In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above
by

1 Answer

Answer :

Ans- a. more time and labour.

 


by

Related questions

the capacity of ultra-low volume spray a) less than 5 litres/hector b) more than 5 litres/ hector c) 5 to 400 litres/hector d) More than 400 litres/hector

Description : the capacity of ultra-low volume spray a) less than 5 litres/hector b) more than 5 litres/ hector c) 5 to 400 litres/hector d) More than 400 litres/hector

Last Answer : less than 5 litres/hector

Ultra Low volume (UVL) sprays is less than 5 litre spray/ hector a. 2 liter spray/ hector b. 3 liter spray/ hector

Description : Ultra Low volume (UVL) sprays is less than 5 litre spray/ hector a. 2 liter spray/ hector b. 3 liter spray/ hector

Last Answer : Ans- c. 5 litre spray/ hector

High volume spray is more than b. 500liter spray/ hector c. 600liter spray/ hector d. None of above

Description : High volume spray is more than b. 500liter spray/ hector c. 600liter spray/ hector d. None of above

Last Answer : Ans- a. 400liter spray/ hector

is not a type of spray a) High volume spray b) Medium volume spray c) Low volume spray d) Ultra low volume spray

Description : is not a type of spray a) High volume spray b) Medium volume spray c) Low volume spray d) Ultra low volume spray

Last Answer : Medium volume spray

The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Description : The resection by two point problem as compared to three point problem (A) Gives more accurate problem (B) Takes less time (C) Requires more labour (D) None of the above

Last Answer : (C) Requires more labour

As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Description : As compared to wall type breakwater, mound type breakwater (A) Requires skilled labour (B) Requires low maintenance cost (C) Requires less material (D) Results in less damage due to gradual failure

Last Answer : (D) Results in less damage due to gradual failure

Low volume sprays is a. 10 to 400liter spray/ hector b. 5 to 400liter spray/ hector. c. 15 to 400liter spray/ hector d. None of above

Description : Low volume sprays is a. 10 to 400liter spray/ hector b. 5 to 400liter spray/ hector. c. 15 to 400liter spray/ hector d. None of above

Last Answer : Ans- b. 5 to 400liter spray/ hector

A motor enclosure which protects against falling liquids is classified as ____________. A. waterproof B. drip proof C. spray tight D. spray proof

Description : A motor enclosure which protects against falling liquids is classified as ____________. A. waterproof B. drip proof C. spray tight D. spray proof

Last Answer : Answer: B

The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Description : The equipment used in the extraction of highly corrosive radioactive liquids is (A) Pulse column (B) Spray column (C) Mixer settler (D) Baffle tower

Last Answer : (A) Pulse column

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Description : In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C

Last Answer : 100C

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

From the following which is the benefits of AS/RS a.Less product damage b.Good and easy housekeeping in FMS c.Reduce labour cost d.All of the above

Description : From the following which is the benefits of AS/RS a.Less product damage b.Good and easy housekeeping in FMS c.Reduce labour cost d.All of the above

Last Answer : d.All of the above

Pick out the wrong statement. (A) Trouton's ratio of non-polar liquids is calculated using Kistyakowsky equation (B) Thermal efficiency of a Carnot engine is always less than 1 (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation (D) None of these

Description : Pick out the wrong statement. (A) Trouton's ratio of non-polar liquids is calculated using Kistyakowsky equation (B) Thermal efficiency of a Carnot engine is always less than 1 (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation (D) None of these

Last Answer : (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and other gases (B) Dehumidification of air and gas (C) Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Description : Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and ... Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Last Answer : (D) Decolouration of yellow glycerine

or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.

Description : or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.

Last Answer : C. The VMD is larger than the NMD.

