Description : The bond stress for plain bars in compression is more than that for bars in tension by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%
Last Answer : [ A ] 25%
Description : In working stress design, permissible bond stress in the case of deformed bars is more than that in plain bars by (A) 10 % (B) 20 % (C) 30 % (D) 40 %
Last Answer : (D) 40 %
Description : The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression
Last Answer : Answer: Option B
Description : Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.
Last Answer : [ A ] 0.12% of gross cross sectional area
Description : The ultimate average anchorage bond stress for plain bars in tension is _______ if the grade of concrete is M20 [ A ] 1.60 N/mm2 [ B ] 1.92 N/mm2 [ C ] 2.24 N/mm2 [ D ] 2.40 N/mm2
Last Answer : [ B ] 1.92 N/mm2
Description : As per IS: 456, permissible bond stress for plain bars in tension, in working stress method, where M20, is the grade of concrete [ A ] 0.6 N/mm2 [ B ] 0.8 N/mm2 [ C ] 1.0 N/mm2 [ D ] 1.2 N/mm2
Last Answer : [ B ] 0.8 N/mm2
Description : The ratio of bond stress for HYSD bars to that of plain bars [ A ] 0.714 [ B ] 0.9 [ C ] 1.4 [ D ] 1.8
Last Answer : [ C ] 1.4
Description : In a mass concrete, the aggregates occupy a space of [ A ] 25% [ B ] 75% [ C ] 40% [ D ] 60%
Last Answer : [ B ] 75%
Description : The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%
Last Answer : Answer: Option D
Description : If 30% excess water is added, the strength of concrete is reduced by (a) 30% (b) 40% (c) 50% (d) 60%
Last Answer : (c) 50%
Description : The tensile strength of concrete is about ________ of its compressive strength [ A ] 10% to 15% [ B ] 30% to 40% [ C ] 50% [ D ] 60% to 75%
Last Answer : [ A ] 10% to 15%
Description : As per IS: 1139, permissible stress in compression steel reinforcement for High Yield strength deformed bars is [ A ] 140 N/mm2 [ B ] 190 N/mm2 [ C ] 230 N/mm2 [ D ] 415 N/mm2
Last Answer : [ B ] 190 N/mm2
Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous
Description : The percentage of water for making a cement paste of normal consistency varies from (a) 15 to 25% (b) 25 to 35% (c) 35 to 50% (d) 50 to 60%
Last Answer : (b) 25 to 35%
Description : For ductility consideration, the maximum percentage of steel used should not exceed ------- of the balanced steel [ A ] 25% [ B ] 50% [ C ] 60% [ D ] 75%
Last Answer : [ D ] 75%
Description : Protein content of soyabean is about (A) 30% (B) 40% (C) 50% (D) 60%
Last Answer : Answer : B
Description : Gasohol is a mixture of a) 90% ethanol + 10% gasoline b) 10% ethanol + 90% gasoline c) 40% ethanol + 60% gasoline d) 50% ethanol + 50% gasoline
Last Answer : Answer: b Explanation: 10% ethanol + 90% gasoline makes gashol.
Description : Volumetric efficiency of air compressor is of the order of A. 20% to 30 % B. 40% to 50% C. 60% to 70% D. 70% to 90%
Last Answer : ANSWER : D
Description : how much of total coal produced is used in brick kilns? A. 40% B. 50% C. 60% D. 70%
Last Answer : ANSWER: C
Description : Net profit after tax of Rs. 2,00,000 is Rs. 4,00,000. Share capital is Rs. 8,00,000 and revenue reserve is Rs. 2,00,000. What is rate of return on equity ? (A) 40% (B) 50% (C) 60% (D) 75%
Last Answer : Answer: 40%
Description : Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%
Last Answer : D. 80% to 90%
Description : Higher plant efficiency up to______ over the entire load range. a. 30%-50% b. 20%-40% c. 60%-90% d. 50%-80%
Last Answer : a. 30%-50%
Description : Rankine cycle efficiency in a good steam power station may be in the range between........ a.15% - 20% b.35% - 40% c.50% - 60% d.90% - 95%
Last Answer : b.35% - 40%
Description : By what percentage can airbags reduce the risk of dying in a direct frontal crash? a) 30% b) 40% c) 50% d) 60%
Last Answer : a) 30%
Description : By what percentage do seatbelts reduce the risk of death for a person sitting in front seat? a) 40% b) 50% c) 60% d) 70%
Last Answer : b) 50%
Description : A man buys milk at Rs. 2.40 per litre. He adds one-third water to it and sells the mixture at Rs. 2.88 per litre. Find his profit percentage. (Assume water is free). a) 21% b) 30% c) 40% d) 50% e) 60%
Last Answer : Let say he purchases 3 litres of milk whose cost is Rs. 7.20 He adds 1 litre of water and the mixture of 4 litres is sold at Rs 2.88 × 4 = Rs11.52 Profit percentage = (11.52 – 7.20) × 100.0/7.20 = 4.32 × 100.0/7.2 = 60% Answer: e)
Description : Brass is an alloy of copper and zinc having the relative percentage (A) 60-70% Cu and 30-40% Zn (B) 50-60% Cu and 40-50% Zn (C) 40-50 % Cu and 60-50% Zn (D) 30-40 % Cu and 60-70% Zn
Last Answer : A) 60-70% Cu and 30-40% Zn
Description : Countries in the Pacific Rim encompass ---- of the world's population. A)40% B)50% C)60% D)70%
Last Answer : C)60%
Description : Sridevi sells an article at a profit of 50%. If she had bought it at 40% less and sold it for Rs.21.50 less, She would have gained 60%. Find the cost price of the article.
