The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear crystal growth rate does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

The McCabe ΔL law states that the

(A) Molar heats of vaporisation of components are nearly equal

(B) Linear crystal growth rate depends on the degree of super-saturation

(C) Linear crystal growth rate does not depend on the crystal size

(D) Linear crystal growth rate depends on the crystal size

by

1 Answer

Answer :

(C) Linear crystal growth rate does not depend on the crystal size


by

Related questions

McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Description : McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Last Answer : (D) None of these

Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Description : Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent heat of vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Description : In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent ... vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Last Answer : (D) A total condenser is used

Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The liquor left after the removal of crystals from a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Description : Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The ... a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Last Answer : (A) Swenson-Walker crystalliser is a batch crystalliser

The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Description : The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Last Answer : (C) Super-saturation

Which of the following assumes constant molal vaporisation and overflow?(A) McCabe-Thiele method (B) Ponchan-Savarit method (C) Enthalpy concentration method (D) Plate absorption column

Description : Which of the following assumes constant molal vaporisation and overflow? (A) McCabe-Thiele method (B) Ponchan-Savarit method (C) Enthalpy concentration method (D) Plate absorption column

Last Answer : (A) McCabe-Thiele method

Specific/molar Gibbs free energy for a pure substance does not change during (A) Sublimation (B) Vaporisation (C) Melting (D) Either (A), (B) or (C)

Description : Specific/molar Gibbs free energy for a pure substance does not change during (A) Sublimation (B) Vaporisation (C) Melting (D) Either (A), (B) or (C)

Last Answer : (D) Either (A), (B) or (C)

At normal boiling point, molar entropy of vaporisation is __________ Joule/K°.mole. (A) 72 (B) 92 (C) 142 (D) 192

Description : At normal boiling point, molar entropy of vaporisation is __________ Joule/K°.mole. (A) 72 (B) 92 (C) 142 (D) 192

Last Answer : (B) 92

Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Description : Which of the following is Clausius-Clapeyron Equation for vaporisation of an ideal gas under the condition that the molar volume of liquid is negligible compared to that of the vapor? (A) d ln p/dt = Hvap/RT2 (B) d ln p/dt = RT2/Hvap (C) dp/dt = RT2/Hvap (D) dp/dt = Hvap/RT2

Last Answer : (A) d ln p/dt = Hvap/RT2

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Description : In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Last Answer : (A) Lower than

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement. (A) Minimum number of degree of freedom of a system is zero (B) Degree of freedom of a system containing a gaseous mixture of helium, carbon dioxide and hydrogen is 4 (C) For a two phase system in equilibrium made up of fourchemical species, the number of degrees of freedom is 4 (D) Enthalpy and internal energy change is zero during phase change processes like melting, vaporisation and sublimation

Description : Pick out the wrong statement. (A) Minimum number of degree of freedom of a system is zero (B) Degree of freedom of a system containing a gaseous mixture of helium, carbon ... ) Enthalpy and internal energy change is zero during phase change processes like melting, vaporisation and sublimation

Last Answer : (D) Enthalpy and internal energy change is zero during phase change processes like melting, vaporisation and sublimation

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

According to the 'law of mass action', the rate of reaction is directlyproportional to the (A) Equilibrium constant (B) Volume of the reaction vessel (C) Nature of the reactants (D) Molar concentration of the reactants

Description : According to the 'law of mass action', the rate of reaction is directlyproportional to the (A) Equilibrium constant (B) Volume of the reaction vessel (C) Nature of the reactants (D) Molar concentration of the reactants

Last Answer : (D) Molar concentration of the reactants

Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Description : Mass transfer rate between two fluid phases does not necessarily depend on the __________ of the two phases. (A) Chemical properties (B) Physical properties (C) Degree of turbulence (D) Interfacial area

Last Answer : (A) Chemical properties

Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of vaporisation is constant (C) Volume in the liquid state is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Description : Clausius-Clapeyron Equation gives accurate result, when the (A) Vapour pressure is relatively low and the temperature does not vary over wide limits (B) Vapour obeys the ideal gas law and the latent heat of ... is negligible compared with that in the vapour state (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

