Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method [ A ] Equal values [ B ] Lesser values [ C ] Higher values [ D ] None of the above.

Yield line analysis by equilibrium method gives ------------------ to that of obtained by virtual work method
[ A ] Equal values
[ B ] Lesser values
[ C ] Higher values
[ D ] None of the above.
by

1 Answer

Answer :

[ A ] Equal values
by

Related questions

Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Description : Virtual work method and equilibrium method gives ---------------- to the collapse load on the slab [ A ] Upper bound [ B ] Lower bound [ C ] Upper bound and lower bound respectively [ D ] None of the above.

Last Answer : [ A ] Upper bound

Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material

Description : Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material

Last Answer : b) Distortion energy theory

Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material

Description : Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material

Last Answer : b) Distortion energy theory

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

Obtained from the roots of Piper methysticum, a lesser-known member of the Pepper family, this drink is consumed across several Pacific Ocean cultures. An entrepreneur in Vanuatu began marketing Lava Kola, an ‘antienergy’ drink that uses the basic chemical ingredient which gives the traditional drink its flavour. What drink?

Description : Obtained from the roots of Piper methysticum, a lesser-known member of the Pepper family, this drink is consumed across several Pacific Ocean cultures. An entrepreneur in Vanuatu began marketing ... that uses the basic chemical ingredient which gives the traditional drink its flavour. What drink?

Last Answer : Kava.

In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Description : In the virtual work method of plastic analysis of steel structures, the virtual quantity is (a) Slope (b) Moment (c) Load (d) Displacement

Last Answer : (d) Displacement

In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to reach its permissible limit before to reach yield stress in steel [ C ] stresses in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Description : In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to ... in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Last Answer : [ A ] the stress in steel to reach its yield limit before concrete failure

In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to reach its permissible limit before to reach yield stress in steel [ C ] stresses in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Description : In general in the design of a section by limit method, it is assumed that [ A ] the stress in steel to reach its yield limit before concrete failure [ B ] the stress in concrete to ... in both concrete and steel reach their permissible values simultaneously [ D ] none of the above are correct

Last Answer : [ A ] the stress in steel to reach its yield limit before concrete failure

At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P(D) 1/P

Description : At a given temperature, the equilibrium yield of SO3 obtained from the oxidation of SO2 is proportional to (where, P = pressure of the system). (A) P (B) √P (C) P (D) 1/P

Last Answer : (B) √P

Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Description : For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Last Answer : (C) Both (B) and (C)

The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Description : The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Last Answer : [ B ] At right angles.

channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Description : channel is said to be of most economical cross-section, if (A) It gives maximum discharge for a given cross-sectional area and bed slope (B) It has minimum wetted perimeter (C) It involves lesser excavation for the designed amount of discharge (D) All of the above

Last Answer : Answer: Option D

The ultimate load capacity of slabs can be determined by using the principle of i.Super position ii.Virtual work iii. Equilibrium [ A ] i [ B ] ii [ C ] i and iii [ D ] ii and iii

Description : The ultimate load capacity of slabs can be determined by using the principle of i.Super position ii.Virtual work iii. Equilibrium [ A ] i [ B ] ii [ C ] i and iii [ D ] ii and iii

Last Answer : [ D ] ii and iii

Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method? (A) Multiple straight line method (B) Sinking fund method (C) Declining balance method (D) Sum of the years digit method

Description : Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method? (A) Multiple straight line method (B) Sinking fund method (C) Declining balance method (D) Sum of the years digit method

Last Answer : (B) Sinking fund method

Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Description : Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Last Answer : Answer: Option D

Modulus of elasticity of concrete is increased with (a) Higher W/C ratio (b) Shorter curing period (c) Lesser vibration (d) Increase in age

Description : Modulus of elasticity of concrete is increased with (a) Higher W/C ratio (b) Shorter curing period (c) Lesser vibration (d) Increase in age

Last Answer : (d) Increase in age

During monsoon, the rice crop of eastern states of India shows lesser yield due to limiting factor of (a) CO2 (b) light (c) temperature (d) water.

