Pressure of steam in condenser is (A) Atmospheric pressure (B) More than atmospheric pressure (C) Slightly less than atmospheric pressure (D) much less than atmospheric pressure.

Pressure of steam in condenser is
(A) Atmospheric pressure
(B) More than atmospheric pressure
(C) Slightly less than atmospheric pressure
 (D) much less than atmospheric pressure.
by

1 Answer

Answer :

much less than atmospheric pressure.
by

Related questions

The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Description : The delivery pressure of boiler feed water pump compared to the boiler steam pressure is (A) Same (B) Slightly less (C) Slightly more (D) Much more

Last Answer : (C) Slightly more

Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Description : Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Last Answer : Answer : c

What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Description : What is the temperature when water and vapor are in the equilibrium with the atmospheric pressure?  a. Ice point  b. Steam point  c. Critical point  d. Freezing point

Last Answer : Steam point

For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Description : For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Last Answer : Answer : d

An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Description : An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Last Answer : (C) Both (A) and (B)

Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Description : Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Last Answer : (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils

In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The quality of turbine exhaust will decrease (c) The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Description : In a Rankine cycle, with the maximum steam temperature being fixed from metallurgical considerations, as the boiler pressure increases (a) The condenser load will increase [IES-1997] (b) The ... The quality of turbine exhaust will increase (d) The quality of turbine exhaust will remain unchanged

Last Answer : (b) The quality of turbine exhaust will decrease 

In a steam condenser, the partial pressure of steam and air are 0.06 bar and 0.007 bar respectively. The condenser pressure is (A) 0.007 bar (B) 0.053 bar (C) 0.06 bar (D) 0.067 bar

Description : In a steam condenser, the partial pressure of steam and air are 0.06 bar and 0.007 bar respectively. The condenser pressure is (A) 0.007 bar (B) 0.053 bar (C) 0.06 bar (D) 0.067 bar

Last Answer : (D) 0.067 bar

What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Description : What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Last Answer : a) steam

Allowable pressure on high-pressure side or ammonia absorption system is of the order of (a) atmospheric pressure (b) slightly above atmospheric pressure (c) 2-4 bars (d) 5-6 bars

Description : Allowable pressure on high-pressure side or ammonia absorption system is of the order of (a) atmospheric pressure (b) slightly above atmospheric pressure (c) 2-4 bars (d) 5-6 bars

Last Answer : Ans: d

Do you know how to make an atmospheric water generator or atmospheric water condenser?

Description : Do you know how to make an atmospheric water generator or atmospheric water condenser?

Last Answer : First to make a atmospheric water generator you must have a handbook, and safety. To build it takes parts a fan, water, and how to guide you to building it. There are components to it that are very ... with fan, it takes a lot of physics to operate this, be very careful, or watch YouTube Videos.

Do you know what an atmospheric water condenser is?

Description : Do you know what an atmospheric water condenser is?

Last Answer : The Atmospheric Water Condenser, is an appliance which removes water steamy surroundings air. Water steam of the air can be removed by moister chilling the air. So the Atmospheric Water Condenser provides cold fresh air, when it is hot, or cold.

The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat addition is higher for superheat cycle (c) The temperature of steam in the condenser is high (d) The quality of stem in the condenser is low

Description : The efficiency of superheat Rankine cycle is higher than that of simple Rankine cycle because [GATE-2002] (a) The enthalpy of main steam is higher for superheat cycle (b) The mean temperature of heat ... temperature of steam in the condenser is high (d) The quality of stem in the condenser is low 

Last Answer :  (b) The mean temperature of heat addition is higher for superheat cycle  

In most of the vacuum crystalliser, vacuum is generally produced by means of a (A) Suction pump (B) Compressed air jet (C) Steam jet ejector with a barometric condenser (D) None of these

Description : In most of the vacuum crystalliser, vacuum is generally produced by means of a (A) Suction pump (B) Compressed air jet (C) Steam jet ejector with a barometric condenser (D) None of these

Last Answer : (C) Steam jet ejector with a barometric condenser

In a steam engine, the cylinder is connected to the condenser by

Description : In a steam engine, the cylinder is connected to the condenser by

Last Answer : outlet valve.

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Description : Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively. (A) 70 & 30 (B) 30 & 70 (C) 50 & 50 (D) 90 & 10

Last Answer : (A) 70 & 30

A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Description : A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Last Answer : c. Combustion, transfers

How many types of steam condenser are known?

Description : How many types of steam condenser are known?

Last Answer : 1. Jet Condensers - direct contact heat exchanger. 2. Surface Condensers - indirect contact heat exchanger using water. 3. Air Condensers - direct contact heat exchangers using air.

Describe any two sources of air leak in surface condenser. Also describe effect of air leak on latent heat of steam and cooling water requirements.

Description : Describe any two sources of air leak in surface condenser. Also describe effect of air leak on latent heat of steam and cooling water requirements.

