High volume spray is more than b. 500liter spray/ hector c. 600liter spray/ hector d. None of above

High volume spray is more than b. 500liter spray/ hector c. 600liter spray/ hector d. None of above
by

1 Answer

Answer :

Ans- a. 400liter spray/ hector


by

Related questions

the capacity of ultra-low volume spray a) less than 5 litres/hector b) more than 5 litres/ hector c) 5 to 400 litres/hector d) More than 400 litres/hector

Description : the capacity of ultra-low volume spray a) less than 5 litres/hector b) more than 5 litres/ hector c) 5 to 400 litres/hector d) More than 400 litres/hector

Last Answer : less than 5 litres/hector

Ultra Low volume (UVL) sprays is less than 5 litre spray/ hector a. 2 liter spray/ hector b. 3 liter spray/ hector

Description : Ultra Low volume (UVL) sprays is less than 5 litre spray/ hector a. 2 liter spray/ hector b. 3 liter spray/ hector

Last Answer : Ans- c. 5 litre spray/ hector

Low volume sprays is a. 10 to 400liter spray/ hector b. 5 to 400liter spray/ hector. c. 15 to 400liter spray/ hector d. None of above

Description : Low volume sprays is a. 10 to 400liter spray/ hector b. 5 to 400liter spray/ hector. c. 15 to 400liter spray/ hector d. None of above

Last Answer : Ans- b. 5 to 400liter spray/ hector

The state of panjab has the highest average farm power intensity of……….. 2.5Kw/hector b. 3.5KW/ hector c. 4.5Kw/hector d. 5.5Kw/ hector

Description : The state of panjab has the highest average farm power intensity of……….. 2.5Kw/hector b. 3.5KW/ hector c. 4.5Kw/hector d. 5.5Kw/ hector

Last Answer :  b. 3.5KW/ hector

Punjab has farm power ok intensity of ...... a. 200 W/ hector. c) 150 kW/hector b. 3.5 kW/hector d) 3.5 W/hector

Description : Punjab has farm power ok intensity of ...... a. 200 W/ hector. c) 150 kW/hector b. 3.5 kW/hector d) 3.5 W/hector

Last Answer : 3.5 kW/hector

In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

Description : In High volume spray the dilute liquids are applied by machine requires b. b less time and labour c. c. Less time and more labour d. d. None of above

Last Answer : Ans- a. more time and labour.  

is not a type of spray a) High volume spray b) Medium volume spray c) Low volume spray d) Ultra low volume spray

Description : is not a type of spray a) High volume spray b) Medium volume spray c) Low volume spray d) Ultra low volume spray

Last Answer : Medium volume spray

You and Hector are in the car. You are in the passenger seat while Hector is driving. Hector is very good at driving. He closes his eyes to scare you as he is driving.You look at him and see his eyes closed. Your heart starts pounding because there is something in the road and Hector has to swerve out of the way, but with his eyes closed he can't see it, yet he still swerved out of the way and kept driving perfectly. Along with his eyes being closed the whole time, you were also silent the whole time. How is that possible that he knew something was in the way with his eyes closed? -Riddles

Description : You and Hector are in the car. You are in the passenger seat while Hector is driving. Hector is very good at driving. He closes his eyes to scare you as he is driving.You look at him and see ... whole time. How is that possible that he knew something was in the way with his eyes closed? -Riddles

Last Answer : Since you are in the passenger seat, when you look at Hector all you see is the right side of his face, only his right eye. He had his right eye closed and his left eye opened. You just could't see it.

What is the symbol of Hector ?

Description : What is the symbol of Hector ?

Last Answer : Hector symbol h

Why does mr pendanski hesitate when the warden asked for Hector Zeroni file?

Description : Why does mr pendanski hesitate when the warden asked for Hector Zeroni file?

Last Answer : He hesitated when the Warden asked for the Hector Zerionis file because he could not find it, he did not know where it was.

What central theme does Hector want his audience to remember best in The Iliad?

Description : What central theme does Hector want his audience to remember best in The Iliad?

Last Answer : Which central theme does hector want his audience to remember best? Theme D because he ends his speech with this theme

How many children does Hector Berlioz have?

Description : How many children does Hector Berlioz have?

Last Answer : 1

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Description : Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Last Answer : ans a

A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Description : A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Last Answer : ans d

. Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Description : . Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Last Answer : Ans- b. elliptical.

amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liqui

Description : amount of liquid that a man can spray in a day is: A. 60 litres liquid B. 70 litres liquid C. 80 litres liquid D. 90 litres liquid

Last Answer : 90 litres liquid

Area that one man can spray in a day is: A. 0.1 ha B. 0.2 ha C. 0.3 ha. D. 9.4 ha

Description : Area that one man can spray in a day is: A. 0.1 ha B. 0.2 ha C. 0.3 ha. D. 9.4 ha

Last Answer : 9.4 ha

nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Description : nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Last Answer : Fan nozzle

Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Description : Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Last Answer : All of the above

A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework

Description : A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework

Last Answer : Handle, beam

Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Description : Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Last Answer : Pressure regulator

Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Description : Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Last Answer : All of the above

Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Description : Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Last Answer : Reversible shovels, curved tynes

Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower

Description : Which of the following is the simplest method of cooling the condenser water? • Spray cooling pond • Cooling tower • Indirect air cooling • Hyperbolic cooling tower

Last Answer : Spray cooling pond

or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.