Description : During monsoon, the rice crop of eastern states of India shows lesser yield due to limiting factor of (a) CO2 (b) light (c) temperature (d) water.

Last Answer : (b) light

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Description : Which of the following conditions is to be satisfied both in elastic and plastic analyses? (a) Equilibrium condition (b) Yield condition (c ) Plastic moment condition (d) Mechanism condition

Last Answer : (a) Equilibrium condition

When adsorption hysteresis is observed, the desorption equilibrium pressure is __________ that obtained by adsorption. (A) Always lower than (B) Always higher than (C) Same as (D) Dependent on the system; can be either lower or higher than

Description : When adsorption hysteresis is observed, the desorption equilibrium pressure is __________ that obtained by adsorption. (A) Always lower than (B) Always higher than (C) Same as (D) Dependent on the system; can be either lower or higher than

Last Answer : (A) Always lower than

Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such cases, the desorption equilibrium pressure is __________ that obtained for adsorption. (A) Lower than (B) Higher than (C) Same as (D) Either same or higher than

Description : Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such ... (B) Higher than (C) Same as (D) Either same or higher than

Last Answer : (A) Lower than

Geographic Information Systems can assist the location decision by a. ion by a. automating cen ating center of gr ter of gravity pro avity problems b. computerizing factor rating analysis computerizing factor rating analysis c. combining geography with demographic analysis d. updating updating transportation transportation method solutions e. giving good Internet Internet placement placement for virtual virtual storefronts

Description : Geographic Information Systems can assist the location decision by a. ion by a. automating cen ating center of gr ter of gravity pro avity problems b. computerizing factor ... transportation method solutions e. giving good Internet Internet placement placement for virtual virtual storefronts

Last Answer : c. combining geography with demographic analysis

When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always, (a) Lesser (b) Greater (c) Equal (d) Either lesser or equal

Description : When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always, (a) Lesser (b) Greater (c) Equal (d) Either lesser or equal

Last Answer : (b) Greater

While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Description : While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Last Answer : [ B ] Lesser

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

Transplanter using soil bearing seedlings are more popular than washed root seedling transplanter because of a) less labour requirement b) lesser plant missing percentage c) higher work rates d) all of the above

Description : Transplanter using soil bearing seedlings are more popular than washed root seedling transplanter because of a) less labour requirement b) lesser plant missing percentage c) higher work rates d) all of the above

Last Answer : d) all of the above

What is the main advantage of transplantation method in rice cultivation? (a) This method ensures maximum utilization of land (b) It is helpful in achieving an economical use of water and a higher yield of grain (c) It helps in early harvesting (d) The draining of water from the field before harvesting is made easy

Description : What is the main advantage of transplantation method in rice cultivation? (a) This method ensures maximum utilization of land (b) It is helpful in achieving an economical use of water and a higher ... helps in early harvesting (d) The draining of water from the field before harvesting is made easy

Last Answer : Ans: (b)

For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Description : For a catchment area of 120 km², the equilibrium discharge in m3/hour of a Scurve obtained by the summation of 6 hour unit hydro graph is (A) 0.2 × 106 (B) 0.6 × 106 (C) 2.4 × 106 (D) 7.2 × 10

Last Answer : Answer: Option A

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Last Answer : (B) Each force must be zero

Higher yield may be expected from (A) Gravity springs (B) Surface springs (C) Artesian springs (D) All the above

Description : Higher yield may be expected from (A) Gravity springs (B) Surface springs (C) Artesian springs (D) All the above

Last Answer : (C) Artesian springs

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

The virtual work method is based on the principle [ A ] External work done = Internal work done. [ B ] External work done + Internal work done. [ C ] External work done - Internal work done. [ D ] None of the above.

