The percentage of voids in cement is approximately
(A) 25 %
(B) 40 %
(C) 60 %
(D) 80 %

1 Answer

Answer :

(B) 40

Related questions

Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %

Last Answer : Answer: Option D

Description : Percentage of pozzolanic material containing clay upto 80% used for the manufacture of pozzolana cement, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (A) 30 %

Description : The percentage of alumina in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80 %

Last Answer : Answer: Option B

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

Description : If the degree of saturation of a partially saturated soil is 60%, then air content of the soil is (A) 40 % (B) 60 % (C) 80 % (D) 100 %

Last Answer : (A) 40 %

Description : For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Last Answer : Answer: Option D

Description : If 1500 g of water is required to have a cement paste 1875 g of normal consistency, the percentage of water is, (A) 20 % (B) 25 % (C) 30 % (D) 35 %

Last Answer : (B) 25 %

Description : By selling 90 oranges for Rs 80, a man loses 40 %. How many oranges should he sell approximately for Rs 48 to gain 40 % in the transaction?

Last Answer : Let S.P. of 90 oranges be Rs. x. Then, 60 : 80 = 140 : x  x = 80*140/60= 186.66 For Rs.186.66, oranges sold = 90 For Rs.48, oranges sold = 90/186.66* 48 = 23(approx.)

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

Description : 1% of voids in a concrete mix would reduce its strength by about (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (A) 5 %

Description : In an all weld tensile test, the original specimen gauge length was 50mm, and after the test the increased gauge length was 65mm, what is the elongation percentage? a) % A is 40 b) % A is 60 c) % A is 30 d) % A is 36

Last Answer : c) % A is 30

Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Last Answer : A) 60-70% Cu and 30-40% Zn

Description : Rise of water table in cohesion-less soils upto ground surface reduces the net ultimate bearing capacity approximately by (A) 25 % (B) 50 % (C) 75 % (D) 90 %

Last Answer : (B) 50 %

Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Last Answer : Answer: Option B

Description : The normal consistency of ordinary Portland cement is about (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Last Answer : Answer: Option C

Description : Rapid gravity filters can remove bacterial impurities up to a maximum of  (A) 50 %  (B) 60 %  (C) 70 %  (D) 80 %

Last Answer : (D) 80 %

Description : In plain sedimentation tanks under normal conditions, impurities are removed upto  (A) 60 %  (B) 70 %  (C) 80 %  (D) 90 %

Last Answer : (B) 70 % 

Description : Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %

Last Answer : (C) 75 %

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

Description : The percentage of CO2 carrying capacity of whole blood by hemoglobin and oxyhemoglobin is (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : Answer : C

Description : Research has shown that the percentage of the total study time which could profitably be devoted to recitation as opposed to re-reading could be as high as Options: A) 20 per cent B) 40 per cent C) 60 per cent D) 80 per cent

Last Answer : D) 80 per cent

Description : The heat generated in ordinary cement at the end of 3 days is about [ A ] 60 cal/g [ B ] 80 cal/g [ C ] 100 cal/g [ D ] 120 cal/g

Last Answer : [ B ] 80 cal/g

Description : The total domestic consumption in a city water supply, is assumed (A) 20 % (B) 30 % (C) 40 % (D) 60 %

Last Answer : (D) 60 %

Description : Valid range for n, the percentage voids, is (A) 0 < n < 100 (B) 0 < n < 100 (C) n > 0 (D) n < 0

Last Answer : (A) 0 < n < 100

Description : The ratio of volume of voids to the total volume of soil mass is called (A) Air content (B) Porosity (C) Percentage air voids (D) Voids ratio

Last Answer : (B) Porosity

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Description : The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation

Last Answer : Answer: Option D

Description : Fundamental relationship between dry density ( d), specific gravity (G), water content ( ) and percentage of air voids (na) is: (A) d = (1 - na) G (1 + ) (B) d = (1 + na) G (1 + ) (C) d = (1 + na) G (1 - ) (D) d = (1 - na) G (1 - )

Last Answer : Answer: Option A

Description : Sensitivity of a soil can be defined as (A) Percentage of volume change of soil under saturated condition (B) Ratio of compressive strength of unconfined undisturbed soil to that of soil in a remoulded state (C) Ratio of volume of voids to volume of solids (D) None of the above

Last Answer : Answer: Option B

Description : The ratio of volume of air voids to the volume of total voids, is known as (A) Air content (B) Percentage air voids (C) Percentage voids (D) Porosity

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Last Answer : Answer: Option D

Description : The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Last Answer : ANS: A

Description : The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: B

Description : The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: C

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

Description : Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Last Answer : (a) 20—25 km

Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Last Answer : (b) 2.25

Description : Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %

Last Answer : Answer: Option A

Description : The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Last Answer : Answer: Option A

Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Last Answer : Answer: Option A

Description : Minimum required water cement ratio for a workable concrete, is (A) 0.30 (B) 0.40 (C) 0.50 (D) 0.60

Last Answer : Answer: Option B

Description : If water required for 1 bag of cement is 30 litres, the water cement ratio is: (A) 0.40 (B) 0.50 (C) 0.60 (D) None of these

Last Answer : Answer: Option C

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00

Last Answer : (D) 1.00

Description : If the radius of curvature of a hill road is 50 m, the percentage grade compensation should be (A) 60/R (B) 70/R (C) 75/R (D) 80/R

Last Answer : Answer: Option C

Description : Percentage of water in buffalo milk is:- a. 65-67 % b. 70-75 % c. 80-85 % d. 87-90 %

Last Answer : d. 87-90 %

Description : The conductivity of copper is less than that of silver by (A) 5 – 10 %. (B) 50 – 60 %. (C) 80 – 90 %. (D) 20 – 30 %.

Last Answer : (A) 5 – 10 %.