The function of cleats in a roof truss is (A) To support the common rafter (B) To support purlins (C) To prevent the purlins from tilting (D) All of the above

The function of cleats in a roof truss is (A) To support the common rafter (B) To support purlins (C) To prevent the purlins from tilting (D) All of the above
by

1 Answer

Answer :

Option C
by

Related questions

The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Description : The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Last Answer : Answer: Option D

The purlins in roof trusses are placed at the panel points essentially to avoid (a) Axial force in rafter (b) Shear force in rafter (c ) Deflection in rafter (d) Bending moment in rafter

Description : The purlins in roof trusses are placed at the panel points essentially to avoid (a) Axial force in rafter (b) Shear force in rafter (c ) Deflection in rafter (d) Bending moment in rafter

Last Answer : (d) Bending moment in rafter

The horizontal timber piece provided at the apex of a roof truss which supports the common rafter is called (A) Ridge board (B) Hip rafter (C) Eaves board (D) Valley rafte

Description : The horizontal timber piece provided at the apex of a roof truss which supports the common rafter is called (A) Ridge board (B) Hip rafter (C) Eaves board (D) Valley rafte

Last Answer : Answer: Option A

The member which is placed horizontally to support common rafter of a sloping roof, is (A) Purlin (B) Cleat (C) Batten (D) Strut

Description : The member which is placed horizontally to support common rafter of a sloping roof, is (A) Purlin (B) Cleat (C) Batten (D) Strut

Last Answer : Answer: Option A

The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts

Description : The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king post is made by making tenon and mortise respectively (C) Joint between strut and king post, is generally of mortise and tenon type (D) All the abov

Description : Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king ... ) Joint between strut and king post, is generally of mortise and tenon type (D) All the above

Last Answer : Answer: Option D

The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Description : The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Last Answer : Answer: Option B

TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Description : TIES : STRUTS : a.purlins : piers b.angle : tee c.rolle support : hinge d.compression : tension e.107 dynes

Last Answer : d. compression : tension

A projecting piece usually provided to support a truss, is (A) Cornice (B) Coping (C) Frieze (D) Lintel

Description : A projecting piece usually provided to support a truss, is (A) Cornice (B) Coping (C) Frieze (D) Lintel

Last Answer : Answer: Option C

Pick up the item whose weight is added to the weight of respective item, is (A) Cleats (B) Brackets (C) Bolts (D) All the above

Description : Pick up the item whose weight is added to the weight of respective item, is (A) Cleats (B) Brackets (C) Bolts (D) All the above

Last Answer : (D) All the above

The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Description : The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Last Answer : Answer: Option B

Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Description : Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Last Answer : (D) All of the above statements are incorrect

Do I need different track shoes and cleats for different track events?

Description : Do I need different track shoes and cleats for different track events?

Last Answer : Yes, you will need different track shoes and cleats/spikes for different events. The number of spikes, the pattern of spikes and the length of the spikes differs for sprinters, long distance runners and ... the shoes are still different. And throwing shoes do not have spikes and have a smooth sole.

Metal Cleats are Ideal Football Cleats on the Field?

Description : Metal Cleats are Ideal Football Cleats on the Field?

Last Answer : Numerous injuries have occurred on the field from metal football cleats. High school competitions will often ban them from being used on the field. Even though they are designed for the professional players ... the cleats. An error could be quite costly, so preparing ahead of time is essential.

What are football cleats made of?

Description : What are football cleats made of?

Last Answer : Football cleats are made from a hard rubber compound. Older cleats used to be made from metal, however most are now made from hard rubber and are blunt on the ends.

How do I fix my baseball cleats?

Description : How do I fix my baseball cleats?

Last Answer : A good idea would be looking into some more durable cleats. You could also check local stores like Wal-Mart and Academy for replacements spikes, depending on your cleats.

What are the price range for baseball cleats?

Description : What are the price range for baseball cleats?

