Cast iron contains carbon approximately (A) 1.5% to 5.5% (B) 0.05% to 1.75% (C) 0.250 % (D) None to these

Cast iron contains carbon approximately
(A) 1.5% to 5.5%
(B) 0.05% to 1.75%
(C) 0.250 %
(D) None to these
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Last Answer : Answer: Option B

Wrought iron contains carbon about (A) 1.5% to 5.5% (B) 0.5% to 1.75% (C) 0.1% to 0.25% (D) None to these

Description : Wrought iron contains carbon about (A) 1.5% to 5.5% (B) 0.5% to 1.75% (C) 0.1% to 0.25% (D) None to these

Last Answer : Answer: Option C

The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%

Description : The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%

Last Answer : B. 0.15%

Mass percentage of carbon in CO2 is approximately: w) 37.5% x) 27.3% y) 75% z) 45%

Description : Mass percentage of carbon in CO2 is approximately: w) 37.5% x) 27.3% y) 75% z) 45%

Last Answer : ANSWER: X -- 27.3%

Payment of commission on PPF and SCSS is a) 1% and 0.5% d) 2% and .05% c) 0.5% and Nil d) No commission paid

Description : Payment of commission on PPF and SCSS is a) 1% and 0.5% d) 2% and .05% c) 0.5% and Nil d) No commission paid

Last Answer : d) No commission paid

In the acid Bessemer process, the hot metal should have the following composition. (A) S < 0.05% and P < 0.05% (B) S < 0.05% and P < 1.5% (C) S < 0.05% and P > 1.5% (D) S > 1.5% and P < 0.05%

Description : In the acid Bessemer process, the hot metal should have the following composition. (A) S < 0.05% and P < 0.05% (B) S < 0.05% and P < 1.5% (C) S < 0.05% and P > 1.5% (D) S > 1.5% and P < 0.05%

Last Answer : (A) S < 0.05% and P < 0.05%

Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Description : Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Last Answer : ANSWER: D

Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % 20 D. 0.03%

Description : Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % 20 D. 0.03%

Last Answer : ANSWER: D

Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Description : Air contains volume of carbon dioxide approximately _____. A. 3 % B. 33% C. 0.3 % D. 0.03%

Last Answer : ANSWER: D

Wrought iron contains carbon upto (A) 0.25 % (B) 1.0 % (C) 1.5 % (D) 2 %

Description : Wrought iron contains carbon upto (A) 0.25 % (B) 1.0 % (C) 1.5 % (D) 2 %

Last Answer : Answer: Option A

Carbon content in the cast iron is (A) 2.5 – 4.5 % (B) 0 – 0.25 % (C) 0.25 – 0.50 % (D) 0.50 – 1.5 %

Description : Carbon content in the cast iron is (A) 2.5 – 4.5 % (B) 0 – 0.25 % (C) 0.25 – 0.50 % (D) 0.50 – 1.5 %

Last Answer : (B) 0 – 0.25 %

A drug (200 mg dose) administered in tablet form and as intravenous injection (50 mg dose) showed AUG of 100 and 200 microgram hr/mL, respectively. The absolute availability of the drug through oral administration is : (A) 125% (B) 250 % (C) 12.5% (D) 1.25%

Description : A drug (200 mg dose) administered in tablet form and as intravenous injection (50 mg dose) showed AUG of 100 and 200 microgram hr/mL, respectively. The absolute availability of the drug through oral administration is : (A) 125% (B) 250 % (C) 12.5% (D) 1.25%

Last Answer : (C) 12.5%

Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes

Last Answer : (B) Wrought iron cannot be easily forged and welded

The percentage of reinforcement in slabs is generally in the range of [ A ] 0.3% to 0.5% [ B ] 0.5% to 1.0% [ C ] 1.0% to 1.5% [ D ] 1.5 % to 2.0%

Description : The percentage of reinforcement in slabs is generally in the range of [ A ] 0.3% to 0.5% [ B ] 0.5% to 1.0% [ C ] 1.0% to 1.5% [ D ] 1.5 % to 2.0%

Last Answer : [ A ] 0.3% to 0.5%

According to IS : 456-2000, clause 39.4, stirrups should be provided for a shear of [ A ] at least 75% [ B ] at least 50% [ C ] at least 25 % [ D ] none of the above.

Description : According to IS : 456-2000, clause 39.4, stirrups should be provided for a shear of [ A ] at least 75% [ B ] at least 50% [ C ] at least 25 % [ D ] none of the above.

