Description : The heat of hydration for low heat cement at the age of 7 days shall not exceed [ A ] 80 cal / gm [ B ] 75 cal / gm [ C ] 70 cal / gm [ D ] 65 cal / gm
Last Answer : [ D ] 65 cal / gm
Description : Which of the following represents hardest grade of bitumen? (A) 30/40 (B) 60/70 (C) 80/100 (D) 100/120
Last Answer : Answer: Option A
Description : The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes
Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes
Last Answer : Answer: Option B
Description : Two columns 50 cm 50 cm and 60 cm 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t ... the foundation slab = 7.00 m (C) Area of footing slab = 11.00 m2 (D) All the above
Last Answer : Option D
Description : Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days
Last Answer : Answer: Option D
Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2
Last Answer : (C) Initial setting time is not less than 30 minutes
Description : Under normal conditions using an ordinary cement, the period of removal of the form work, is: (A) 7 days for beam soffits (B) 14 days for bottom slabs of spans 4.6 m and more (C) 21 days for bottom beams over 6 m spans (D) All the above
Description : According to IS specifications, the compressive strength of ordinary Portland cement after three days should not be less than (A) 7 MPa (B) 11.5 MPa (C) 16 MPa (D) 21 MPa
Last Answer : Answer: Option C
Description : The compressive strength an ordinary Portland cement (1:3) after 7 days test should not be less than. (a) 11N/mm2 (b) 17.5 N/mm2 (c) 22 N/mm2 (d) 27.5N/m2
Last Answer : (b) 17.5 N/mm2
Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.
Last Answer : (c) High alumina cement
Description : For Ordinary Portland cement concrete exposed to dry and hot weather conditions, good moist curing period is [ A ] 7 days [ B ] 10 days [ C ] 14 days [ D ] None of the above
Last Answer : [ B ] 10 days
Description : Minimum compressive strength of cement required at the age of 3 days for ordinary Portland cement of grade 33 is [ A ] 1.15 N/mm2 [ B ] 11.5 N/mm2 [ C ] 2.10 N/mm2 [ D ] 21 N/mm2
Last Answer : [ B ] 11.5 N/mm2
Description : What is the area in floriculture (in 000 hectare) in India ? (A) 40 – 50 (B) 60 – 80 (C) 100 – 120 (D) None of these
Last Answer : (C) 100 – 120
Description : The width of nursery bed should be ….. a. 100-120 cm b. 30-60 cm c. 15-30 cm d. 70 -80 cm
Last Answer : a. 100-120 cm
Description : Which of the following ranges best represents the strength of a hydrogen bond? (a) 5-10 kcals (b) 60-80 kcals (c) 80-100 kcals (d) 100-120 kcals
Last Answer : 5-10 kcals
Description : Out of 5 women and 4 men, a committee of three members is to be formed in such a way that at least one member is woman. In how many different ways can this be done? 1) 60 2) 100 3) 120 4) 90 5) 80
Last Answer : 5) 80
Description : What is the area in floriculture (in 1000 hectare) in India a) 40 - 50 b) 60 - 80 c) 100 - 120 d) None of these
Last Answer : c) 100 - 120
Description : Pick up the incorrect statement from the following: (A) The degree of grinding of cement, is called fineness (B) The process of changing cement paste into hard mass, is known as setting of ... (D) The heat generated during chemical reaction of cement with water, is known as heat of hydration
Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement
Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement
Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement
Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement
Description : Addition of pozzolana to ordinary Portland cement increases (A) Bleeding (B) Shrinkage (C) Permeability (D) Heat of hydration
Description : Which of the following cements is suitable for use in massive concrete structures such as large dams? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement
Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement
Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement
Last Answer : [ C ] Low heat cement
Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement
Last Answer : [ A ] Ordinary Portland cement
Description : Low heat cement contains more amount of __________ than that of ordinary Portland cement [ A ] C3S [ B ] C2S [ C ] C3A [ D ] None of the above
Last Answer : [ B ] C2S
Description : 120 men can lay a road 80 km long in 20 days. In how many days can 100 men lay a road of length 90 km?
Last Answer : 120 men can lay a road 80 km long in 20 days. In how many days can 100 men lay a road of length 90 km?
Description : The life span of RBc is of a. 80 days b. 100 days c. 120 days d. 140 days
Last Answer : 120 days
Description : The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %
Last Answer : (B) 40
Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%
Last Answer : (c) 70 to 80%
Description : To hydrate 500kg of cement full water needed, is (A) 100 kg (B) 110 kg (C) 120 kg (D) 130 kg
Description : `C(s)+O_(2)(g)rarr CO_(2)(g)+94.0` K cal. `CO(g)+(1)/(2)O_(2)(g)rarr CO_(2)(g), Delta H=-67.7` K cal. From the above reactions find how much heat (Kca
Last Answer : `C(s)+O_(2)(g)rarr CO_(2)(g)+94.0` K cal. `CO(g)+(1)/(2)O_(2)(g)rarr CO_(2)(g), Delta H=-67.7` K cal. ... g)` A. `20.6` B. `26.3` C. `44.2` D. `161.6`
Description : The heat of combustion of `CH_(4(g)), C_((g))` and `H_(2(g))` at `25^(@)C` are `-212.4` K cal, -94.0 K cal and -68.4 K cal respectively, the heat of f
Last Answer : The heat of combustion of `CH_(4(g)), C_((g))` and `H_(2(g))` at `25^(@)C` are `-212.4` K cal, -94.0 ... .4` K cal C. `-375.2` K cal D. `+212.8` K cal
Description : Heat of reaction for, `CO(g)+1//2O_(2)(g)rarr CO_(2)(g)` at constant V is -67.71 K cal at `17^(@)C` . The heat of reaction at constant P at `17^(@)C`
Last Answer : Heat of reaction for, `CO(g)+1//2O_(2)(g)rarr CO_(2)(g)` at constant V is -67.71 K cal at `17^(@)C` . ... B. `+68.0` K cal C. `-67.4` K cal D. None
Description : The specific heat of water is (A) 0.5 Cal/g (B) 2 Cal/g (C) 1 Cal/g (D) 4 Cal/g
Last Answer : (C) 1 Cal/g
Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option
Last Answer : (C) 120 N/mm
Description : On piles, the drop must be at least (A) 80 cm (B) 100 cm (C) 120 cm (D) 140 cm
Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m
Description : If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μg/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L
Last Answer : B. 80 L
Description : 2 If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μg/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L
Description : If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μ g/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L
Description : The ordinary and maximum tolerance limit of sound by human being is – (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)
Last Answer : (2) 60 db to 80 db (decibel) Explanation: Normal speech is about 60 dB (decibels). A dangerous sound is anything that is 80 dB or higher which can lead to hearing loss. At 70 dB or ... the risk of harm to healthy ears is negligible. Listening to sound above 80 decibels can cause profound deafness.
Description : The ordinary and maximum tolerance limit of sound by human being is (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)
Last Answer : 60 db to 80 db (decibel)
Description : The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less than 170Kg/cm2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm2 /gm. (A) 800 (B) 1600 (C) 4000 (D) 8500
Last Answer : (B) 1600
Description : The echo (reflected sounD. will be distinctly heard only at ordinary temperatures if the distance of the reflecting surfaces from the source of sound is at least ----? A. 1120 ft B. 120 ft C. 56 ft (Answer) D. 100 ft E. None of these
Last Answer : C. 56 ft (Answer)
Description : A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80
Last Answer : (C) 0.75