to die seemed to have said that sadly Garland’s personal problems which included drinking led to making unfortunate statements which were untrue.

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

What is the answer Two NYC metro railway cars coupling at Grand Central station.Describe the motion of the coupling card and their motion after colliding?

Description : What is the answer Two NYC metro railway cars coupling at Grand Central station.Describe the motion of the coupling card and their motion after colliding?

Last Answer : I

What is a coupling reaction ?

Description : What is a coupling reaction ?

Last Answer : : An oxidation reaction in which two or more chemicals combine to form a single product is called a coupling reaction. For example, ferrous chloride combines with chlorine to produce ferric ... Thus the process of producing ammonia gas is considered as either a coupling or synthesis reaction.