Description : The virtual work method is based on the principle [ A ] External work done = Internal work done. [ B ] External work done + Internal work done. [ C ] External work done - Internal work done. [ D ] None of the above.

Last Answer : [ A ] External work done = Internal work done.

`alpha`-rays have ionization power because they possess a. Lesser kinetic energy b. Higher kinetic energy c. Lesser penetration power d. Higher penetr

Description : `alpha`-rays have ionization power because they possess a. Lesser kinetic energy b. Higher kinetic energy c. Lesser penetration power d. Higher penetr

Last Answer : `alpha`-rays have ionization power because they possess a. Lesser kinetic energy b. Higher ... . lesser penetration power D. higher penetration power

In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Description : In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Last Answer : (B) Gas phase resistance controlled

Higher the number of stars, ________ will be the efficiency or EER a) Lesser c) Greater b) Likewise e) average

Description : Higher the number of stars, ________ will be the efficiency or EER a) Lesser c) Greater b) Likewise e) average

Last Answer : Greater

Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Description : Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Last Answer : Higher the number of stars, greater will be the efficiency

Higher the number stars, EER or efficiency will be. A. Greater C. Lesser B. Moderate D. None of the above

Description : Higher the number stars, EER or efficiency will be. A. Greater C. Lesser B. Moderate D. None of the above

Last Answer : Greater

The compression ratios for axial flow compressors are ____. a) Lesser b) Higher c) moderate d) None

Description : The compression ratios for axial flow compressors are ____. a) Lesser b) Higher c) moderate d) None 

Last Answer : b) Higher

The discharge temperature of two stage compressor compared to single stage one is ____ a) Lesser b) Same c) Higher d) None

Description : The discharge temperature of two stage compressor compared to single stage one is ____ a) Lesser b) Same c) Higher d) None  

Last Answer : a) Lesser

The specific power consumption of non lubricated compressor compared to lubricated type is ____ a) Lesser b) Same c) Higher d) None

Description : The specific power consumption of non lubricated compressor compared to lubricated type is ____ a) Lesser b) Same c) Higher d) None 

Last Answer : c) Higher

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity of steel (4) Geometry of the section. Which of these statements are correct? (a) 2, 3 and 4 (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Description : Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity ... (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Last Answer : 1,2,4

Pick up the correct statement from the following: (A) Index of wetness = actual rainfall in a year at a place/normal rainfall of that place (B) Normal annual rainfall is obtained by taking the mean of the annual rainfall over a period of 35 years (C) Index of wetness gives an idea of the wetness of the year (D) All the above

Description : Pick up the correct statement from the following: (A) Index of wetness = actual rainfall in a year at a place/normal rainfall of that place (B) Normal annual rainfall is obtained by taking the mean of the ... years (C) Index of wetness gives an idea of the wetness of the year (D) All the above

Last Answer : Answer: Option D

Consider the following statements: (a) Revised simplex method requires lesser computations than the simplex method. (b) Revised simplex method automatically generates the inverse of the current basis matrix. (c) Less number of entries are needed in each table of revised simplex method than usual simplex method. Which of these statements are correct? (A) (a) and (b) only (B) (a) and (c) only (C) (b) and (c) only (D) (a), (b) and (c)

Description : Consider the following statements: (a) Revised simplex method requires lesser computations than the simplex method. (b) Revised simplex method automatically generates the inverse of the current basis matrix. (c) Less number of entries are needed ... c) only (C) (b) and (c) only (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c)

Pick up the correct statement from the following: (A) The volume of underground water extracted by gravity drainage from a saturated soil, is known as yield (B) The ratio of volume drained to the total volume of material drained, is known as specific yield (C) The sum of specific yield and specific retention, is equal to porosity (D) All the above

Description : Pick up the correct statement from the following:  (A) The volume of underground water extracted by gravity drainage from a saturated soil, is  known as yield  (B) The ratio of volume ... ) The sum of specific yield and specific retention, is equal to porosity  (D) All the above

Last Answer : (D) All the above