Which one of the following fill material is more energy efficient for cooling towers in case of sea water cooling? • Splash fill • Film fill • Low clog film fill • None of the above

Which one of the following fill material is more energy efficient for cooling towers in case of sea water cooling?
• Splash fill
• Film fill
• Low clog film fill
• None of the above
by

1 Answer

Answer :

Film fill
by

Related questions

In hyperboloid cooling towers the material is filled at 1. Tower’s bottom 2. Tower’s top 3. Near tower 4. None of above

Description : In hyperboloid cooling towers the material is filled at 1. Tower’s bottom 2. Tower’s top 3. Near tower 4. None of above

Last Answer : Tower’s top

. Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Description : . Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Last Answer : Hyperbolic cooling

Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Description : Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Last Answer : All of the above.

__________ Cooling towers have become the design standard for all natural-draft cooling towers because oftheir structural strength and minimum usage of material. • HCT • CCT • Hyperboloid • None

Description : __________ Cooling towers have become the design standard for all natural-draft cooling towers because oftheir structural strength and minimum usage of material. • HCT • CCT • Hyperboloid • None

Last Answer : Hyperboloid

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Cooling towers operate through a ____process that efficiently cools the already cycled water to be reused. 1. Heat exchange 2. Heat expand 3. Heat transfer 4. None of above

Description : Cooling towers operate through a ____process that efficiently cools the already cycled water to be reused. 1. Heat exchange 2. Heat expand 3. Heat transfer 4. None of above

Last Answer : Heat transfer

Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Description : Common applications of Cooling towers include a. Cooling the circulating water used in oil refineries b. petrochemical and other chemical plants c. thermal power stations d. All of the above.

Last Answer : All of the above.

There are _______main types of cooling towers that are defined by how water or air passes through them. a. One b. Two c. Three d. Four

Description : There are _______main types of cooling towers that are defined by how water or air passes through them. a. One b. Two c. Three d. Four

Last Answer : three

(3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water react with those in soap, leaving an insoluble film. Detergents react less to minerals in water and for all practical purposes are the product of choice for laundry, unless you have very soft water. On the other hand, soap will combine with the magnesium and calcium ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : What is the objective of the 'Kyoto Protocol'? (1) To abolish child labour (2) To eliminate nuclear weapons (3) To increase ground water levels (4) To reduce greenhouse gases

(3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water react with those in soap, leaving an insoluble film. Detergents react less to minerals in water and for all practical purposes are the product of choice for laundry, unless you have very soft water. On the other hand, soap will combine with the magnesium and calcium ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : Cement is usually a mixture of – (1) Calcium silicate and calcium alurninate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

How many times chlorination must be carried out for cooling towers 1. Twice a year 2. Once a year 3. Thrice a year 4. None of above

Description : How many times chlorination must be carried out for cooling towers 1. Twice a year 2. Once a year 3. Thrice a year 4. None of above

Last Answer : Twice a year

How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and humid inside air c) Due to the given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Description : How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and ... given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Last Answer : Natural pressure head density between cold outside air and humid inside air

Thermal efficiencies up to........have been observed in hybrid cooling towers a. 92 b. 82 c. 72 d. 62

Description : Thermal efficiencies up to........have been observed in hybrid cooling towers a. 92 b. 82 c. 72 d. 62

Last Answer : 92

. _____ type of cooling towers are used with nuclear power plants. a. Cross flow b. Natural draft c. Hyperbolic d. None of above

Description : . _____ type of cooling towers are used with nuclear power plants. a. Cross flow b. Natural draft c. Hyperbolic d. None of above

Last Answer : Hyperbolic

Hyperbolic cooling towers are also referred as a. Natural draft towers b. Cross flow towers c. Hyperboloid towers d. None of the above

Description : Hyperbolic cooling towers are also referred as a. Natural draft towers b. Cross flow towers c. Hyperboloid towers d. None of the above

Last Answer : Hyperboloid towers

Which type of cooling towers operate through a chimney or stack ___ a. Cross flow b. Counter flow c. Hyperbolic d. All of above

Description : Which type of cooling towers operate through a chimney or stack ___ a. Cross flow b. Counter flow c. Hyperbolic d. All of above

Last Answer : Hyperbolic

. ______ type of cooling towers are structurally strong. a. Counter flow towers b. Hyperbolic towers c. Cross flow towers d. None of the above

Description : . ______ type of cooling towers are structurally strong. a. Counter flow towers b. Hyperbolic towers c. Cross flow towers d. None of the above

Last Answer : Hyperbolic towers

The hyperboloid cooling towers are often associated __ a. with nuclear power plants b. Used in some coal-fired plants c. In some large chemical and other industrial plants. d. All of the above.