Last Answer : [ B ] at least 50%

Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Description : Cast iron contains __________ percent carbon. (A) 2.5 (B) 3.75 (C) 4.75 (D) 5.25

Last Answer : Option A

he minimal alveolar concentration (MAC) of halothane is: A. 75% B. 25% C. 7.5% D. 0.75%

Description : he minimal alveolar concentration (MAC) of halothane is: A. 75% B. 25% C. 7.5% D. 0.75%

Last Answer : D. 0.75%

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon ? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : Cast iron

What percentage of the atmosphere consists of carbon dioxide? Is it approximately: a) .03% (read: three-hundredths of a percent) b) 1% c) 5% d) 7%

Description : What percentage of the atmosphere consists of carbon dioxide? Is it approximately: a) .03% (read: three-hundredths of a percent) b) 1% c) 5% d) 7%

Last Answer : ANSWER: A -- .03%

If the average compressive strength is 4000 kg/cm2 and standard deviation is 500, the co-efficient of variation is (A) 10 % (B) 12.5 % (C) 15 % (D) 18.5%

Description : If the average compressive strength is 4000 kg/cm2 and standard deviation is 500, the co-efficient of variation is (A) 10 % (B) 12.5 % (C) 15 % (D) 18.5%

Last Answer : Answer: Option B

6 gm of carbon is burnt with an amount of air containing 18 gm oxygen. The product contains 16.5 gms CO2 and 2.8 gms CO besides other constituents. What is the degree of conversion on the basis of disappearance of limiting reactant? (A) 100% (B) 95% (C) 75% (D) 20%

Description : 6 gm of carbon is burnt with an amount of air containing 18 gm oxygen. The product contains 16.5 gms CO2 and 2.8 gms CO besides other constituents. What is the degree of conversion on the basis of disappearance of limiting reactant? (A) 100% (B) 95% (C) 75% (D) 20%

Last Answer : (B) 95%

Haemoglobin contains about (A) 30% of the total body iron (B) 50% of the total body iron (C) 75% of the total body iron (D) 90% of the total body iron

Description : Haemoglobin contains about (A) 30% of the total body iron (B) 50% of the total body iron (C) 75% of the total body iron (D) 90% of the total body iron

Last Answer : Answer : C

Cast iron (A) Is obtained by purifying pig iron (B) Is manufactured in required shapes (C) May contain 2 to 5 per cent of carbon with other impurities (D) All the above

Description : Cast iron (A) Is obtained by purifying pig iron (B) Is manufactured in required shapes (C) May contain 2 to 5 per cent of carbon with other impurities (D) All the above

Last Answer : Answer: Option D

The percentage share of electrical power from solar energy in the total electric power generation from all renewable energy sources sought to be achieved by Indian government by the year 2022, is (A) ~ 57.1% (B) ~ 65.5% (C) ~ 47.5% (D) ~ 75%

Description : The percentage share of electrical power from solar energy in the total electric power generation from all renewable energy sources sought to be achieved by Indian government by the year 2022, is (A) ~ 57.1% (B) ~ 65.5% (C) ~ 47.5% (D) ~ 75% 

Last Answer : Answer: A

Rise of water table in cohesion-less soils upto ground surface reduces the net ultimate bearing capacity approximately by (A) 25 % (B) 50 % (C) 75 % (D) 90 %

Description : Rise of water table in cohesion-less soils upto ground surface reduces the net ultimate bearing capacity approximately by (A) 25 % (B) 50 % (C) 75 % (D) 90 %

Last Answer : (B) 50 %

The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Description : The percentage of voids in cement is approximately (A) 25 % (B) 40 % (C) 60 % (D) 80 %

Last Answer : (B) 40

The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Description : The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Last Answer : 0.70 to 0.80%

A transport company is running five buses between two towns, which are 50 kms apart. Seating capacity of each bus is 50 passengers. Actually passengers carried by each bus were 75% of seating capacity. All buses ran on all days of the month. Each bus made one round trip per day. Passenger kms are: (a) 2,81,250 (b) 1,87,500 (c) 5,62,500 (d) None of the above

Description : A transport company is running five buses between two towns, which are 50 kms apart. Seating capacity of each bus is 50 passengers. Actually passengers carried by each bus were 75% of seating capacity. All buses ran on all days of ... (a) 2,81,250 (b) 1,87,500 (c) 5,62,500 (d) None of the above

Last Answer : (c) 5,62,500

Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Last Answer : Answer: Option B

As per revised Govt policy the insurant will get approximately a) Less than 40% of total premia paid by him, if surrendered before completion of 5 years b) 75% after completion of 5 years but before 10 years c) Full recovered amount after 10 year d) All the above

Description : As per revised Govt policy the insurant will get approximately a) Less than 40% of total premia paid by him, if surrendered before completion of 5 years b) 75% after completion of 5 years but before 10 years c) Full recovered amount after 10 year d) All the above

Last Answer : d) All the above

Ethyl alcohol containing 9.5% methyl alcohol and 0.5 % pyridine is called

Description : Ethyl alcohol containing 9.5% methyl alcohol and 0.5 % pyridine is called

Last Answer : Ethyl alcohol containing 9.5% methyl alcohol and 0.5 % pyridine is called A. Spirit B. Denaturated spirit C. Rectified spirit D. Absolute alcohol

62)The no-load current drawn by transformer is usually........percent of the full-load current? A. 0.2 to 0.5 % B. 2 to 5% C. 12 to 15 % D. 20 to 30 %

