Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab
[ A ] Upper bound
[ B ] Lower bound
[ C ] Upper bound and lower bound respectively
[ D ] None of the above.
by

1 Answer

Answer :

[ A ] Upper bound
by

Related questions

The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of structure (c) The lower bound on the strength of structure (d) The upper bound on the strength of structure

Description : The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of ... The lower bound on the strength of structure (d) The upper bound on the strength of structure

Last Answer : (b) The upper and lower bounds respectively on the strength of structure

Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Description : Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Last Answer : [ A ] Equal values

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

Description : The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

Last Answer : [ C ] Will coincide with

Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Description : Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Last Answer : [ B ] Lower bound solution

The ultimate load capacity of slabs can be determined by using the principle of i.Super position ii.Virtual work iii. Equilibrium [ A ] i [ B ] ii [ C ] i and iii [ D ] ii and iii

Description : The ultimate load capacity of slabs can be determined by using the principle of i.Super position ii.Virtual work iii. Equilibrium [ A ] i [ B ] ii [ C ] i and iii [ D ] ii and iii

Last Answer : [ D ] ii and iii

Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory (A) (wx /wy ) = (ly /lx ) (B) (wx/wy) = (ly/lx)² (C) (wx /wy ) = (ly /lx )4 (D) None of these

Description : Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory (A) (wx /wy ) = (ly /lx ) (B) (wx/wy) = (ly/lx)² (C) (wx /wy ) = (ly /lx )4 (D) None of these

Last Answer : Answer: Option C

Why is it upper bound and lower bound and not higher bound and lower bound?

Description : Why is it upper bound and lower bound and not higher bound and lower bound?

Last Answer : My first search revealed this is a mathematical concept. So you should direct this question to whoever first coined the term. The definition is below. https://www.mathsisfun.com/definitions/upper-bound.html

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

Assertion Upper wire shown in figure is fixed. At a certain distance x,lower wire can remain in equilibrium. Reason The above equilibrium of lower wir

Description : Assertion Upper wire shown in figure is fixed. At a certain distance x,lower wire can remain in equilibrium. Reason The above equilibrium of lower wir

Last Answer : Assertion Upper wire shown in figure is fixed. At a certain distance x,lower wire can ... above equilibrium of lower wire is stable equilibrium.

Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned respectively near to the bottom of the lower pulley and inside the sphere, over the upper pulley. The top electrode is connected to the sphere and the bottom one to the ground. A high DC potential is applied to the upper pulley. A simple version of which equipment is being described here?

Description : belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned ... potential is applied to the upper pulley. A simple version of which equipment is being described here?

Last Answer : Van de Graaff generator.

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than (A) WL/12 (L - 2D/3)² (B) WL/10 (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

Distribution reinforcement in a simply supported slab, is provided to distribute (A) Load (B) Temperature stress (C) Shrinkage stress (D) All the above

Description : Distribution reinforcement in a simply supported slab, is provided to distribute (A) Load (B) Temperature stress (C) Shrinkage stress (D) All the above

Last Answer : Answer: Option D

If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is (A) K/x (1 + x/d) + bw (B) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Description : If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured ... ) Kx (1 - x/l) + bw (C) Kx (1 + x/l) + bw (D) All the above

Last Answer : Answer: Option B

For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is (A) 1 (B) 2 (C) 3 (D) 5

Description : For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is (A) 1 (B) 2 (C) 3 (D) 5

Last Answer : Answer: Option B

If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero

Description : If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) Zero

Last Answer : Answer: Option C

If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) w1/w2 = l2/l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Description : If l1 and l2 are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w1 and w2acting on strips parallel to l2 and l1 is (A) ... l1 (B) w1/w2 = (l2/l1)² (C) w1/w2 = (l2/l1)3 (D) w1/w2 = (l2/l1)

Last Answer : Answer: Option D

is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16

Description : is the load on a circular slab of radius , the maximum radial moment at the centre of the slab, is (A) WR²/16 (B) 2WR²/16 (C) 3WR²/16 (D) 5WR²/16

