Description : Ultra Low volume (UVL) sprays is less than 5 litre spray/ hector a. 2 liter spray/ hector b. 3 liter spray/ hector
Last Answer : Ans- c. 5 litre spray/ hector
Description : the capacity of ultra-low volume spray a) less than 5 litres/hector b) more than 5 litres/ hector c) 5 to 400 litres/hector d) More than 400 litres/hector
Last Answer : less than 5 litres/hector
Description : Volume of spray fluid in ultra low vol ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha
Last Answer : b).2-5 l/ha
Description : Volume of spray fluid in ultra low vol- ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha
Description : Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above
Last Answer : Ans- c. 35-100mm.
Description : Low volume sprays is a. 10 to 400liter spray/ hector b. 5 to 400liter spray/ hector. c. 15 to 400liter spray/ hector d. None of above
Last Answer : Ans- b. 5 to 400liter spray/ hector
Description : In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above
Last Answer : Ans- a. more time and labour.
Description : High volume spray is more than b. 500liter spray/ hector c. 600liter spray/ hector d. None of above
Last Answer : Ans- a. 400liter spray/ hector
Description : CAN I SPRAY DIAZINON ULTRA INSECT SPRAY ON OKRA IN MY GARDEN AND HOW MANY DAYS DO WE WAIT FOR HARVEST
Last Answer : I don't do chemicals on food products.... instead after the sun goes down mix 1 tsp liquid hand soap & 1 qt water and spray spray and if needed spray again............................rinse well before using....this is safe
Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None
Last Answer : c.High Production
Description : A waste heat recovery unit is an energy recovery heat exchanger that transfers heat from process outputs at ........ a) High temperature b) Medium temperature c) Low temperature d) Both a & b
Last Answer : High temperature
Description : The system is suitable to recover heat from ........ temperature exhaust gases . a) Medium-low b) Medium-high c) High-low d) High
Last Answer : Medium-high
Description : Heat loss can be classified into ....... a) High temperature b) Low temperature c) Medium temperature d) All of the above
Last Answer : All of the above
Description : ________ terms are used to describe supercritical and ultra-supercritical coal generation by the coal industry. (a)High- efficiency and low -emissions (b)Low-efficiency and high- emissions (c) High-efficiency and high- emissions (d)Low-efficiency and low-emissions
Last Answer : (a)High- efficiency and low -emissions
Description : In a low to medium temperature waste heat recovery system which of the device is most suitable a) Economiser b) Heat wheels c) air preheater d) Recuperator
Last Answer : Heat wheels
Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout
Last Answer : b.Process layout
Description : Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a
Last Answer : ans a
Description : A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray
Last Answer : ans d
Description : . Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above
Last Answer : Ans- b. elliptical.
Description : amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liquid
Last Answer : 90 litres liquid
Description : Area that one man can spray in a day is: A. 0.1 ha B. 0.2 ha C. 0.3 ha. D. 9.4 ha
Last Answer : 9.4 ha
Description : nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle
Last Answer : Fan nozzle
Description : Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above
Description : A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework
Last Answer : Handle, beam
Description : Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator
Last Answer : Pressure regulator
Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle
Last Answer : Filter
Description : Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above
Description : Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance
Last Answer : Reversible shovels, curved tynes
Description : Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower
Last Answer : Spray cooling pond
Description : If engine calls for ultra low sulfur diesel fuel, is there damage if you put in higher sulfur diesel?
Last Answer : answer:I don't currently drive a diesel, but I don't believe you can buy low sulfur diesel at fuel stations by highways in the USA. Cold start issues are related to the items below. ... use additives to stop gelling ) 2)moisture in fuel ( separation filters remove and empty accumulated water )
Description : or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.
Last Answer : C. The VMD is larger than the NMD.
Description : What gas thermometer is based on the principle that at low pressure, the temperature of a gas is proportional to its pressure at constant volume? A. Constant-pressure gas thermometer B. Isobaric gas thermometer C. Isometric gas thermometer D. Constant-volume gas thermometer
Last Answer : Constant-volume gas thermometer
Description : A tractor is an engineering vehicle specifically designed to deliver a high torque at speeds A. High C. Slow B. Extreme High D. Medium
Last Answer : Slow
Description : Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller ... (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2
Last Answer : (a) 2 3 1 4
Description : To measure the speed of an approaching car a police officer shines – (1) light waves on it (2) microwaves on it (3) radio waves on it (4) ultra high frequency waves on it
Last Answer : (3) radio waves on it Explanation: Radar, which stands for radio detection and ranging, is a system that uses reflected radio waves to detect objects and measure their distance and speed. For example, police use radar to calculate the speed of cars.
Description : A radio frequency in the ultra high frequency band of the radio spectrum band. A. 235.50 MHz B. 450.50 MHz C. 150.50 GHz D. 0.31250 GHz
Last Answer : D. 0.31250 GHz
Description : Ultra-super critical boiler uses steam with very high temperature up to …… a) 980° b) 620° c) 550° d) 720°
Last Answer : b) 620°
Description : What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz
Last Answer : ANSWER: Y -- 300 to 3,000 MEGA HERTZ
Description : To measure the speed of an approaching car a police officer shines (1) light waves on it (2) microwaves on it (3) radio waves on it (4) ultra high frequency waves on it
Last Answer : radio waves on it
Description : An ideal gas as compared to a real gas at very high pressure occupies (a) more volume (b) less volume (c) same volume (d) unpredictable behaviour (e) no such correlation.
Last Answer : Answer : a
Description : tillage are proper for seeding and planting operations a secondary a) Primary b) Basic c) Medium d) None of these
Last Answer : Primary
Description : A compact utility tractor (CUT) is a version of an agricultural tractor A. Smaller C. Medium B. Larger D. Extreme
Last Answer : . Smaller
Description : Mechanisation in india at various levels can be done in following ways a) by introducing the improved agricultural implements on small scale holding to be operated by bullocks. b) by using small ... tractor and machines on remaining holding to supplement animal power source. d) All of the above
Description : Small label can be found in plants which usually don‘t consume ……….. energy. A) Less. C) More B) Medium. D) None of the above
Last Answer : more
Description : S.S.I certificate is provided to __________ industry. A. Large scale. C. Small scale B. Medium scale. D. All of these
Last Answer : small scale
Description : Nellore to medium temperature waste heat recovery system the most suitable device is ------ a) Economizer b) Heat wheels c) Air preheater d) Recuperate d) Carbonate
Description : Carnot cycle efficiency depends upon (a) properties of the medium/substance used (b) condition of engine (c) working condition (d) temperature range of operation (e) effectiveness of insulating material around the engine.
Last Answer : Answer : d
Description : In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light
Last Answer : (2) infra-red rays Explanation: When electricity is passed through the filament, the filament gets hot. Depending on the temperature of the filament, radiation is emitted from the filament. The ... energy converts into visible light and rest of it is emitted as heat or infrared radiation.
Description : In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light
Last Answer : infra-red rays
Description : 66. The energy used by any manufacturing process varies with a) Production volume b) Type of process c) Resource input d) All the above
Last Answer : All the above