Description : 62)The no-load current drawn by transformer is usually........percent of the full-load current? A. 0.2 to 0.5 % B. 2 to 5% C. 12 to 15 % D. 20 to 30 %

Last Answer : B) 2 to 5%

A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Description : A 40 kW engine has a mechanical efficiency of 80 %. If the frictional power is assumed to be constant with load, what is the approximate value of the mechanical efficiency at 50 % of the rated load? (a) 45% (b) 55 % (c) 65% (d) 75%

Last Answer : Ans :c

In 2000-2001 the use of mechanical & electrical increased from a)20% to 45%. c) 45% to 75% b) 45 to below 83% d)40% to over 83 %

Description : In 2000-2001 the use of mechanical & electrical increased from a)20% to 45%. c) 45% to 75% b) 45 to below 83% d)40% to over 83 %

Last Answer : 40% to over 83 %

The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower

Description : The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower

Last Answer : Answer: A

On an IQ test consisting of 250 questions, Jasvinder answered 40% of the first 125 questions correctly. What per cent of the other 125 questions does he need to answer correctly for his grade on the entire exam to be 60%? (a) 75% (b) 80% (c) 60% (d) Cannot be determined (e) None of these

Description : On an IQ test consisting of 250 questions, Jasvinder answered 40% of the first 125 questions correctly. What per cent of the other 125 questions does he need to answer correctly for his grade on the entire exam to be 60%? (a) 75% (b) 80% (c) 60% (d) Cannot be determined (e) None of these

Last Answer : (b) 80%

A metal plate weighting 750g is to be electroplated wiwth 0.05% of its weight of silver. If a current of 0.8A is used. Find the time needed for deposi

Description : A metal plate weighting 750g is to be electroplated wiwth 0.05% of its weight of silver. If a current of 0.8A is used. Find the time needed for deposi

Last Answer : A metal plate weighting 750g is to be electroplated wiwth 0.05% of its weight of silver. If a current of 0.8A is ... 37 s C. 4 min 16 s D. 6 min 10 s

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum

How many tablets, each containing 8.75 grains of mercuric chloride will be required to make one quart of 0.05% solution?

Description : How many tablets, each containing 8.75 grains of mercuric chloride will be required to make one quart of 0.05% solution?

Last Answer : 4.375 gr. in 1 fl ounce = 1% w/v solution 4.375 gr X 0.05 = 0.2187 gr required to get 1 fl.oz 0.05% 0.2187 gr x 40 = 8.748 gr≈ 8.75 grain required to get 40 fl.oz 0.05 % 8.75 gr/8.75 gr = 1 tablets Therefore, one tablet is required to prepare one quart of 0.05% solution.

Suppose that from given statistics, it is known that meningitis causes stiff neck 50% of the time, that the proportion of persons having meningitis is 1/50000, and that the proportion of people having stiff neck is 1/20. Then the percentage of people who had meningitis and complain about stiff neck is: (A) 0.01% (B) 0.02% (C) 0.04% (D) 0.05%

Description : Suppose that from given statistics, it is known that meningitis causes stiff neck 50% of the time, that the proportion of persons having meningitis is 1/50000, and that the proportion of people having stiff neck is 1/20. Then ... complain about stiff neck is: (A) 0.01% (B) 0.02% (C) 0.04% (D) 0.05%

Last Answer : Answer: B

The setting expansion of casting investment is approximately A. 0 to 0.1% B. 0.1 to 0.5% C. 0.5 to 1% D. 1.1 to 1.6%

Description : The setting expansion of casting investment is approximately A. 0 to 0.1% B. 0.1 to 0.5% C. 0.5 to 1% D. 1.1 to 1.6%

Last Answer : B. 0.1 to 0.5%

In India approximately 75% of the average rainfall is received by __? a South Monsoon b Eastern Winds c Coastal Monsoon d South East Monsoon e South West Monsoon

Description : In India approximately 75% of the average rainfall is received by __? a South Monsoon b Eastern Winds c Coastal Monsoon d South East Monsoon e South West Monsoon

Last Answer : d South East Monsoon

The un-polymerized monomer in Self-cured resin is approximately:** A. 0.5% B. 2.5% C. 5% D. 10%

Description : The un-polymerized monomer in Self-cured resin is approximately:** A. 0.5% B. 2.5% C. 5% D. 10%

Last Answer : C. 5%

The contraction of gold alloys on solidifying is approximately: A. 0.5% B. 2.5% C. 1.40% D. 3%

Description : The contraction of gold alloys on solidifying is approximately: A. 0.5% B. 2.5% C. 1.40% D. 3%

Last Answer : C. 1.40%

Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Present rate of Senior citizens saving scheme account is____ payable quarterly. a) 10% b) 9.3% c) 8.5 % d) 9.5%

Description : Present rate of Senior citizens saving scheme account is____ payable quarterly. a) 10% b) 9.3% c) 8.5 % d) 9.5%

Last Answer : b) 9.3%