Minimum percentage of longitudinal steel in a column should not be less than
[ A ] 0.60%
[ B ] 0.80%
[ C ] 1.00%
[ D ] 1.20%

1 Answer

Answer :

[ B ] 0.80%

Related questions

Description : Maximum percentage of steel in compression should be [ A ] 0.20% [ B ] 0.40% [ C ] 2.00% [ D ] 4.00%

Last Answer : [ D ] 4.00%

Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four

Description : How much percentage of water lies within the body cells. a. 20% b. 40% c. 60% d. 80%

Last Answer : 40%

Description : Maximum percentage of longitudinal steel in a column should be less than [ A ] 6% [ B ] 8% [ C ] 9% [ D ] 10%

Last Answer : [ B ] 8%

Description : The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Last Answer : Answer: Option D

Description : Pozzolana is essentially a silicious material containing clay up to (a) 20% (b) 40% (c) 60% (d) 80%

Last Answer : (d) 80%

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

Description : Minimum cover to longitudinal steel in a column should be (if the diameter of bar, Ø> 12mm) [ A ] 25 mm [ B ] 30 mm [ C ] 40 mm [ D ] 50 mm

Last Answer : [ C ] 40 mm

Description : Approximately how many businesses content marketing is used? A. 20% to 30% B. 40% to 50% C. 60% to 70% D. 80% to 90%

Last Answer : D. 80% to 90%

Description : In inverter tech AC some manufactures claim up to saving____________. a) 50% c) 60% b) 20% d) 80%

Last Answer : 60%

Description : Higher plant efficiency up to______ over the entire load range. a. 30%-50% b. 20%-40% c. 60%-90% d. 50%-80%

Last Answer : a. 30%-50%

Description : A perfect product (with 100% awareness) starting with a survey score of 100, why is it that at 60% accessibility rating, 80% of customers have access to a product such that survey score declines from ... acquire the product. c. Because accessibility rating is not reliable. d. All of the above.

Last Answer : b. Of the 40% of customers without accessibility, 20% of them would make an extra effort to acquire the product.

Description : The sum of the percentage of tricalcium silicate and dicalcium silicate for Portland cement varies from. (a) 50 to 60% (b) 60 to 70% (c) 70 to 80% (d) 80 to 90%

Last Answer : (c) 70 to 80%

Description : For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

Description : The Minimum percentage of secondary steel in slabs for Fe- 415 grade steel should be __________ of Gross cross-section area [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%

Last Answer : [ A ] 0.12%

Description : In the Freemium model typically what percentage of users pay? A. Almost all users - over 90% B. Most Users - over 60% C. Few Users - less than 20% D. Users do not pay

Last Answer : C. Few Users - less than 20%

Description : The limits of percentage p of the longitudinal reinforcement in a column is given by (A) 0.15% to 2% (B) 0.8% to 4% (C) 0.8% to 6% (D) 0.8% to 8%

Last Answer : Answer: Option C

Description : The percentage of India's total population employed in agriculture is nearly (1) 60% (2) 50% (3) 70% (4) 80%

Last Answer : (1) 60% Explanation: As per the Economic Survey 2013-14, agriculture accounts for about 54.6 percent of total employment (Census 2011) in India. However, it contributed only 13.9 percent to India's GDP in 2013-14 (provisional estimates) and 15.2 percent during the Eleventh Plan.

Description : The cow’s milk contains how much amount of water in terms of percentage? A. 60% B. 65% C. 72% D. 80% (Answer)

Last Answer : D. 80% (Answer)

Description : Seed germination percentage of rough lemon is: a. 50-60% b. 60-70% c. 70-80% d. 80-90%

Last Answer : 60-70%

Description : Germination percentage in sour orange rootstock is: a. 50-60% b. 61-70% c. 71-80% d. 81-90%

Last Answer : 50-60%

Description : What percentage of patients who survived the polio epidemic of the 1950s are now estimated to have developed post-polio syndrome? a) 60-80% Patients who survived the polio epidemic of the 1950s ... 80% of patients who survived the polio epidemic of the 1950s are now experiencing post-polio syndrome.

Last Answer : a) 60-80% Patients who survived the polio epidemic of the 1950s, many now elderly, are developing new symptoms of weakness, fatigue and musculoskeletal pain. It is estimated that between 60% and 80% of the 640,000 polio survivors are experiencing the phenomenon known as post-polio syndrome.