Last Answer : 1st selling price=150% of x = 150x/100 = 15x/10 New Cost price=60% of x = 60x/100 = 6x/10 2nd selling price = 160% of 6x/10 = 160/100 * 6x/10 = 96x/100 Therefore 15x/10 – 96x/100 = Rs.21.50 X=Rs.39.81 Therefore cost price of the article = Rs.40 (approx.)
Description : Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area
Last Answer : Option D
Description : For 100% modulation, power in each sideband is ________ of that of carrier? a) 50% b) 70% c) 60% d) 25%
Last Answer : Ans: D
Description : The profit made by David in selling his calculator for Rs.400 would be the same as the loss he would have made in selling it at a 25% loss. If he sold his calculator after offering a discount of Rs.100, find the percentage at which he marked it above the cost price. a)56.25% b)62.5% c)60% d)50%
Last Answer : a)56.25%
Description : The minimum fore at cover necessary to maintain ecological balance is (a) 50% of the total land area (b) 40% of the total land area (c) 33% of the total land area (d) 25% of the total land area
Last Answer : Ans: (c)
Description : battery must be turned over to a charging station in winter if discharged by a) 50% b) 40% c) 30% d) 25%
Last Answer : d) 25%
Description : Vinegar is a (a) 5% solution of acetic acid in water (b) 25% solution of acetic acid in water (c) 50% solution of acetic acid in water (d) 40% solution of formic acid in water
Last Answer : 5% solution of acetic acid in water
Description : The percentage of reinforcement in case of slabs, when high strength deformed bars are used is not less than (A) 0.15 (B) 0.12 (C) 0.30 (D) 1.00
Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete
Last Answer : (a) 0.12% of the gross area of concrete
Description : In the reinforced cement concrete structure, the steel reinforcement consists of . (a) Deformed bars (b) Cold twisted bars (c) Mildsteel and medium tensile steel bars (d) All of these
Last Answer : (d) All of these
Description : As per IS:1139, the characteristic yield strength for cold twisted deformed bars is [ A ] 250 N/mm2 [ B ] 415 N/mm2 [ C ] 500 N/mm2 [ D ] 550 N/mm2
Last Answer : [ C ] 500 N/mm2
Description : As per IS:1139, the characteristic yield strength for hot rolled High yield strength deformed bars is [ A ] 250 N/mm2 [ B ] 415 N/mm2 [ C ] 500 N/mm2 [ D ] 550 N/mm2
Last Answer : [ B ] 415 N/mm2
Description : If the bond stress developed in a reinforced concrete beam is more than permissible value, it can be brought down by. (a) Increasing the depth of beam (b) Increasing the number of bars. (c) Decreasing the diameter of the bars (d) All of these
Description : Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable ... to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress
Last Answer : Answer: Option C
Description : The main reason for providing number of reinforcing bars at a support in a simply supported beam is to resist in that zone (A) Compressive stress (B) Shear stress (C) Bond stress (D) Tensile stress
Description : When the steel bars are embedded in concrete. The concrete after setting, adheres to the surface of the bars and thus resist any force that tends to pull or push this road. The intensity of this adhesive force is called. (a) Bond stress (b) Shear stress (c) Compressive stress (d) All of these
Last Answer : (a) Bond stress
Description : What is the value of Three-Year 4.25% Annual Coupon Bond Puttable at Par one year from now if one year forward rates at T (0), T (1) and T (2) are 2.50%, 3% and 4.5% respectively? a) 101.54 b) 101.71 c) 102.67 d) 102.89
Last Answer : c) 102.67
Description : A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40 (D) None of these
Last Answer : (D) None of these
Description : If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km
Last Answer : .8
Description : Pozzolana is essentially a silicious material containing clay up to (a) 20% (b) 40% (c) 60% (d) 80%
Last Answer : (d) 80%