Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Mechanism or device which enables the TV camera to move in internal and tilting motion.
A. Tilting
B. Scanner
C. Pan/tilt device
D. Panning device
by

1 Answer

Answer :

C. Pan/tilt device
by

Related questions

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Which of the following is not input unit device? A) scanner B) camera C) plotter D) digitizer

Description : Which of the following is not input unit device? A) scanner B) camera C) plotter D) digitizer

Last Answer : Answer : C

Why do people tilt camera to be "artsy"?

Description : Why do people tilt camera to be "artsy"?

Last Answer : I like the effect sometimes. Totally depends on the photo.

A single sideband emission in which the degree of carrier suppression enables the carrier to be reconstituted and to be used for demodulation. A. Reduce carrier single sideband emission B. Half carrier single sideband emission C. Full carrier single sideband emission D. Standard single sideband emission

Description : A single sideband emission in which the degree of carrier suppression enables the carrier to be reconstituted and to be used for demodulation. A. Reduce carrier single sideband emission ... single sideband emission C. Full carrier single sideband emission D. Standard single sideband emission

Last Answer : A. Reduce carrier single sideband emission

___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Description : ___________ is device that measures the internal open circuit voltage of an equivalent noise generator having an impedance of 600Ω and delivering noise power to a 600 Ω load. A. Psophometer B. Barometer C. Reflectometer D. Voltmeter

Last Answer : A. Psophometer

What is the process of cancelling the effect on internal device capacitance in radio transmitters? A. Degaussing B. Neutralization C. Ionization D. Stabilization

Description : What is the process of cancelling the effect on internal device capacitance in radio transmitters? A. Degaussing B. Neutralization C. Ionization D. Stabilization

Last Answer : B. Neutralization

Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Description : Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Last Answer : B. Thermal agitation

Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Description : Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Last Answer : d.Tiling

Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.

Description : Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Which of the following mineral dressing operations is termed as 'comminution'? (A) Panning (B) Spiralling (C) Tabling (D) None of these

Description : Which of the following mineral dressing operations is termed as 'comminution'? (A) Panning (B) Spiralling (C) Tabling (D) None of these

Last Answer : (D) None of these

A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation and Rotation (2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Description : A segment is any object described by GKS commands and data that start with CREATE SEGMENT and Terminates with CLOSE SEGMENT command. What functions can be performed on these segments? (1) Translation ... 2) Panning and Zooming (3) Scaling and Shearing (4) Translation, Rotation, Panning and Zooming

Last Answer : Translation, Rotation, Panning and Zooming

Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Description : Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Last Answer : (A) Mulling

Which of the following assumptions enables the Euler's equation of motion to be integrated? (A) The fluid is incompressible (B) The fluid is non-viscous (C) The continuity equation is satisfied (D) The flow is rotational and incompressible

Description : Which of the following assumptions enables the Euler's equation of motion to be integrated? (A) The fluid is incompressible (B) The fluid is non-viscous (C) The continuity equation is satisfied (D) The flow is rotational and incompressible

Last Answer : (A) The fluid is incompressible

Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Description : Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Last Answer : (D) All of the above statements are incorrect

The function of cleats in a roof truss is (A) To support the common rafter (B) To support purlins (C) To prevent the purlins from tilting (D) All of the above

Description : The function of cleats in a roof truss is (A) To support the common rafter (B) To support purlins (C) To prevent the purlins from tilting (D) All of the above

Last Answer : Option C

Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Description : Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Last Answer : d. tilting

Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Description : Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Last Answer : b.topreventsky-wave andupper rayinterference

The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Description : The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Last Answer : E. All of the above

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

Cracks in return walls/ wing walls or Slight tilting/ bulging of abutments are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Description : Cracks in return walls/ wing walls or Slight tilting/ bulging of abutments are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Last Answer : b) Group II*

Tilting of rails is done at a slope of a. 1 in 30 b. 1 in 25 c. 1 in 20* d. 1 in 15

Description : Tilting of rails is done at a slope of a. 1 in 30 b. 1 in 25 c. 1 in 20* d. 1 in 15

Last Answer : c. 1 in 20*

First law of thermodynamics  (a) enables to determine change in internal energy of the system  (b) does not help to predict whether the system will or not undergo a change  (c) does not enable to determine change in entropy  (d) provides relationship between heat, work and internal energy  (e) all of the above.

