The bond stress for plain bars in compression is more than that for bars in tension by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

The bond stress for plain bars in compression is more than that for bars in tension by
[ A ] 25%
[ B ] 40%
[ C ] 60%
[ D ] 50%
by

1 Answer

Answer :

[ A ] 25%
by

Related questions

The bond stress for deformed bars is more than that in plain bars by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

Description : The bond stress for deformed bars is more than that in plain bars by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

Last Answer : [ B ] 40%

The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression

Description : The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression

Last Answer : Answer: Option B

The ultimate average anchorage bond stress for plain bars in tension is _______ if the grade of concrete is M20 [ A ] 1.60 N/mm2 [ B ] 1.92 N/mm2 [ C ] 2.24 N/mm2 [ D ] 2.40 N/mm2

Description : The ultimate average anchorage bond stress for plain bars in tension is _______ if the grade of concrete is M20 [ A ] 1.60 N/mm2 [ B ] 1.92 N/mm2 [ C ] 2.24 N/mm2 [ D ] 2.40 N/mm2

Last Answer : [ B ] 1.92 N/mm2

The ultimate average anchorage bond stress for plain bars in tension is _______ if the grade of concrete is M20 [ A ] 1.60 N/mm2 [ B ] 1.92 N/mm2 [ C ] 2.24 N/mm2 [ D ] 2.40 N/mm2

Description : The ultimate average anchorage bond stress for plain bars in tension is _______ if the grade of concrete is M20 [ A ] 1.60 N/mm2 [ B ] 1.92 N/mm2 [ C ] 2.24 N/mm2 [ D ] 2.40 N/mm2

Last Answer : [ B ] 1.92 N/mm2

As per IS: 456, permissible bond stress for plain bars in tension, in working stress method, where M20, is the grade of concrete [ A ] 0.6 N/mm2 [ B ] 0.8 N/mm2 [ C ] 1.0 N/mm2 [ D ] 1.2 N/mm2

Description : As per IS: 456, permissible bond stress for plain bars in tension, in working stress method, where M20, is the grade of concrete [ A ] 0.6 N/mm2 [ B ] 0.8 N/mm2 [ C ] 1.0 N/mm2 [ D ] 1.2 N/mm2

Last Answer : [ B ] 0.8 N/mm2

In working stress design, permissible bond stress in the case of deformed bars is more than that in plain bars by (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Description : In working stress design, permissible bond stress in the case of deformed bars is more than that in plain bars by (A) 10 % (B) 20 % (C) 30 % (D) 40 %

Last Answer : (D) 40 %

The ratio of bond stress for HYSD bars to that of plain bars [ A ] 0.714 [ B ] 0.9 [ C ] 1.4 [ D ] 1.8

Description : The ratio of bond stress for HYSD bars to that of plain bars [ A ] 0.714 [ B ] 0.9 [ C ] 1.4 [ D ] 1.8

Last Answer : [ C ] 1.4

In a mass concrete, the aggregates occupy a space of [ A ] 25% [ B ] 75% [ C ] 40% [ D ] 60%

Description : In a mass concrete, the aggregates occupy a space of [ A ] 25% [ B ] 75% [ C ] 40% [ D ] 60%

Last Answer : [ B ] 75%

The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Description : The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Last Answer : Answer: Option D

If 30% excess water is added, the strength of concrete is reduced by (a) 30% (b) 40% (c) 50% (d) 60%

Description : If 30% excess water is added, the strength of concrete is reduced by (a) 30% (b) 40% (c) 50% (d) 60%

Last Answer : (c) 50%

The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%

Last Answer : [ A ] 10% to 15%

If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Last Answer : Answer: Option D

The percentage of water for making a cement paste of normal consistency varies from (a) 15 to 25% (b) 25 to 35% (c) 35 to 50% (d) 50 to 60%

Description : The percentage of water for making a cement paste of normal consistency varies from (a) 15 to 25% (b) 25 to 35% (c) 35 to 50% (d) 50 to 60%

