The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution
[ A ] May be greater than
[ B ] May be less than
[ C ] Will coincide with
[ D ] Must be less than
by

1 Answer

Answer :

[ C ] Will coincide with
by

Related questions

Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Description : Yield line theory results in [ A ] Elastic solution [ B ] Lower bound solution [ C ] Upper bound solution [ D ] Unique solution

Last Answer : [ B ] Lower bound solution

To develop complete yield line pattern the slab must be [ A ] Under reinforced [ B ] Over reinforced [ C ] Both (a) and (b) [ D ] None of the above.

Description : To develop complete yield line pattern the slab must be [ A ] Under reinforced [ B ] Over reinforced [ C ] Both (a) and (b) [ D ] None of the above.

Last Answer : [ A ] Under reinforced

The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of structure (c) The lower bound on the strength of structure (d) The upper bound on the strength of structure

Description : The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of ... The lower bound on the strength of structure (d) The upper bound on the strength of structure

Last Answer : (b) The upper and lower bounds respectively on the strength of structure

Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Description : Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Last Answer : [ A ] Upper bound

In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to reach its permissible limit before to reach yield stress in steel [ C ] stresses in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Description : In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to ... in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Last Answer : [ A ] the stress in steel to reach its yield limit before concrete failure

In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to reach its permissible limit before to reach yield stress in steel [ C ] stresses in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Description : In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to ... in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Last Answer : [ A ] the stress in steel to reach its yield limit before concrete failure

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

Why is it upper bound and lower bound and not higher bound and lower bound?

Description : Why is it upper bound and lower bound and not higher bound and lower bound?

Last Answer : My first search revealed this is a mathematical concept. So you should direct this question to whoever first coined the term. The definition is below. https://www.mathsisfun.com/definitions/upper-bound.html

Choose the wrong statement (A) The center of buoyancy is located at the center of gravity of the displaced liquid (B) For stability of a submerged body, the center of gravity of body must lie directly below the center of buoyancy (C) If C.G. and center of buoyancy coincide, the submerged body must lie at neutral equilibrium for all positions (D) All floating bodies are stable

Description : Choose the wrong statement (A) The center of buoyancy is located at the center of gravity of the displaced liquid (B) For stability of a submerged body, the center of gravity of body must ... the submerged body must lie at neutral equilibrium for all positions (D) All floating bodies are stable

Last Answer : Answer: Option D

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

The asymptotic upper bound solution of the recurrence relation given by T(n)= 2T(n/2)+n/log n is: (1) O(n2) (2) O(n log n) (3) O(n log log n) (4) O(log log n)

Description : The asymptotic upper bound solution of the recurrence relation given by T(n)= 2T(n/2)+n/log n is: (1) O(n2) (2) O(n log n) (3) O(n log log n) (4) O(log log n)

Last Answer : (3) O(n log log n) 

The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Description : The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) For channels, the shear centre does not coincide its centroid (B) The point of intersection of the bending axis with the cross section of the beam, is called shear centre (C) For I sections, the shear centre coincides with the centroid of the cross section of the beam (D) All the above

Description : Pick up the correct statement from the following:  (A) For channels, the shear centre does not coincide its centroid  (B) The point of intersection of the bending axis with the cross section ... shear centre coincides with the centroid of the cross section of the beam  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope(C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Description : Pick up the correct statement from the following: (A) A refracting telescope consists optically of two lenses (B) The principal axes of both the lenses coincide the optical axis of the telescope (C) The lens nearer the object to be viewed is convex and is called objective (D) All the above

Last Answer : (D) All the above

Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such cases, the desorption equilibrium pressure is __________ that obtained for adsorption. (A) Lower than (B) Higher than (C) Same as (D) Either same or higher than

Description : Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such ... (B) Higher than (C) Same as (D) Either same or higher than

Last Answer : (A) Lower than

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Description : To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Last Answer : b. Must be forward of the Neutral Point

Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water bound macadam during bituminous road construction (C) Seal coat is the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Description : Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water ... the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Last Answer : Answer: Option D

The total agricultural land in a village is 1200 hectares. This is distributed among 320 families who form four groups in the following pattern. It is assumed that the land is distributed equally within each group. Identify the group of small farmers. Gr ou p Num ber of Tot al am ou nt of land Fam i l i es ow ned and oper at ed by each gr oup (i n hect ar es) A 100 300 B 180 300 C 30 300 D 10 300 (1) A (2) B (3) C (4) D