Last Answer : Cleats can range from $20 to over $100, depending on the age of the person, their shoe size, and the sport in which they will use the shoes. Go to a sporting goods store and research pricing and type. http://www.sportsauthority.com/category/index.jsp?categoryId=763941

A truss containing j joints and m members, will be a simple truss if (A) m = 2j - 3 (B) j = 2m - 3 (C) m = 3j - 2 (D) j = 3m - 2

Description : A truss containing j joints and m members, will be a simple truss if  (A) m = 2j - 3  (B) j = 2m - 3  (C) m = 3j - 2  (D) j = 3m - 2 

Last Answer : (A) m = 2j - 3 

m1 and m2 are the members of two individual simple trusses of a compound truss. The compound truss will be rigid and determinate if (A) m = m1 + m2 (B) m = m1 + m2 + 1 (C) m = m1 + m2 + 2 (D) m = m1 + m2 + 3

Description : m1 and m2 are the members of two individual simple trusses of a compound truss. The compound  truss will be rigid and determinate if  (A) m = m1 + m2 (B) m = m1 + m2 + 1  (C) m = m1 + m2 + 2  (D) m = m1 + m2 + 3

Last Answer : (D) m = m1 + m2 + 3

A compound truss may be formed by connecting two simple rigid frames, by (A) Two bars (B) Three bars (C) Three parallel bars (D) Three bars intersecting at a point

Description : A compound truss may be formed by connecting two simple rigid frames, by  (A) Two bars  (B) Three bars  (C) Three parallel bars  (D) Three bars intersecting at a point 

Last Answer : (B) Three bars 

When a load crosses a through type Pratt truss in the direction left to right, the nature of force in any diagonal member in the left half of the span would (A) Change from compression to tension (B) Change from tension to compression (C) Always be compression (D) Always be tension

Description : When a load crosses a through type Pratt truss in the direction left to right, the nature of force in any diagonal member in the left half of the span would (A) Change from compression to tension (B) Change from tension to compression (C) Always be compression (D) Always be tension

Last Answer : (A) Change from compression to tension

D' Alembert's principle is used for (A) Reducing the problem of kinetics to equivalent statics problem (B) Determining stresses in the truss (C) Stability of floating bodies (D) Designing safe structures

Description : D' Alembert's principle is used for  (A) Reducing the problem of kinetics to equivalent statics problem  (B) Determining stresses in the truss  (C) Stability of floating bodies  (D) Designing safe structures 

Last Answer : (A) Reducing the problem of kinetics to equivalent statics problem

Influence lines are drawn for structures (A) Of any type (B) Statically determinate (C) Pin-jointed truss (D) None of these

Description : Influence lines are drawn for structures  (A) Of any type  (B) Statically determinate  (C) Pin-jointed truss  (D) None of these 

Last Answer : (A) Of any type 

When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called (A) Grid frame (B) Plane frame (C) Space frame (D) Truss frame

Description : When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called (A) Grid frame (B) Plane frame (C) Space frame (D) Truss frame

Last Answer : (C) Space frame

You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is (A) Mansard truss (B) Queen post truss (C) King post truss (D) Collar truss

Description : You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is (A) Mansard truss (B) Queen post truss (C) King post truss (D) Collar truss

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) In king post truss, one vertical post is used (B) In a queen post truss, one vertical post is used (C) In a queen post truss, two vertical posts are used (D) None of thes

Description : Pick up the incorrect statement from the following: (A) In king post truss, one vertical post is used (B) In a queen post truss, one vertical post is used (C) In a queen post truss, two vertical posts are used (D) None of thes

Last Answer : Answer: Option B

Top chord of a truss is continuous over joints l apart. Effective lengths of the member in the plane perpendicular to the truss is (a) 0.7 l (b) 0.85 l (c ) l (d) 1.5 l

Description : Top chord of a truss is continuous over joints l apart. Effective lengths of the member in the plane perpendicular to the truss is (a) 0.7 l (b) 0.85 l (c ) l (d) 1.5 l