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 units of labour. There is a no other constraint on production. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Description : Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 ... both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Last Answer : from statement I : Let the price of product Q be P' Then the price of product R is 4P From Statement II: Cost of product Q =2 Cost of product R=5 Therefore, Profit percentage of product ... )=80P-100 Hence, product R is more profitable. Both statements are required to answer the question Answer :c

Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 units of labour. There is a no other constraint on production. If the question can be answered with the help of statement I alone, If the question can be answered with the help of statement II alone, If both,statement I and statement II are needed to answer the question If the question cannot be answered even with the help of both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Description : Is it more profitable for Company M to produce Q? I. Product R sells at a price four times that of Q II. One unit of Q requires 2 units of labour, while one unit of R requires 5 ... both the statements. If the data in either statement I or statement II alone is sufficient to answer the question

Last Answer : from statement I : Let the price of product Q be P' Then the price of product R is 4P From Statement II: Cost of product Q =2 Cost of product R=5 Therefore, Profit percentage of product ... )=80P-100 Hence, product R is more profitable. Both statements are required to answer the question Answer :c

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure

Description : Surface tension of liquids is the result of which the following: w) interaction of a liquid with its container x) unbalanced forces on the liquid's surface molecules y) adhesive forces of the liquid z) interaction of the liquid's surface molecules and the applied pressure

Last Answer : ANSWER: X -- UNBALANCED FORCES ON THE LIQUID'S SURFACE MOLECULES

An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Description : An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Last Answer : Answer : a

Micro irrigation method, in which water is applied as spray

Description : Micro irrigation method, in which water is applied as spray

Last Answer : Ans.Sprinkler method

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Last Answer : d. Friction between dry surfaces

______________ is the temperature at which liquids start to boil or the temperature at which vapors begin to condense.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : ______________ is the temperature at which liquids start to boil or the temperature at which vapors begin to condense.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturation Temperature

Which of the following have the highest thermal conductivities?  a. liquids  b. gases  c. metals  d. solids other than metals

Description : Which of the following have the highest thermal conductivities?  a. liquids  b. gases  c. metals  d. solids other than metals

Last Answer : metals

Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Description : Solids and liquids have  (a) one value of specific heat (ft) two values of specific heat  (c) three values of specific heat  (d) no value of specific heat  (e) one value under some conditions and two values under other conditions.

Last Answer : Answer : a

Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Description : Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Last Answer : ans a

A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Description : A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Last Answer : ans d

. Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Description : . Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Last Answer : Ans- b. elliptical.

amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liqui

Description : amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liquid

Last Answer : 90 litres liquid

Area that one man can spray in a day is: A. 0.1 ha B. 0.2 ha C. 0.3 ha. D. 9.4 ha

Description : Area that one man can spray in a day is: A. 0.1 ha B. 0.2 ha C. 0.3 ha. D. 9.4 ha

Last Answer : 9.4 ha

nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Description : nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Last Answer : Fan nozzle

Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Description : Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Last Answer : All of the above

A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework

Description : A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework

Last Answer : Handle, beam

Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Description : Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Last Answer : Pressure regulator

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Description : Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Last Answer : All of the above

Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Description : Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Last Answer : Reversible shovels, curved tynes

Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower

Description : Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower

Last Answer : Spray cooling pond

The main purpose of agricultural processing (a) Increase production (c) Reduce labour (b) Increase speed of working (d) None

Description : The main purpose of agricultural processing (a) Increase production (c) Reduce labour (b) Increase speed of working (d) None

Last Answer : Increase production

Advantages of mechanisation is..... a) substitute for labour. c) amenity reasons b) attract or retain farm staff d) all of the above

Description : Advantages of mechanisation is..... a) substitute for labour. c) amenity reasons b) attract or retain farm staff d) all of the above

Last Answer : all of the above

The step towards development of an appropriate agricultural technique in india is working towards the motto of saving......... a) labour b) cost c) surplus labour d) all of the above

Description : The step towards development of an appropriate agricultural technique in india is working towards the motto of saving......... a) labour b) cost c) surplus labour d) all of the above

Last Answer : all of the above

In any industry,the three top operating expenses are often Found to be energy a) electrical & thermal. c) none b) labour and materials. d) option a & b

Description : In any industry,the three top operating expenses are often Found to be energy a) electrical & thermal. c) none b) labour and materials. d) option a & b

Last Answer : option a & b

In any industry three top operating expenses are found to be ________. a) wnergy. b) labour cost c) all of the above d) material

Description : In any industry three top operating expenses are found to be ________. a) wnergy. b) labour cost c) all of the above d) material

Last Answer : all of the above