Last Answer : (b) 25 to 35%

For ductility consideration, the maximum percentage of steel used should not exceed ------- of the balanced steel [ A ] 25% [ B ] 50% [ C ] 60% [ D ] 75%

Description : For ductility consideration, the maximum percentage of steel used should not exceed ------- of the balanced steel [ A ] 25% [ B ] 50% [ C ] 60% [ D ] 75%

Last Answer : [ D ] 75%

Protein content of soyabean is about (A) 30% (B) 40% (C) 50% (D) 60%

Description : Protein content of soyabean is about (A) 30% (B) 40% (C) 50% (D) 60%

Last Answer : Answer : B

Gasohol is a mixture of a) 90% ethanol + 10% gasoline b) 10% ethanol + 90% gasoline c) 40% ethanol + 60% gasoline d) 50% ethanol + 50% gasoline

Description : Gasohol is a mixture of a) 90% ethanol + 10% gasoline b) 10% ethanol + 90% gasoline c) 40% ethanol + 60% gasoline d) 50% ethanol + 50% gasoline

Last Answer : Answer: b Explanation: 10% ethanol + 90% gasoline makes gashol.

Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%

Description : Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%

Last Answer : ANSWER : D

how much of total coal produced is used in brick kilns? A. 40% B. 50% C. 60% D. 70%

Description : how much of total coal produced is used in brick kilns? A. 40% B. 50% C. 60% D. 70%

Last Answer : ANSWER: C

how much of total coal produced is used in brick kilns? A. 40% B. 50% C. 60% D. 70%

Description : how much of total coal produced is used in brick kilns? A. 40% B. 50% C. 60% D. 70%

Last Answer : ANSWER: C

Net profit after tax of Rs. 2,00,000 is Rs. 4,00,000. Share capital is Rs. 8,00,000 and revenue reserve is Rs. 2,00,000. What is rate of return on equity ? (A) 40% (B) 50% (C) 60% (D) 75%

Description : Net profit after tax of Rs. 2,00,000 is Rs. 4,00,000. Share capital is Rs. 8,00,000 and revenue reserve is Rs. 2,00,000. What is rate of return on equity ? (A) 40% (B) 50% (C) 60% (D) 75%

Last Answer : Answer: 40%

Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Description : Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Last Answer : D. 80% to 90%

Higher plant efficiency up to______ over the entire load range. a. 30%-50% b. 20%-40% c. 60%-90% d. 50%-80%

Description : Higher plant efficiency up to______ over the entire load range. a. 30%-50% b. 20%-40% c. 60%-90% d. 50%-80%

Last Answer : a. 30%-50%

Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Description : Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%

Last Answer : b.35% - 40%

By what percentage can airbags reduce the risk of dying in a direct frontal crash? a) 30% b) 40% c) 50% d) 60%

Description : By what percentage can airbags reduce the risk of dying in a direct frontal crash? a) 30% b) 40% c) 50% d) 60%

Last Answer : a) 30%

By what percentage do seatbelts reduce the risk of death for a person sitting in front seat? a) 40% b) 50% c) 60% d) 70%

Description : By what percentage do seatbelts reduce the risk of death for a person sitting in front seat? a) 40% b) 50% c) 60% d) 70%

Last Answer : b) 50%

A man buys milk at Rs. 2.40 per litre. He adds one-third water to it and sells the mixture at Rs. 2.88 per litre. Find his profit percentage. (Assume water is free). a) 21% b) 30% c) 40% d) 50% e) 60%

Description : A man buys milk at Rs. 2.40 per litre. He adds one-third water to it and sells the mixture at Rs. 2.88 per litre. Find his profit percentage. (Assume water is free). a) 21% b) 30% c) 40% d) 50% e) 60%

Last Answer : Let say he purchases 3 litres of milk whose cost is Rs. 7.20 He adds 1 litre of water and the mixture of 4 litres is sold at Rs 2.88 × 4 = Rs11.52 Profit percentage = (11.52 – 7.20) × 100.0/7.20 = 4.32 × 100.0/7.2 = 60% Answer: e)

Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn

Last Answer : A) 60-70% Cu and 30-40% Zn

Countries in the Pacific Rim encompass ---- of the world's population. A)40% B)50% C)60% D)70%

Description : Countries in the Pacific Rim encompass ---- of the world's population. A)40% B)50% C)60% D)70%

Last Answer : C)60%

Sridevi sells an article at a profit of 50%. If she had bought it at 40% less and sold it for Rs.21.50 less, She would have gained 60%. Find the cost price of the article.