Description : First law of thermodynamics  (a) enables to determine change in internal energy of the system  (b) does not help to predict whether the system will or not undergo a change  (c) does not enable ... entropy  (d) provides relationship between heat, work and internal energy  (e) all of the above.

Last Answer : Answer : e

You are given a set of scales and 12 marbles. The scales are of the old balance variety. That is, a small dish hangs from each end of a rod that is balanced in the middle. The device enables you to conclude either that the contents of the dishes weight the same or that the dish that falls lower has heavier contents than the other. The 12 marbles appear to be identical. In fact, 11 of them are identical, and one is of a different weight. Your task is to identify the unusual marble and discard it. You are allowed to use the scales three times if you wish, but no more. Note that the unusual marble may be heavier or lighter than the others. You are asked to both identify it and determine whether it is heavy or light -Riddles

Description : You are given a set of scales and 12 marbles. The scales are of the old balance variety. That is, a small dish hangs from each end of a rod that is balanced in the middle. The device enables ... than the others. You are asked to both identify it and determine whether it is heavy or light -Riddles

Last Answer : Most people seem to think that the thing to do is weight six coins against six coins, but if you think about it, this would yield you no information concerning the whereabouts of the only different coin. ... . The heavier one is the different coin. If they balance, then 2 is a different light coin.

It is the set of programs that enables your computers hardware device and application software to work together. A. Operating system B. Helper software C. System software D. Application software

Description : It is the set of programs that enables your computers hardware device and application software to work together. A. Operating system B. Helper software C. System software D. Application software

Last Answer : C. System software

___________ is the set of practices that enables organizations to communicate and engage interactively with their audiences through any mobile device or network. 1. Mobile marketing 2. Social web marketing 3. Internet marketing 4. Social media marketing

Description : ___________ is the set of practices that enables organizations to communicate and engage interactively with their audiences through any mobile device or network. 1. Mobile marketing 2. Social web marketing 3. Internet marketing 4. Social media marketing

Last Answer : Mobile marketing

which device prevents the oscillation of the moving system and enables the latter to reach its final position quickly?

Last Answer : A damping device prevents the oscillation of the moving system and enables the latter to reach its final position quickly.

Input device used to make a digital copy of a photograph. (a) Graphics Tablet (b) Scanner (c) MICR (d) OMR -Technology

Description : Input device used to make a digital copy of a photograph. (a) Graphics Tablet (b) Scanner (c) MICR (d) OMR -Technology

Last Answer : (b) Scanner is an input device that is used to make a digital copy of a photograph. It converts the image or text into a digital file.

Scanner is a device that allows a user to convert an image into a ……… file. -Technology

Description : Scanner is a device that allows a user to convert an image into a ……… file. -Technology

Last Answer : Scanner is a device that allows a user to convert an image into a digital file.

What is the device category of a scanner?

Description : What is the device category of a scanner?

Last Answer : What is the answer ?