Last Answer : Answer: Option C

The design of heel slab of a retaining wall is based on the maximum bending moment due to: (A) Its own weight (B) Weight of the soil above it (C) Load of the surcharge, if any (D) All the above

Description : The design of heel slab of a retaining wall is based on the maximum bending moment due to: (A) Its own weight (B) Weight of the soil above it (C) Load of the surcharge, if any (D) All the above

Last Answer : Answer: Option D

If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16(D) None of these

Description : If is the uniformly distributed load on a circular slab of radius fixed at its ends, the maximum positive radial moment at its centre, is (A) 3WR²/16 (B) 2WR²/16 (C) WR²/16 (D) None of these

Last Answer : Answer: Option C

Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Last Answer : Answer: Option B

When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Description : When load is applied on concrete pavement (A) Away from edges, the maximum bending moment is negative (B) Away from edges, the maximum bending moment cause compression (C) On the edges, the maximum stress is parallel to the edge of the slab (D) None of these

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed buildings rest on girders and are the main load transferring members to the columns (C) The slab is spanned across the secondary beams provided between the main beams (D) All of these

Description : Pick up the correct statement from the following: (A) The roof slabs of multi-storeyed buildings are constructed monolithically to carry the various floor loads (B) The beams of multi-storeyed ... slab is spanned across the secondary beams provided between the main beams (D) All of these

Last Answer : Answer: Option D

In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub grade resistance stress (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress (c) Wheel load stress – Temperature warping stress + Sub grade resistant stress (d) Wheel load stress – Temperature warping stress − Sub grade resistant stress

Description : In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub ... + Sub grade resistant stress (d) Wheel load stress - Temperature warping stress − Sub grade resistant stress

Last Answer : (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress

A slab simply supported on the four edges, with corners not held down and carrying uniformly distributed load, is used in (a) Singly storeyed buildings. (b) Double storeyed buildings. (c) Multi storeyed buildings (d) All the above

Description : A slab simply supported on the four edges, with corners not held down and carrying uniformly distributed load, is used in (a) Singly storeyed buildings. (b) Double storeyed buildings. (c) Multi storeyed buildings (d) All the above

Last Answer : (a) Singly storeyed buildings.

A two way slab (a) May be simply supported on the four edges, with comers not held down and carrying uniformly distributed load. (b) May be simply supported on the four edge , with corners held down and carrying uniformly distributed load. (c) May have edges fixed or continuous and carrying uniformly distributed load. (d) All the above.

Description : A two way slab (a) May be simply supported on the four edges, with comers not held down and carrying uniformly distributed load. (b) May be simply supported on the four edge , with corners held ... . (c) May have edges fixed or continuous and carrying uniformly distributed load. (d) All the above.

Last Answer : (d) All the above.

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Description : The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Last Answer : (d) All of the above.

The moments developed in the slab are influenced by the following factors i.Short span ii.Long span iii.Type of supporting edge. iv.Magnitude and type of load on slab [ A ] i, iii and iv [ B ] ii ,iii and iv [ C ] i and iii [ D ] i, ii , iii and iv

Description : The moments developed in the slab are influenced by the following factors i.Short span ii.Long span iii.Type of supporting edge. iv.Magnitude and type of load on slab [ A ] i, iii and iv [ B ] ii ,iii and iv [ C ] i and iii [ D ] i, ii , iii and iv

Last Answer : [ D ] i, ii , iii and iv

The asymptotic upper bound solution of the recurrence relation given by T(n)= 2T(n/2)+n/log n is: (1) O(n2) (2) O(n log n) (3) O(n log log n) (4) O(log log n)

Description : The asymptotic upper bound solution of the recurrence relation given by T(n)= 2T(n/2)+n/log n is: (1) O(n2) (2) O(n log n) (3) O(n log log n) (4) O(log log n)

Last Answer : (3) O(n log log n) 

During drying operation, it is easier to remove the __________ moisture. (A) Equilibrium (B) Critical (C) Unbound (D) Bound