Description : Sridevi sells an article at a profit of 50%. If she had bought it at 40% less and sold it for Rs.21.50 less, She would have gained 60%. Find the cost price of the article.

Last Answer : 1st selling price=150% of x = 150x/100 = 15x/10 New Cost price=60% of x = 60x/100 = 6x/10  2nd selling price = 160% of 6x/10 = 160/100 * 6x/10 = 96x/100  Therefore 15x/10 – 96x/100 = Rs.21.50  X=Rs.39.81  Therefore cost price of the article = Rs.40 (approx.)

Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area

Description : Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area

Last Answer : Option D

In a singly reinforced concrete beam, as the load increases. (a) Only concrete will resist tension (b) Only steel bars will resist tension. (c) Both concrete and steel will resist tension. (d) Both concrete and steel will resist compression.

Description : In a singly reinforced concrete beam, as the load increases. (a) Only concrete will resist tension (b) Only steel bars will resist tension. (c) Both concrete and steel will resist tension. (d) Both concrete and steel will resist compression.

Last Answer : (b) Only steel bars will resist tension.

In a singly reinforced concrete beam, if the load is vey small. (a) Only concrete will resist tension (b) Only steel bars will resist tension. (c) Both concrete & steel will resist tension. (d) Both concrete & steel will resist compression.

Description : In a singly reinforced concrete beam, if the load is vey small. (a) Only concrete will resist tension (b) Only steel bars will resist tension. (c) Both concrete & steel will resist tension. (d) Both concrete & steel will resist compression.

Last Answer : (c) Both concrete & steel will resist tension.

For 100% modulation, power in each sideband is ________ of that of carrier? a) 50% b) 70% c) 60% d) 25%

Description : For 100% modulation, power in each sideband is ________ of that of carrier? a) 50% b) 70% c) 60% d) 25%

Last Answer : Ans: D

The profit made by David in selling his calculator for Rs.400 would be the same as the loss he would have made in selling it at a 25% loss. If he sold his calculator after offering a discount of Rs.100, find the percentage at which he marked it above the cost price. a)56.25% b)62.5% c)60% d)50%

Description : The profit made by David in selling his calculator for Rs.400 would be the same as the loss he would have made in selling it at a 25% loss. If he sold his calculator after offering a discount of Rs.100, find the percentage at which he marked it above the cost price. a)56.25% b)62.5% c)60% d)50%

Last Answer : a)56.25%

The minimum fore at cover necessary to maintain ecological balance is (a) 50% of the total land area (b) 40% of the total land area (c) 33% of the total land area (d) 25% of the total land area

Description : The minimum fore at cover necessary to maintain ecological balance is (a) 50% of the total land area (b) 40% of the total land area (c) 33% of the total land area (d) 25% of the total land area

Last Answer : Ans: (c)

battery must be turned over to a charging station in winter if discharged by a) 50% b) 40% c) 30% d) 25%

Description : battery must be turned over to a charging station in winter if discharged by a) 50% b) 40% c) 30% d) 25%

Last Answer : d) 25%

Vinegar is a (a) 5% solution of acetic acid in water (b) 25% solution of acetic acid in water (c) 50% solution of acetic acid in water (d) 40% solution of formic acid in water

Description : Vinegar is a (a) 5% solution of acetic acid in water (b) 25% solution of acetic acid in water (c) 50% solution of acetic acid in water (d) 40% solution of formic acid in water

Last Answer : 5% solution of acetic acid in water

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

As per IS: 1139, permissible stress in compression steel reinforcement for High Yield strength deformed bars is [ A ] 140 N/mm2 [ B ] 190 N/mm2 [ C ] 230 N/mm2 [ D ] 415 N/mm2