Description : The total agricultural land in a village is 1200 hectares. This is distributed among 320 families who form four groups in the following pattern. It is assumed that the land is distributed equally within each group. Identify the group of small ... B 180 300 C 30 300 D 10 300 (1) A (2) B (3) C (4) D

Last Answer : B 180 300

Commonly assumed probability distribution of service pattern are ....................... a. Poisson distribution b. Exponential distribution c. Erlang distribution d. b and c

Description : Commonly assumed probability distribution of service pattern are ....................... a. Poisson distribution b. Exponential distribution c. Erlang distribution d. b and c

Last Answer : d. b and c

Commonly assumed probability distribution of arrival pattern is ....................... a. Poisson distribution b. Binomial distribution c. Normal distribution d. None of these

Description : Commonly assumed probability distribution of arrival pattern is ....................... a. Poisson distribution b. Binomial distribution c. Normal distribution d. None of these

Last Answer : a. Poisson distribution

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the Vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto (A) 5" (B) 10" (C) 15" (D) 20"

Description : The main plate of a transit is divided into 1080 equal divisions. 60 divisions of the Vernier coincide exactly with 59 divisions of the main plate. The transit can read angles accurate upto (A) 5" (B) 10" (C) 15" (D) 20"

Last Answer : (D) 20"

Flint glass (A) Has slightly the greater refracting power than crown glass (B) Has roughly double refracting power than that of crown (C) And crown glass proportions yield the required focal length and neutralise the dispersion produced by the convex lens at the emergence from the concave (D) All the above

Description : Flint glass (A) Has slightly the greater refracting power than crown glass (B) Has roughly double refracting power than that of crown (C) And crown glass proportions yield the required focal length ... dispersion produced by the convex lens at the emergence from the concave (D) All the above

Last Answer : (D) All the above

As shown in the illustration, once the "LV" relay is energized for operation, what contacts must remain closed to maintain the "LV" relay energized when the control lever is moved away from the "off" or "stop" position? A. "DBa" contact. B. Reset contacts. C. Upper set of "LVa" contacts. D. Lower set of "LVa" contacts.

Description : As shown in the illustration, once the "LV" relay is energized for operation, what contacts must remain closed to maintain the "LV" relay energized when the control lever is moved away from the "off" or "stop" ... . B. Reset contacts. C. Upper set of "LVa" contacts. D. Lower set of "LVa" contacts.

Last Answer : Answer: C

Which one of the following describes the syntax of prolog program ? I. Rules and facts are terminated by full stop (.) II. Rules and facts are terminated by semicolon (;) III. Variables names must start with upper case alphabets. IV. Variables names must start with lower case alphabets. Codes : (A) I, II (B) III, IV (C) I, III (D) II, IV

Description : Which one of the following describes the syntax of prolog program ? I. Rules and facts are terminated by full stop (.) II. Rules and facts are terminated by semicolon (;) III. Variables names must start with upper case alphabets. ... alphabets. Codes : (A) I, II (B) III, IV (C) I, III (D) II, IV

Last Answer : (C) I, III

Pick up the correct statement from the following: (A) The height of head light above road surface, is taken as 0.75 m (B) The beam of head light is up to one degree upwards from the grade of road (C) While designing the valley curve, the height of the object is assumed nil (D) All the above

Description : Pick up the correct statement from the following: (A) The height of head light above road surface, is taken as 0.75 m (B) The beam of head light is up to one degree upwards from the grade of road (C) While designing the valley curve, the height of the object is assumed nil (D) All the above

Last Answer : Answer: Option D

According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Description : According to IS:456-2000, the minimum slenderness ratio for a short column is [ A ] Less than 12 [ B ] Between 12 and 18 [ C ] Less than 18 [ D ] Must be greater than 18

Last Answer : [ A ] Less than 12

In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Description : In high temperature carbonisation of coal compared to low temperature carbonisation (A) Yield of ammonia is less (B) Aromatic content of tar is low (C) H2 content in the coke oven gas is more (D) Calorific value of the coke oven gas is lower

Last Answer : (C) H2 content in the coke oven gas is more

The internal rate of return - (1) must be less than the interest rate if the firm is to in-vest. (2) makes the present value of profits equal to the present value of costs. (3) falls as the annual yield of an investment rises. (4) is equal to the market interest rate for all the firm's in-vestment.