Description : During drying operation, it is easier to remove the __________ moisture. (A) Equilibrium (B) Critical (C) Unbound (D) Bound

Last Answer : (C) Unbound

Moisture in a substance exerting an equilibrium vapour pressure less than that of pure liquid at the same temperature is called the __________ moisture. (A) Bound (B) Unbound (C) Critical (D) None of these

Description : Moisture in a substance exerting an equilibrium vapour pressure less than that of pure liquid at the same temperature is called the __________ moisture. (A) Bound (B) Unbound (C) Critical (D) None of these

Last Answer : (A) Bound

Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and equilibrium moisture in a solid is called the critical moisture (D) The driving force for mass transfer in a wet solid is its free moisture content

Description : Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and ... (D) The driving force for mass transfer in a wet solid is its free moisture content

Last Answer : (D) The driving force for mass transfer in a wet solid is its free moisture content

Moisture contained by a substance in excess of the equilibrium moisture is called the __________ moisture. (A) Unbound (B) Free (C) Critical (D) Bound

Description : Moisture contained by a substance in excess of the equilibrium moisture is called the __________ moisture. (A) Unbound (B) Free (C) Critical (D) Bound

Last Answer : (B) Free

All moisture in a non-hygroscopic material is the __________ moisture. (A) Free (B) Equilibrium (C) Unbound (D) Bound

Description : All moisture in a non-hygroscopic material is the __________ moisture. (A) Free (B) Equilibrium (C) Unbound (D) Bound

Last Answer : (C) Unbound

Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Description : Bound moisture is that liquid which exerts an equilibrium vapor pressure __________ that of the pure liquid at the given temperature. (A) Less than (B) More than (C) Equal to (D) Either (A) or (B); depends on the solid

Last Answer : (A) Less than

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

Moisture content of a substance when at equilibrium with a given partial pressure of the vapour is called the __________ moisture. (A) Free (B) Unbound (C) Equilibrium (D) Bound

Description : Moisture content of a substance when at equilibrium with a given partial pressure of the vapour is called the __________ moisture. (A) Free (B) Unbound (C) Equilibrium (D) Bound

Last Answer : (C) Equilibrium

In a limit state method of design, when shear reinforcement is not provided, the calculated shear stress at the critical section of a slab shall not exceed; [ A ] Ks 0.25 v fck [ B ] ks 0.20 v fck [ C ] ks 0.16 v fck [ D ] ks 0.10 v fck

Description : In a limit state method of design, when shear reinforcement is not provided, the calculated shear stress at the critical section of a slab shall not exceed; [ A ] Ks 0.25 v fck [ B ] ks 0.20 v fck [ C ] ks 0.16 v fck [ D ] ks 0.10 v fck

Last Answer : [ A ] Ks 0.25 v fck

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

The bound charge density and free charge density are 12 and 6 units respectively. Calculate the susceptibility. a) 1 b) 0 c) 2 d) 72

Description : The bound charge density and free charge density are 12 and 6 units respectively. Calculate the susceptibility. a) 1 b) 0 c) 2 d) 72

Last Answer : c) 2

The virtual work method is based on the principle [ A ] External work done = Internal work done. [ B ] External work done + Internal work done. [ C ] External work done - Internal work done. [ D ] None of the above.

Description : The virtual work method is based on the principle [ A ] External work done = Internal work done. [ B ] External work done + Internal work done. [ C ] External work done - Internal work done. [ D ] None of the above.

Last Answer : [ A ] External work done = Internal work done.

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Description : In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Last Answer : Answer: Option C

Normally pre-stressing wires are arranged in the (A) Upper part of the beam (B) Lower part of the beam (C) Center (D) Anywhe

Description : Normally pre-stressing wires are arranged in the (A) Upper part of the beam (B) Lower part of the beam (C) Center (D) Anywhere

Last Answer : Answer: Option B

Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Description : Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Last Answer : Answer: Option C

Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Description : Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Last Answer : Answer: Option C