Last Answer : ✓ The main sources of air leakage found in condenser are given below: 1) There is leakage of air from atmosphere at the joint of the parts which are internally under a pressure less ... hence evaporation enthalpy of steam increases therefore more amount of cooling water required in the condenser. 

Describe the construction and working of two pass flow surface condenser also write it’s function and location in steam power plant.

Description : Describe the construction and working of two pass flow surface condenser also write it’s function and location in steam power plant.

Last Answer : Construction: It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical perforated type plates ... hot feed water to boiler. Location in steam power plant- between turbine and feed pump 

(i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Description : (i) Draw the neat sketch of bomb calorimeter. (ii) Write any three sources of air leakage in steam condenser.

Last Answer : (i)   (ii) Sources of air leakage in condenser: i) Air leak through joints and packing. ii) Air also comes in condenser with the steam. iii) In jet condensers dissolved air in the cooling water enters the condenser. 

Explain the application of second law of thermodynamics to refrigerator. State any three functions of steam condenser.

Description : Explain the application of second law of thermodynamics to refrigerator. State any three functions of steam condenser. 

Last Answer : According to Clausius s statement heat cannot flow itself from cold body to a hot body without help of external agency REFERIGERATOR is shown in the figure with cold body (T2) and hot body ( ... well from where it is pumped back to the boiler. 3) To remove of air and non-condensable gases

For steam power plant having capacity 600 MW capacity a cooling tower is required to set up with condenser. Suggest the type of condenser and cooling tower with justification.

Description : For steam power plant having capacity 600 MW capacity a cooling tower is required to set up with condenser. Suggest the type of condenser and cooling tower with justification. 

Last Answer : For Steam power plant having Capacity 600 MW the requirement of condenser and cooling tower is as follow. 1) Condenser:- Given Capacity is medium to low capacity for this we can use Jet Condenser ... and efficiency of tower is high  -Temperature of water coming out from tower can be controlled.

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Last Answer : (A) Decreases

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

What Is The Main Function Of A Condenser?

Description : What Is The Main Function Of A Condenser?

Last Answer : In systems involving heat transfer, a condenser is a device or unit used to condense a substance from its gaseous to its liquid state, by cooling it. In so doing, the latent heat is given up by the substance, and will transfer to the condenser coolant.

how Does A Condenser In A Refrigerator Work?

Description : how Does A Condenser In A Refrigerator Work?

Last Answer : In the refrigeration cycle, there are five basic components: fluid refrigerant; a compressor, which controls the flow of refrigerant; the condenser coils (on the outside of the fridge); the evaporator coils (on the inside of the fridge); and something called an expansion device.

What Is An Air Conditioner Condenser?

Description : What Is An Air Conditioner Condenser?

Last Answer : The AC condenser is a very important component found on virtually all modern automotive AC systems. Its primary function is to convert the refrigerant coming from the compressor from a high temperature, high pressure vapor into a high pressure liquid through condensation.

Power saving guide label is stickled on_______ A. Internal parts of AC C. On condenser and compressor B. External cover of AC D. On back cover of AC

Description : Power saving guide label is stickled on_______ A. Internal parts of AC C. On condenser and compressor B. External cover of AC D. On back cover of AC

Last Answer : External cover of AC

Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower

Description : Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower

Last Answer : Spray cooling pond

Which of the following thermodynamic devices operates the reverse of the heat engine?  a. Thermal pump  b. Thermal evaporator  c. Thermal condenser  d. Thermal equilibrant

Description : Which of the following thermodynamic devices operates the reverse of the heat engine?  a. Thermal pump  b. Thermal evaporator  c. Thermal condenser  d. Thermal equilibrant

Last Answer : Thermal pump

The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Description : The primary objective of energy audit is to determine ways to ______ energy consumption per unit of product output. A. Increase. C) Slightly increase. B. Reduce. D) Change.

Last Answer : reduce

The door of a running refrigerator inside a room was left open. Which of the following statements is correct?  (a) The room will be cooled to the temperature inside the refrigerator.  (b) The room will be cooled very slightly.  (c) The room will be gradually warmed up.  (d) The temperature of the air in room will remain unaffected.  (e) any one of above is possible depending on the capacity.

Description : The door of a running refrigerator inside a room was left open. Which of the following statements is correct?  (a) The room will be cooled to the temperature inside the refrigerator.  (b) The room ... air in room will remain unaffected.  (e) any one of above is possible depending on the capacity.