Last Answer : (c ) l

A protective or decorative non-structural element placed at the level of the truss supports and column head is called (a) Eaves girder (b) Baluster (c ) Eaves board (d) Tie girder

Description : A protective or decorative non-structural element placed at the level of the truss supports and column head is called (a) Eaves girder (b) Baluster (c ) Eaves board (d) Tie girder

Last Answer : (c ) Eaves board

Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Description : Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Last Answer : C. Pan/tilt device

Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Description : Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Last Answer : d. tilting

Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Description : Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Last Answer : b.topreventsky-wave andupper rayinterference

The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Description : The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Last Answer : E. All of the above

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

Cracks in return walls/ wing walls or Slight tilting/ bulging of abutments are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Description : Cracks in return walls/ wing walls or Slight tilting/ bulging of abutments are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Last Answer : b) Group II*

Tilting of rails is done at a slope of a. 1 in 30 b. 1 in 25 c. 1 in 20* d. 1 in 15

Description : Tilting of rails is done at a slope of a. 1 in 30 b. 1 in 25 c. 1 in 20* d. 1 in 15

Last Answer : c. 1 in 20*

In truss analysis, the reactions can be found by using the equation . a.R=KQ+F b.R=KQ-F c.R=K+QF d.R=K-QF

Description : In truss analysis, the reactions can be found by using the equation . a.R=KQ+F b.R=KQ-F c.R=K+QF d.R=K-QF

Last Answer : b.R=KQ-F

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element

The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Last Answer : d.axial direction

The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Description : The truss element can resist only a.surface force b.axial force c.point load d.none of the above

Last Answer : b.axial force

For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar

Description : For truss analysis, which type of elements is used? a.Triangle b.Parallelogram c.Rectangle d.Bar

Last Answer : d.Bar

A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Last Answer : c. is a two-force body

Guitar,Yamaha truss rod adjustment

Description : Guitar,Yamaha truss rod adjustment

Last Answer : Need Answer

In the given truss bridge parallelogram ABCD and PQRS are congruent if AB 24 feet what is PQ?

Description : In the given truss bridge parallelogram ABCD and PQRS are congruent if AB 24 feet what is PQ?

Last Answer : In the given truss bridge parallelogram ABCD and PQRS are congruent if AB 24 feet what is PQ?

What kind of materials to make a truss bridge?

Description : What kind of materials to make a truss bridge?

Last Answer : What is the answer ?

In the given truss bridge parallelogram ABCD and PQRS are congruent if AB 24 feet what is PQ?

Description : In the given truss bridge parallelogram ABCD and PQRS are congruent if AB 24 feet what is PQ?

Last Answer : In the given truss bridge parallelogram ABCD and PQRS are congruent if AB 24 feet what is PQ?

What are the uses of a triangle in a truss?

Description : What are the uses of a triangle in a truss?

Last Answer : There are many similarities of stage trusses, but which one is the most stable?The most stable and stable structure of a stage truss is a triangular truss. In physics, a triangle is the most stable ... is a perfect truss in all aspects of the truss.SHIZHAN Group is China's largest company group of

What commodity is traditionally measured in units called a Truss?

Description : What commodity is traditionally measured in units called a Truss?

Last Answer : Hay/Straw

How To Truss A Chicken ?

Description : How To Truss A Chicken ?

Last Answer : How To Truss A Chicken Just hearing the phrase truss the chicken is enough to make even the most serious of chefs break into a smile. It does sound funny, but it is necessary to truss a ... cooked their chicken this way, you may want to continue the tradition of trussing the chicken for the oven.

Explain the plate load test with sketch of reaction truss method.

Description : Explain the plate load test with sketch of reaction truss method.

Last Answer : i) Plate load test is field test to determine the ultimate bearing capacity of soil and probable settlement under given loading. ii)The test essentially consist in loading a rigid plate, called bearing ... and load intensity and ultimate bearing capacity (qu) of soil is found out.