Description : As per IS: 1139, permissible stress in compression steel reinforcement for High Yield strength deformed bars is [ A ] 140 N/mm2 [ B ] 190 N/mm2 [ C ] 230 N/mm2 [ D ] 415 N/mm2

Last Answer : [ B ] 190 N/mm2

If the bond stress developed in a reinforced concrete beam is more than permissible value, it can be brought down by. (a) Increasing the depth of beam (b) Increasing the number of bars. (c) Decreasing the diameter of the bars (d) All of these

Description : If the bond stress developed in a reinforced concrete beam is more than permissible value, it can be brought down by. (a) Increasing the depth of beam (b) Increasing the number of bars. (c) Decreasing the diameter of the bars (d) All of these

Last Answer : (d) All of these

Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable places to serve as shear reinforcement (C) Are bent down at suitable places to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Description : Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable ... to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Last Answer : Answer: Option C

The main reason for providing number of reinforcing bars at a support in a simply supported beam is to resist in that zone (A) Compressive stress (B) Shear stress (C) Bond stress (D) Tensile stress

Description : The main reason for providing number of reinforcing bars at a support in a simply supported beam is to resist in that zone (A) Compressive stress (B) Shear stress (C) Bond stress (D) Tensile stress

Last Answer : Answer: Option C

When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these

Description : When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these

Last Answer : (a) Bond stress

What is the value of Three-Year 4.25% Annual Coupon Bond Puttable at Par one year from now if one year forward rates at T (0), T (1) and T (2) are 2.50%, 3% and 4.5% respectively? a) 101.54 b) 101.71 c) 102.67 d) 102.89

Description : What is the value of Three-Year 4.25% Annual Coupon Bond Puttable at Par one year from now if one year forward rates at T (0), T (1) and T (2) are 2.50%, 3% and 4.5% respectively? a) 101.54 b) 101.71 c) 102.67 d) 102.89

Last Answer : c) 102.67

The force which develops in a pressure conduit supported on trestles, is (A) Tension (B) Compression (C) Temperature stress (D) Flexural stress

Description : The force which develops in a pressure conduit supported on trestles, is  (A) Tension  (B) Compression  (C) Temperature stress  (D) Flexural stress

Last Answer : (D) Flexural stress

According to the steel beam theory of doubly reinforced beams (A) Tension is resisted by tension steel (B) Compression is resisted by compression steel (C) Stress in tension steel equals the stress in compression steel (D) All the above

Description : According to the steel beam theory of doubly reinforced beams (A) Tension is resisted by tension steel (B) Compression is resisted by compression steel (C) Stress in tension steel equals the stress in compression steel (D) All the above

Last Answer : Answer: Option D

A fire hose has a nozzle attached to it, and the nozzle discharges a jet of water into the atmosphere at a velocity of 20 m/s. this causes the joint of the nozzle with the hose to be in : (a) Tension (b) A state of zero stress (c) Compression (d) Bending stress

Description : A fire hose has a nozzle attached to it, and the nozzle discharges a jet of water into the atmosphere at a velocity of 20 m/s. this causes the joint of the nozzle with the hose to be in : (a) Tension (b) A state of zero stress (c) Compression (d) Bending stress

Last Answer : (a) Tension

The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete is (a) Uniform compression throughout (b) Zero at one end and compression at the other end (c) Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Description : The base of a column is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to moment, then the bearing pressure between the base and the concrete ... Tension at one end and compression at the other end (d) Compression, verying as a parabolic profile

Last Answer : (b) Zero at one end and compression at the other end

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

Design yield stress for steel in tension and compression is [ A ] 0.65 fy [ B ] 0.87 fy [ C ] 0.75 fy [ D ] None of the above

Description : Design yield stress for steel in tension and compression is [ A ] 0.65 fy [ B ] 0.87 fy [ C ] 0.75 fy [ D ] None of the above

Last Answer : [ B ] 0.87 fy