Last Answer : Answer : c

All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Description : All gases during throttling process at atmospheric temperature and pressure show a cooling effect except (A) CO2 (B) H2 (C) O2 (D) N2

Last Answer : (B) H2

Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Description : Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Last Answer : Boiling

The standard reference atmospheric pressure  a. 760 mmHg  b. 1 atm  c. 14.696 psia  d. All of the above

Description : The standard reference atmospheric pressure  a. 760 mmHg  b. 1 atm  c. 14.696 psia  d. All of the above

Last Answer : All of the above

A _______ is used to measure atmospheric pressure.  a. Thermometer  b. Barometer  c. Manometer  d. None of the above

Description : A _______ is used to measure atmospheric pressure.  a. Thermometer  b. Barometer  c. Manometer  d. None of the above

Last Answer : Barometer

While swimming at depth of120m in a fresh water lake, A fish emits an air bubbles of volume 2.0mm³ atmospheric pressure is 100kPa. What is the pressure of the bubble?  a) 217.7 kPa  b) 317.7 kPa  c) 417.7 kPa  d) 517.7 kPa Formula: P= δh

Description : While swimming at depth of120m in a fresh water lake, A fish emits an air bubbles of volume 2.0mm³ atmospheric pressure is 100kPa. What is the pressure of the bubble?  a) 217.7 kPa  b) 317.7 kPa  c) 417.7 kPa  d) 517.7 kPa Formula: P= δh

Last Answer : 217.7 kPa

The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged?  a) 180 in³  b) 170 in³  c) 160 in³  d) 190 in³ Formula: P2V2 = P1V1

Description : The volume of a gas under standard atmospheric pressure & 76 cmHg is 200m³. What is the volume when pressure is 80 cmHg if the temperature is unchanged?  a) 180 in³  b) 170 in³  c) 160 in³  d) 190 in³ Formula: P2V2 = P1V1

Last Answer : 190 in³

A vertical column of water will be supported to what height by standard atmospheric pressure. If the Y w = 62.4lb/ft3 po = 14.7 psi.  a. 44.9 ft  b. 33.9 ft  c. 22.9 ft  d. 55.9 ft formula: ho= po/Yw

Description : A vertical column of water will be supported to what height by standard atmospheric pressure. If the Y w = 62.4lb/ft3 po = 14.7 psi.  a. 44.9 ft  b. 33.9 ft  c. 22.9 ft  d. 55.9 ft formula: ho= po/Yw

Last Answer : 33.9 ft

A vertical column of water will be supported to what height by standard atmospheric pressure.  a. 33.9 ft  b. 45 ft  c. 67 ft  d. 25.46 ft ho= Po/Yo

Description : A vertical column of water will be supported to what height by standard atmospheric pressure.  a. 33.9 ft  b. 45 ft  c. 67 ft  d. 25.46 ft ho= Po/Yo

Last Answer : 33.9 ft

While swimming a depth of 13m in a fresh water lake a fish emits an air bubble of volume 2 mm² atmospheric pressure is 100kpa what is the original pressure of the bubble.  a. 217.17 kpa  b. 119 kpa  c. 326.15 kpa  d. 210 kap Pabs = Pg + Patm

Description : While swimming a depth of 13m in a fresh water lake a fish emits an air bubble of volume 2 mm² atmospheric pressure is 100kpa what is the original pressure of the bubble.  a. 217.17 kpa  b. 119 kpa  c. 326.15 kpa  d. 210 kap Pabs = Pg + Patm

Last Answer : 217.17 kpa

What type of pressure cannot be used for Boyle’s Law?  a. Atmospheric Pressure  b. Gauge Pressure  c. Surface Pressure  d. Isobaric Pressure

Description : What type of pressure cannot be used for Boyle’s Law?  a. Atmospheric Pressure  b. Gauge Pressure  c. Surface Pressure  d. Isobaric Pressure

Last Answer : Gauge Pressure

_________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Description : _________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Last Answer : standard atmospheric pressure

Water boils when:  A. Its saturated vapor pressure equals to the atmospheric pressure  B. Its vapor pressure equals 76cm of mercury  C. Its temperature reaches 212 degree Celsius  D. Its vapor pressure is 1 gram per sq. cm

Description : Water boils when:  A. Its saturated vapor pressure equals to the atmospheric pressure  B. Its vapor pressure equals 76cm of mercury  C. Its temperature reaches 212 degree Celsius  D. Its vapor pressure is 1 gram per sq. cm

Last Answer : Its saturated vapor pressure equals to the atmospheric pressure

Another unit used to measure atmospheric pressure is the “torr”. This is named after the Italian physicist, Evangelista Torrecelli. An average atmospheric pressure is how many torr?

Description : Another unit used to measure atmospheric pressure is the “torr”. This is named after the Italian physicist, Evangelista Torrecelli. An average atmospheric pressure is how many torr?  A. 740  B. 750  C. 760  D. 770

Last Answer : 760

What instrument is used to measure atmospheric pressure?  A. Pitot tube  B. Wind vane  C. Barometer  D. Manometer

Description : What instrument is used to measure atmospheric pressure?  A. Pitot tube  B. Wind vane  C. Barometer  D. Manometer

Last Answer : Barometer