Description : or a given spray sample: A. The volume median diameter (VMD) is equal to number median diameter (NMD). B. The VMD is less than the NMD. C. The VMD is larger than the NMD. D. None of the above.

Last Answer : C. The VMD is larger than the NMD.

Volume of spray fluid in ultra low vol- ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha

Description : Volume of spray fluid in ultra low vol- ume spraying a).300-500 l/ha b).2-5 l/ha c).25-50 l/ha d).100-150 l/ha

Last Answer : b).2-5 l/ha

An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Description : An ideal gas as compared to a real gas at very high pressure occupies  (a) more volume  (b) less volume  (c) same volume  (d) unpredictable behaviour  (e) no such correlation.

Last Answer : Answer : a

Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

Description : Ultra low volume sprayer consist of high spinning disc which makes droplet size a. 50 -100mm. b 40-100mm. c.35-100mm. d. None of above

Last Answer : Ans- c. 35-100mm.

The value of specific heat at constant pressure (cp) is __________ that of at constant volume (cv).  A. less than  B. equal to  C. more than

Description : The value of specific heat at constant pressure (cp) is __________ that of at constant volume (cv).  A. less than  B. equal to  C. more than

Last Answer : Answer: C

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is  A. equal to one  B. less than one  C. greater than one  D. none of these

Description : The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is  A. equal to one  B. less than one  C. greater than one  D. none of these

Last Answer : Answer: C

Does anyone know of a place I can purchase Molotow or other high end spray paints in the Washington, DC area?

Description : Does anyone know of a place I can purchase Molotow or other high end spray paints in the Washington, DC area?

Last Answer : Plaza artist supply has stores in the DC area and they have spray paint and such for art. Their website: http://www.plazaart.com/

. __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Description : . __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Last Answer : (B) Bubble

When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Description : When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Last Answer : (D) Bubble

The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Description : ____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Last Answer : a.Work envelope

Which of the following is dimensionless? a.Specific speed b.Specific volume c.Specific gravity d.Specific weight e.None of the above

Description : Which of the following is dimensionless? a.Specific speed b.Specific volume c.Specific gravity d.Specific weight e.None of the above

Last Answer : c. Specific gravity

A piece of wetted wood just floats in water. When placed in an oil of specific gravity 0.75, it will a.Float with upside down b.Sink c.Float for sometime and then sink d.Float with 3/4 of volume above the liquid surface e.Float with 1/4 of volume above the liquid level

Description : A piece of wetted wood just floats in water. When placed in an oil of specific gravity 0.75, it will a.Float with upside down b.Sink c.Float for sometime and then sink d.Float with 3/4 of volume above the liquid surface e.Float with 1/4 of volume above the liquid level

Last Answer : b. Sink

Out of constant pressure and constant volume lines on TS diagram which line has higher slope ? And whether slope is constant or variable ?

Description : Out of constant pressure and constant volume lines on TS diagram which line has higher slope ? And whether slope is constant or variable ?

Last Answer : Constant volume line. Slope is variable.

How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Description : How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ?

Last Answer : Work remains unaltered and volumetric efficiency decreases.

What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant enthalpy, and constant entropy processes.

Description : What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant enthalpy, and constant entropy processes.

Last Answer : Isothermal, isochroic, isobaric, free expression, throttling and adiabatic processes respectively.

At absolute zero temperature, the __________ of the gas is zero. (A) Pressure (B) Volume (C) Mass (D) None of these

Description : At absolute zero temperature, the __________ of the gas is zero. (A) Pressure (B) Volume (C) Mass (D) None of these

Last Answer : (B) Volume

Mollier chart is a __________ plot. (A) Pressure vs. enthalpy (B) Pressure vs. volume (C) Enthalpy vs. entropy (D) Temperature vs. entropy

Description : Mollier chart is a __________ plot. (A) Pressure vs. enthalpy (B) Pressure vs. volume (C) Enthalpy vs. entropy (D) Temperature vs. entropy

Last Answer : (C) Enthalpy vs. entropy

For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Description : For a thermodynamic system undergoing a process, which of the following pairs best expresses the relationship similar to that expressed by the pressure volume plot? (A) Temperature - entropy (B) Temperature - pressure (C) Enthalpy - entropy

Last Answer : (A) Temperature - entropy

What Is Variable Air Volume System & Dual Duct System?

Description : What Is Variable Air Volume System & Dual Duct System?

Last Answer : Variable Air Volume (VAV) is a type of heating, ventilating, and/or air-conditioning (HVAC) system. Unlike constant air volume (CAV) systems, which supply a constant airflow at a variable temperature, VAV systems vary the airflow at a constant temperature.

What Is Constant Volume System?

Description : What Is Constant Volume System?

Last Answer : Constant Air Volume (CAV) is a type of heating, ventilating, and air-conditioning (HVAC) system. In a simple CAV system, the supply air flow rate is constant, but the supply air temperature is varied to meet the thermal loads of a space. Most CAV systems are small, and serve a single thermal zone.

If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Description : If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Last Answer : ans 2

Piston displacement is the volume displaced by the piston during one stroke and is usually expressed in 1. Cubic meter 2.cubic inches 3. Both of these 4. none of these

Description : Piston displacement is the volume displaced by the piston during one stroke and is usually expressed in 1. Cubic meter 2.cubic inches 3. Both of these 4. none of these

Last Answer :    <!-- [endif] -->ans-1