Description : The internal rate of return - (1) must be less than the interest rate if the firm is to in-vest. (2) makes the present value of profits equal to the present value of costs. (3) falls as the annual yield of an investment rises. (4) is equal to the market interest rate for all the firm's in-vestment.

Last Answer : (3) falls as the annual yield of an investment rises. Explanation: The internal rate of return on an investment or project is the "annualized effective compounded re-turn rate" or discount rate ... the investment equals the net present value of the benefits (positive cash flows) of the investment.

The internal rate of return (1) must be less than the interest rate if the firm is to invest. (2) makes the present value of profits equal to the present value of costs. (3) falls as the annual yield of an investment rises. (4) is equal to the market interest rate for all the firm’s investment.

Description : The internal rate of return (1) must be less than the interest rate if the firm is to invest. (2) makes the present value of profits equal to the present value of costs. (3) falls as the annual yield of an investment rises. (4) is equal to the market interest rate for all the firm’s investment. 

Last Answer : falls as the annual yield of an investment rises.

Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which transfers its load to the surrounding soil (C) A pile is a slender member which transfers its load by friction (D) A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Last Answer : Answer: Option B

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Description : In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Last Answer : Answer: Option C

Normally pre-stressing wires are arranged in the (A) Upper part of the beam (B) Lower part of the beam (C) Center (D) Anywhe

Description : Normally pre-stressing wires are arranged in the (A) Upper part of the beam (B) Lower part of the beam (C) Center (D) Anywhere

Last Answer : Answer: Option B

Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Description : Ware house pack' of cement means (A) Full capacity of the ware house (B) Pressure exertion of the bags of upper layers (C) Pressure compaction of the bags on lower layers (D) Packing the ware house

Last Answer : Answer: Option C

Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Description : Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Last Answer : Answer: Option C

Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Description : Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Last Answer : Answer: Option A

In grillage foundations a minimum 15 cm cover is provided on (A) Upper flange of top tier (B) Lower beam of lower tier (C) Ends of external beams (D) None to these

Description : In grillage foundations a minimum 15 cm cover is provided on (A) Upper flange of top tier (B) Lower beam of lower tier (C) Ends of external beams (D) None to these

Last Answer : Answer: Option B

The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Description : The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Last Answer : Answer: Option B

Which is not an adverse effect of irrigation? (a) Irrigation changes cropping pattern. (b) Water intensive crops are grown in dry areas. (c) Salinization of soil (d) Increase in crop yield.

Description : Which is not an adverse effect of irrigation? (a) Irrigation changes cropping pattern. (b) Water intensive crops are grown in dry areas. (c) Salinization of soil (d) Increase in crop yield.

Last Answer : (c) Salinization of soil

Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates 2) The fracture line runs above and parallel to the palate and crosses lower part of nasal septum, maxillary antra and the pterygoid plates 3) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Description : Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary ... ) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Last Answer : Correct Answer: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates

Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). Consider the following three lines for clipping with the given end point co-ordinates: Line AB: A(-6,2) and B(-1,8) Line CD: C(-1,5) and D(4,8) Line EF: E(-2,3) and F(1,2) Which of the following line(s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Description : Let R be the rectangular window against which the lines are to be clipped using 2D Sutherland-Cohen line clipping algorithm. The rectangular window has lower left-hand corner at (-5,1) and upper righthand corner at (3,7). ... s) is/are candidate for clipping? (A) AB (B) CD (C) EF (D) AB and CD

Last Answer : (D) AB and CD

For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of filler (B) Dry rolling, application of filler, wet rolling and application of screening (C) Dry rolling, application of screening, wet rolling and application of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Description : For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of ... of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Last Answer : Answer: Option C

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum

Which of the following is required if the professional accountant uses experts who are not professional accountants? a. The professional accountant is discouraged to engage the services of experts who are not a professional accountant. b. The ultimate responsibility for the professional service is assumed by the expert who is not a professional accountant. c. The professional accountant must take steps to see that such experts are aware of the ethical requirements of the profession. d. Experts who are not professional accountants need not be informed of ethical requirements because they are not members of the Accountancy profession

Description : Which of the following is required if the professional accountant uses experts who are not professional accountants? a. The professional accountant is discouraged to engage the services of experts ... not be informed of ethical requirements because they are not members of the Accountancy profession

Last Answer : The professional accountant must take steps to see that such experts are aware of the ethical requirements of the profession.