If the molar heat capacities (Cp or Cv) of the reactants and products of a chemical reaction are identical, then, with the increase in temperature, the heat of reaction will (A) Increase (B) Decrease (C) Remain unaltered (D) Increase or decrease; depends on the particular reaction

Description : If the molar heat capacities (Cp or Cv) of the reactants and products of a chemical reaction are identical, then, with the increase in temperature, the heat of reaction will (A) Increase (B) Decrease (C) Remain unaltered (D) Increase or decrease; depends on the particular reaction

Last Answer : (C) Remain unaltered

Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Description : Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Last Answer : (D) A counter diffusion at an almost equal molar rate

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is proportional to the number of times the fluid crosses the bundle between baffles (C) Propagation velocity for travel of heat radiation through vacuum is equal to the velocity of the light (D) The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume

Gibbs free energy per mole for a pure substance is equal to the (A) Latent heat of vaporisation (B) Chemical potential (C) Molal boiling point (D) Heat capacity

Description : Gibbs free energy per mole for a pure substance is equal to the (A) Latent heat of vaporisation (B) Chemical potential (C) Molal boiling point (D) Heat capacity

Last Answer : (B) Chemical potential

Rate of heat transfer by vaporisation from pools of water is affected by the (A) Nature of heating surface and distribution of bubbles (B) Surface tension of water (C) Viscosity of water (D) All (A), (B) and (C)

Description : Rate of heat transfer by vaporisation from pools of water is affected by the (A) Nature of heating surface and distribution of bubbles (B) Surface tension of water (C) Viscosity of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Description : The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Last Answer : (C) Economy

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

The amount of audit fees depend largely on the a. Size and capitalization of the company under audit. b. Amount of profit for the year. c. Availability of cash. d. Volume of audit work and degree of competence and responsibilities involved.

Description : The amount of audit fees depend largely on the a. Size and capitalization of the company under audit. b. Amount of profit for the year. c. Availability of cash. d. Volume of audit work and degree of competence and responsibilities involved.

Last Answer : Volume of audit work and degree of competence and responsibilities involved.

If f = moles of vapour present per mole of feed, then the slope of feed line is (McCabe-Thiele method) (A) (1 - f)/f (B) - (f - 1)/f (C) -1/f (D) -f/(1 - f)

Description : If f = moles of vapour present per mole of feed, then the slope of feed line is (McCabe-Thiele method) (A) (1 - f)/f (B) - (f - 1)/f (C) -1/f (D) -f/(1 - f)

Last Answer : (C) -1/f

In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Description : In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Last Answer : (A) Total

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) The overhead product is minimum

McCabe-Thiele method (A) Uses molal units for material and energy balance (B) Uses weight fractions to express liquid and vapour composition (C) Can use any type of units (D) Is more accurate than Ponchon-Savarit method

Description : McCabe-Thiele method (A) Uses molal units for material and energy balance (B) Uses weight fractions to express liquid and vapour composition (C) Can use any type of units (D) Is more accurate than Ponchon-Savarit method

Last Answer : (A) Uses molal units for material and energy balance

In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Description : In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Last Answer : (C) Both the operating lines coincide with the diagram

Design calculation for multiple component distillation is done by (A) Ponchon-Savarit method (B) McCabe-Thiele method (C) Enthalpy concentration method (D) Tray to tray calculations

Description : Design calculation for multiple component distillation is done by (A) Ponchon-Savarit method (B) McCabe-Thiele method (C) Enthalpy concentration method (D) Tray to tray calculations

Last Answer : (D) Tray to tray calculations

Heat transfer rate to the stock/charge in the furnace does not depend upon the(A) Emissivity of the refractory walls(B) Size of the furnace(C) Use of waste heat recovery equipments(D) Thickness of the stock

Description : Heat transfer rate to the stock/charge in the furnace does not depend upon the (A) Emissivity of the refractory walls (B) Size of the furnace (C) Use of waste heat recovery equipments (D) Thickness of the stock

Last Answer : (C) Use of waste heat recovery equipments

The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Description : The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Last Answer : Ans:(b)

The total magnetic moment 1. is called saturation magnetization. 2. depends on the number of magnetic ...