Description : The hyperboloid cooling towers are often associated __ a. with nuclear power plants b. Used in some coal-fired plants c. In some large chemical and other industrial plants. d. All of the above.

Last Answer : All of the above

Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Description : Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Last Answer : Power stations

The hyperbolic cooling towers are associated with ……. and …….. power plants. a) electrical, thermal c) thermal, nuclear b) nuclear, electrical d) none of above

Description : The hyperbolic cooling towers are associated with ……. and …….. power plants. a) electrical, thermal c) thermal, nuclear b) nuclear, electrical d) none of above

Last Answer : thermal, nuclear

Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Description : Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Last Answer : concrete

How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and humid inside air c) Due to the given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Description : How does the flow of air occur in natural draught cooling towers? a) Natural pressure head density between cold outside air and humid inside air b) Variation in pressure of both cold outside air and ... given air vents and vacuum ports d) Because of difference in the volume of both the of airs

Last Answer : Natural pressure head density between cold outside air and humid inside air

. Most cooling towers are capacity rated at a "standard" wet bulb temperature of ___of • 72°F • 52°F • 78°F • 75°F

Description : . Most cooling towers are capacity rated at a "standard" wet bulb temperature of ___of • 72°F • 52°F • 78°F • 75°F

Last Answer : 78°F

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : 200&100

There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Description : There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Last Answer : 4&5

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : a. 200&100

. There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Description : . There are two huge cooling towers close to building site of reactor __ and __ of the Chernobyl Power Plant. a. 1&3 b. 4&5 c. 2&5 d. 1&4

Last Answer : b. 4&5

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

In case of cooling towers, the ratio of the rates of heat and mass transfer is indicated by the __________ number. (A) Lewis (B) Grashoff (C) Sherwood

Description : In case of cooling towers, the ratio of the rates of heat and mass transfer is indicated by the __________ number. (A) Lewis (B) Grashoff (C) Sherwood

Last Answer : (A) Lewis

The __________ that are present depend on cooling tower building material, as well. Cooling towers are built of concrete, wood, plastic or metal. a. Heat b. Pollutants c. Cold d. All of Above

Description : The __________ that are present depend on cooling tower building material, as well. Cooling towers are built of concrete, wood, plastic or metal. a. Heat b. Pollutants c. Cold d. All of Above

Last Answer : b. Pollutants

Hyperboloid cooling towers have become the design standard for all _______draft cooling towers because of their structural strength and minimum usage of material. a. Natural b. Induce c. Force d. None

Description : Hyperboloid cooling towers have become the design standard for all _______draft cooling towers because of their structural strength and minimum usage of material. a. Natural b. Induce c. Force d. None

Last Answer : a. Natural

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Natural Draft or Hyperbolic towers have been used for • Large Capacity of water • Small Capacity of Water • High Efficiency • Low capital cost

Description : Natural Draft or Hyperbolic towers have been used for • Large Capacity of water • Small Capacity of Water • High Efficiency • Low capital cost

Last Answer : Large Capacity of water

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Water entrained by circulating air in cooling towers is termed as (A) Drift (B) Blow down (C) Vapor load (D) None of these

Description : Water entrained by circulating air in cooling towers is termed as (A) Drift (B) Blow down (C) Vapor load (D) None of these

Last Answer : (A) Drift

What Are The Factors That Affect The Rate Of Evaporation Of Water In Cooling Towers?

Description : What Are The Factors That Affect The Rate Of Evaporation Of Water In Cooling Towers?

Last Answer :  Amount of water surface area exposed.  The time of exposure.  The relative velocity of air passing over the droplets.  The RH of air.  The direction of airflow relative to water.