Which of the following is not an output device? A) Scanner B) Printer C) Flat Screen D) Touch Screen

Description : Which of the following is not an output device? A) Scanner B) Printer C) Flat Screen D) Touch Screen

Last Answer : Answer : D

Which of the following is input device? A) scanner B) speaker C) monitor D) projector

Description : Which of the following is input device? A) scanner B) speaker C) monitor D) projector

Last Answer : Answer : A

Which is considered a direct entry input device? A) Optical scanner B) Mouse and digitizer C) Light pen D) All of the above

Description : Which is considered a direct entry input device? A) Optical scanner B) Mouse and digitizer C) Light pen D) All of the above

Last Answer : Answer : D

Which of the following device is used to enter the text and numerical data in a computer? A. Plotter B. Scanner C. Printer D. Keyboard

Description : Which of the following device is used to enter the text and numerical data in a computer? A. Plotter B. Scanner C. Printer D. Keyboard

Last Answer : D. Keyboard

Which of these is a pointing and drop device? A. Scanner B. Printer C. Keyboard D. Mouse

Description : Which of these is a pointing and drop device? A. Scanner B. Printer C. Keyboard D. Mouse

Last Answer : D. Mouse

Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Description : Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Last Answer : All of the above

Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Description : Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Last Answer : All of the above

If some information is available on paper but you want to transferred it to the hard disc of the computer for further manipulation, which device you will use: a) Photoshop b) Scanner c) Printer d) None of These

Description : If some information is available on paper but you want to transferred it to the hard disc of the computer for further manipulation, which device you will use: a) Photoshop b) Scanner c) Printer d) None of These

Last Answer : b) Scanner

If you want to upload your profile pic into Facebook, the device you will use: a) Printer b) Scanner c) Mouse d) None of These

Description : If you want to upload your profile pic into Facebook, the device you will use: a) Printer b) Scanner c) Mouse d) None of These

Last Answer : b) Scanner

Which is considered a direct entry device: a) Optical Scanner b) Light Penc) Digitizerd) All of The Abovee) None of The Above

Description : Which is considered a direct entry device: a) Optical Scanner b) Light Pen c) Digitizer d) All of The Above e) None of The Above

Last Answer : d) All of The Above

18. Which of these is a point and draw device? a) Mouse b) Scanner c) Printerd) CD-ROM e) None of these

Description : 18. Which of these is a point and draw device? a) Mouse b) Scanner c) Printer d) CD-ROM e) None of these

Last Answer : a) Mouse

If a new device is attached to a computer,such as a printer or scanner, its....... must be installed before the device can be used. 1) Buffer 2) Driver 3) Pager 4) Server

Description : If a new device is attached to a computer,such as a printer or scanner, its....... must be installed before the device can be used. 1) Buffer 2) Driver 3) Pager 4) Server

Last Answer : 2) Driver

Which of the following is not an output device ? 1) Scanner 2) Printer 3) Flat Screen 4) Touch Screen

Description : Which of the following is not an output device ? 1) Scanner 2) Printer 3) Flat Screen 4) Touch Screen

Last Answer : 1) Scanner

Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Description : Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Last Answer : d. All of the above

This is NOT a peripheral device A. Printer B. Scanner C. Anti-Virus D. Mouse

Description : This is NOT a peripheral device A. Printer B. Scanner C. Anti-Virus D. Mouse

Last Answer : B. Scanner

Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Description : Which is considered a direct entry input device? a. Optical scanner b. Mouse and digitizer c. Light pen d. All of the above

Last Answer : d. All of the above

An electronic device that produces sounds from instructions in a mini file is a (1) synthesizer (2) scanner (3) speaker (4) sampler

Description : An electronic device that produces sounds from instructions in a mini file is a (1) synthesizer (2) scanner (3) speaker (4) sampler

Last Answer : synthesizer

Scanner is ____ device.

Description : Scanner is ____ device.  a) Input b) Output c) Both (a) and (b) d) None of the above

Last Answer : Scanner is Input device.

What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Description : What is the basic technique used to stabilize a satellite? A. Gravity-forward motion balance B. Spin C. Thruster control D. Solar panel orientation 62. The jet thrusters are usually

Last Answer : B. Spin

Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Description : Referred by radio regulation as the station in the mobile service not intended to be used while in motion. A. Fixed station B. Base station C. Land station D. Coast station

Last Answer : C. Land station