Description : The total magnetic moment  1. is called saturation magnetization.  2. depends on the number of magnetic dipoles per unit volume, the instant electric current and the area of the current loop.  Which of the above statements is/are correct ?

Last Answer : depends on the number of magnetic dipoles per unit volume, the instant electric current and the area of the current loop

A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Description : A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Last Answer : ANSWER: Y -- SOLUTE SOLUBILITY DECREASES WITH RISING SOLUTION TEMPERATURE

The gas constant (R) is equal to the __________ of two specific heats.  A. sum  B. difference  C. product  D. ratio

Description : The gas constant (R) is equal to the __________ of two specific heats.  A. sum  B. difference  C. product  D. ratio

Last Answer : Answer: B

Universal gas constant is defined as equal to product of the molecular weight of the gas and  (a) specific heat at constant pressure  (b) specific heat at constant volume  (c) ratio of two specific heats  (d) gas constant  (e) unity.

Description : Universal gas constant is defined as equal to product of the molecular weight of the gas and  (a) specific heat at constant pressure  (b) specific heat at constant volume  (c) ratio of two specific heats  (d) gas constant  (e) unity.

Last Answer : Answer : d

The ratio of two specific heats of air is equal to  (a) 0.17  (b) 0.24  (c) 0.1  (d) 1.41  (e) 2.71.

Description : The ratio of two specific heats of air is equal to  (a) 0.17  (b) 0.24  (c) 0.1  (d) 1.41  (e) 2.71.

Last Answer : Answer : d

Equal volumes of two monoatomic gases, A and B, at same temperature and pressure are mixed. The ratio of specific heats (Cp /Cv ) of the mixture will be (1) 1.67 (2) 0.83 (3) 1.50 (4) 3.3

Description : Equal volumes of two monoatomic gases, A and B, at same temperature and pressure are mixed. The ratio of specific heats (Cp /Cv ) of the mixture will be (1) 1.67 (2) 0.83 (3) 1.50 (4) 3.3

Last Answer : (1) 1.67

The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Description : The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Last Answer : (D) None of these

The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Description : The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Last Answer : (A) Depends only on Reynolds number

The temperature in isentropic flow (A) Does not depend on Mach number (B) Depends on Mach number only (C) Cannot drop and then increase again downstream (D) None of these

Description : The temperature in isentropic flow (A) Does not depend on Mach number (B) Depends on Mach number only (C) Cannot drop and then increase again downstream (D) None of these

Last Answer : (B) Depends on Mach number only

Agitator is provided in a crystalliser for(A) Avoiding deposition on cooler surfaces(B) Formation of nuclei(C) Crystal growth(D) All (A), (B) and (C)

Description : Agitator is provided in a crystalliser for (A) Avoiding deposition on cooler surfaces (B) Formation of nuclei (C) Crystal growth (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The Cyclomatic Complexity, V(G) was developed by A. Howard B. McCabe C. Boehm D. None of the above.

Description : The Cyclomatic Complexity, V(G) was developed by A. Howard B. McCabe C. Boehm D. None of the above.

Last Answer : B. McCabe

_____ is a white-box testing technique first proposed by Tom McCabe. a) Equivalence Partitioning b) Basis Path Testing c.) Boundary Value Analysis d) None of the above.

Description : _____ is a white-box testing technique first proposed by Tom McCabe. a) Equivalence Partitioning b) Basis Path Testing c.) Boundary Value Analysis d) None of the above.

Last Answer : Ans : b. 

PROBLEM GThe moist unit weights of the soil are 105.73 pcf and 112.67 pcf, and the respective degree of saturation are 50.0% and 75.0%, compute the values of thevoid ratio, porosity, and specific gravity of the given soil?

Description : PROBLEM GThe moist unit weights of the soil are 105.73 pcf and 112.67 pcf, and the respective degree of saturation are 50.0% and 75.0%, compute the values of thevoid ratio, porosity, and specific gravity of the given soil?

Last Answer : Pressuron theory (2013) by Olivier Minazzoli and Aurélien Hees

PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Description : PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?

Last Answer : two seconds