Description : If Ac , Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is (A) cAc + m cAsc (B) c (A - Asc) + m cAsc (C) c [A + (m - 1)ASC] (D) All the above

Last Answer : Answer: Option D

Description : According to IS:456, the diameter of the helices in circular a column shall be at least [ A ] The diameter of longitudinal steel [ B ] One-half the diameter of longitudinal steel [ C ] One-fourth the diameter of longitudinal steel [ D ] Three-fourth the diameter of longitudinal steel

Last Answer : [ C ] One-fourth the diameter of longitudinal steel

Description : The diameter of the Links in column should be at least……….of the largest diameter of the longitudinal steel [ A ] One-half [ B ] Three-fourth [ C ] One eighth [ D ] One – fourth

Last Answer : [ D ] One – fourth

Description : If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km

Last Answer : .8

Description : The minimum diameter of longitudinal bars in a column is (A) 6 mm (B) 8 mm (C) 12 mm (D) 16 mm

Last Answer : Answer: Option C

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

Description : Arjun bought 100 mangoes at the same price . 40 of them were of lower quality. He sold the remaining 60 mangoes at 60% more than the cost price. If in total, he earned a 28% profit, What is his ... loss percentage, on the 40 mangoes of lower quality? a)20% profit b)15% profit c)20% loss d)15% loss

Last Answer : c)20% loss

Description : Of the total incident solar radiation the proportion of PAR is (a) about 70% (b) about 60% (c) less than 50% (d) more than 80%.

Last Answer : (c) less than 50%

Description : The percentage of Sinhala-speakers in Sri Lanka is the Tamil-speakers are percent. a. 74% and 18% b. 75% and 25% c. 59% and 41% d. 80% and 20%

Last Answer : a. 74% and 18%

Description : In a DNA percentage of thymine is 20% then what will be percentage of guanine? (a) 20% (b) 40% (c) 30% (d) 60%

Last Answer : (c) 30%

Description : A trader sold a trouser at 44% profit after announcing two successive discounts of 10% and 20%. At what percentage did he mark the trouser above the cost price? a)60% b)100% c)180% d)175%

Last Answer : b)100%

Description : A person, by selling an article at half of the list price incurs a loss of 20%. Find the profit percentage if he sells at the list price? A. 25% B. 60% C. 5% D. 30 %

Last Answer : Answer – B (60 %) Explanation – 0.50 MP = 0.8 CP (since 20% loss) So, MP = 160CP ⇒ 60% gain.

Description : For ductility consideration, the maximum percentage of steel used should not exceed ------- of the balanced steel [ A ] 25% [ B ] 50% [ C ] 60% [ D ] 75%

Last Answer : [ D ] 75%

Description : The diameter of longitudinal bars of a column should never be less than (A) 6 mm (B) 8 mm (C) 10 mm (D) 12 mm

Last Answer : Answer: Option D

Description : If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 8 mm

Last Answer : Answer: Option B

Description : According to IS: 456 -2000, the spacing of links in a Column should be less than [ A ] 16 x diameter of smallest longitudinal bar [ B ] 24 x diameter of smallest longitudinal bar [ C ] 48 x diameter of smallest longitudinal bar [ D ] 48 x diameter of greatest longitudinal bar

Last Answer : [ A ] 16 x diameter of smallest longitudinal bar

Description : Minimum steel in the main direction of a slab when using high yield steel [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%

Last Answer : [ B ] 0.15%

Description : The minimum diameter of longitudinal steel should be [ A ] 10 mm [ B ] 12 mm [ C ] 16 mm [ D ] 20 mm

Last Answer : [ B ] 12 mm

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Description : Brother's weight is 25 % more than that of sister. What percent is brother’s weight less than sister's weight? a) 25% b) 60% c) 45% d) 20% e) 98% 

Last Answer : Answer: D Let sister's weight be 100 kg. Then brother's weight = (100 + 25) kg = 125 kg If brother's weight is 125 kg, then sister's weight is 100 kg. If brother's weight is 1 kg, then ... then sister's weight = (100/125 100) kg Therefore, sister's weight is 20 % less than that of brother.

Description : to manganese besides other minor elements. a) 0.10 to 0.50% b) 0.20 to 0.60% c) 0.40 to 0.80% d) 0.50 to 0.80%

Last Answer : 0.50 to 0.80%

Description : The steel mainly contains how much percentage of carbon a) 0.70 to 0.80% b) to 0.3 % c) 0.5 to 0.1 %

Last Answer : 0.70 to 0.80%

Description : More than farmers depend upon animal drawn implements. A) 50% B) 60% C) 45% D) 80%

Last Answer : 80%

Description : Of the total body water, intracellular compartment contains about (A) 50% (B) 60% (C) 70% (D) 80%

Last Answer : Answer : C

Description : The starch content of pulses is about (A) 50% (B) 60% (C) 70% (D) 80%

Last Answer : Answer : B

Description : The starch content of wheat is about (A) 50% (B) 60% (C) 70% (D) 80%

Last Answer : Answer : C

Description : How Much of the total area cultivated is under Irrigation System? A. 60% B. 70% C. 80% D. 90%

Last Answer : ANSWER: B

Description : The ratio of Pure gold and 18 carot gold is – (1) 60% (2) 75% (3) 80% (4) 100%

Last Answer : (2) 75% Explanation: 24-karat gold is pure (while 100% purity is unattainable, this designation is permitted in commerce for 99.95% purity), 18- karat gold is 18 parts gold, 6 parts another metal (forming an alloy with 75% gold).