What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these

Description : What are built to cool down the cooling water in a power plant 1 Towers 2 Cooling pond 3 Air filter 4 non of these

Last Answer : 1 Towers

Cooling towers are rated in terms of A. approach B. range C. both of the mentioned D. none of the mentioned

Description : Cooling towers are rated in terms of A. approach B. range C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER :C

Why cooling towers require in the Steam power plant ?

Description : Why cooling towers require in the Steam power plant ?

Last Answer : Cooling towers cool the warm water discharged from the condenser and feed the cooled water back to the condenser. There are two types of cooling methods provided in the cooling towers, they can be either ... finned tubes over which cooling air is passed. Heat is rejected to air as water is cooled

What is the working principle of Cooling Towers?

Description : What is the working principle of Cooling Towers?

Last Answer : The hot water is sprayed from the top of the tower, while the air is made to flow from the bottom of the tower to the top. This air cools the hot water in the cooling tower. Air vaporises ... and leaves at the top of the tower and cooled water leaves at the bottom and recirculated to the condenser.

What is meant by cooling Towers?

Description : What is meant by cooling Towers?

Last Answer : It is a tower or building like device in which atmospheric air circulates in direct or indirect contact with warmer water and water is thereby cooled. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid

Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Description : Air intake for an air compressor should be preferably taken from (A) A site, where cooling towers are located nearby (B) A site, where open coal yard in located nearby (C) An air conditioned room maintained at a temperature of 18°C (D) An outside atmosphere at 10°C

Last Answer : (D) An outside atmosphere at 10°C

How The Dry Type Cooling Towers Are Classified?

Description : How The Dry Type Cooling Towers Are Classified?

Last Answer : The dry type cooling towers are classified into two types ‘as follows: 1. Indirect dry type (or) Heller cooling system 2. Direct dry type-cooling system

How Mechanical Draft Cooling Towers Are Classified?

Description : How Mechanical Draft Cooling Towers Are Classified?

Last Answer : Mechanical draft cooling tower is classified into three types: 1. Forced draft tower. 2. Induced draft counterflow tower. 3. Induced draft cross flow tower.

How The Atmospheric (or) Natural Draught Cooling Towers Are Classified?

Description : How The Atmospheric (or) Natural Draught Cooling Towers Are Classified?

Last Answer : In atmospheric (or) natural cooling towers, the natural air provides the required cooling without the use of fans. This is classified into three types: 1. Natural draft spray filled towers. 2. Natural draft packed type towers. 3. Hyperbolic cooling towers.

Name Different Types Of Cooling Towers?

Description : Name Different Types Of Cooling Towers?

Last Answer : The cooling towers are classified as follows. According to the construction of material: 1. Timber for small tower 2. Ferro concrete for large capacity stations. 3. Multi deck concrete towers for ... air draught: 1. Atmospheric (or) Natural draught cooling system 2. Mechanical draught cooling tower.

What Is The Working Principle Of Cooling Towers?

Description : What Is The Working Principle Of Cooling Towers?

Last Answer : The hot water is sprayed from the top of the tower, while the air is made to flow from the bottom of the tower to the top. This air cools the hot water in the cooling tower. Air evaporates ... and leaves at the top of the tower and cooled water leaves at the bottom and recirculated to the condenser.

What Are The Advantages Of Hyperbolic Natural-draft Cooling Towers?

Description : What Are The Advantages Of Hyperbolic Natural-draft Cooling Towers?

Last Answer :  Since no fans are used power cost and auxiliary equipments cost is reduced.  Hyperbolic tower chimney creates its own draft even when there is no wind.  Ground fogging and warm air re-circulation are avoided in hyperbolic towers.  The structure is more or less self-supported.

Define Forced Draft And Induced Draft Cooling Towers?

Description : Define Forced Draft And Induced Draft Cooling Towers?

Last Answer : If the fan is located at the bottom of the tower and air is blown by the fan up through the descending water it is called as forced draft cooling towers. If the fan is located at the top of the ... on the tower's side and drawn up and discharge through the fan casing, it is called as induced draft.