The main advantage of using long handle weeders is b. Less area of coverage c. Cheaper cost of weeder d. None of above

The main advantage of using long handle weeders is b. Less area of coverage c. Cheaper cost of weeder d. None of above
by

1 Answer

Answer :

Ans - a. Less drudgery to operator


by

Related questions

Sweep and Junior hoe weeder have coverage capacity of a. 1 ha per day. b. 0.5 ha per day. c. 0.75 ha per day. d. None of above

Description : Sweep and Junior hoe weeder have coverage capacity of a. 1 ha per day. b. 0.5 ha per day. c. 0.75 ha per day. d. None of above

Last Answer : Ans- c. 0.75 ha per day.

The coverage of is dry land weeder is 0.05 ha/day. a. Peg c. 0.05 ha/day.d. None of the above.

Description : The coverage of is dry land weeder is 0.05 ha/day. a. Peg c. 0.05 ha/day.d. None of the above.

Last Answer : Ans - b. star

In dry land weeder coverage is ha/day a. 0.05 b. 0.07 c. 0.1 d. 0.18

Description : In dry land weeder coverage is ha/day a. 0.05 b. 0.07 c. 0.1 d. 0.18

Last Answer :  0.05

Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper

Description : Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper

Last Answer : d.It's cheaper

has a long handled tool and a 120 mm diameter star wheel a) Engine operated weeder b) Cono weeder for paddy c) Dry land weeder d) Sweep

Description : has a long handled tool and a 120 mm diameter star wheel a) Engine operated weeder b) Cono weeder for paddy c) Dry land weeder d) Sweep

Last Answer : Dry land weeder

It is a machine designed for harvesting ,threshing,separating, cleaning and collecting grains while moving through standing crops. a. Weeder b. thresher d. None of above

Description : It is a machine designed for harvesting ,threshing,separating, cleaning and collecting grains while moving through standing crops. a. Weeder b. thresher d. None of above

Last Answer : Ans-          c. COMBINE

It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Description : It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Last Answer : Ans-                              b. thresher  

Swath is material left by the……………. a. Weeder b. thrasher d. None of above

Description : Swath is material left by the……………. a. Weeder b. thrasher d. None of above

Last Answer : Ans-                         c. harvesting machine.

It is a machine to cut grain crops. a. Weeder b. thrasher d. None of above

Description : It is a machine to cut grain crops. a. Weeder b. thrasher d. None of above

Last Answer : Ans-             c. Reaper  

It is intercultural implement used for removing shallow rooted weeds in between crop rows. a. Cono weeder b. Junior hoe d. None of above

Description : It is intercultural implement used for removing shallow rooted weeds in between crop rows. a. Cono weeder b. Junior hoe d. None of above

Last Answer : Ans- c. Sweep

Engine operated weeder has capacity of a. 1 ha per day b. 0.75 ha per day c. 0.5 ha per day d. None of above

Description : Engine operated weeder has capacity of a. 1 ha per day b. 0.75 ha per day c. 0.5 ha per day d. None of above

Last Answer : Ans- b. 0.75 ha per day.

Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above

Description : Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above

Last Answer : Ans- b. serrated projection

Cono weeder is useful for a. Wheat b. Soya bean d. None of above

Description : Cono weeder is useful for a. Wheat b. Soya bean d. None of above

Last Answer : Ans- c. paddy

The type wheel is suitable for lomy and sandy soil in dry land weeder. a. Peg c. cono d. None of the above.

Description : The type wheel is suitable for lomy and sandy soil in dry land weeder. a. Peg c. cono d. None of the above.

Last Answer : Ans - b. star

Star wheel diameter is in dry land weeder. a. 100 mm b. 110mm d. None of the above.

Description : Star wheel diameter is in dry land weeder. a. 100 mm b. 110mm d. None of the above.

Last Answer : Ans - c. 120mm

Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.

Description : Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.

Last Answer : Ans - b. dry

Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.

Description : Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.

Last Answer : For uprooting and burying weeds in between standing rows of rice crops in in wetland.

Which equipment is used for weeding in Row crops in rain fed. a) Puddy cono weeder b) Engine operated weeder c) Dry land weeder d) Seed drill

Description : Which equipment is used for weeding in Row crops in rain fed. a) Puddy cono weeder b) Engine operated weeder c) Dry land weeder d) Seed drill

Last Answer : Dry land weeder

machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder

Description : machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder

Last Answer : Seed drill

equipment is used for wedding in between rows of standing crops. a) Engine operated weeder b) Cono weeder for puddy c) Junior how d) Dry land weeder

Description : equipment is used for wedding in between rows of standing crops. a) Engine operated weeder b) Cono weeder for puddy c) Junior how d) Dry land weeder

Last Answer : Junior how

weeder is useful for weeding crops like tapioca ,cotton ,sugarcane, tomato and pulses a) Engine operated weeder b) Sweep c) Cono weeder for paddy d) Junior hoe

Description : weeder is useful for weeding crops like tapioca ,cotton ,sugarcane, tomato and pulses a) Engine operated weeder b) Sweep c) Cono weeder for paddy d) Junior hoe

Last Answer : Engine operated weeder

is useful for uprooting and burying weeds between standing rows of rice crops in wetlands a) Sweep b) Engine operated weeder c) Cono weeder for paddy d) Dry land weeder

Description : is useful for uprooting and burying weeds between standing rows of rice crops in wetlands a) Sweep b) Engine operated weeder c) Cono weeder for paddy d) Dry land weeder

Last Answer :   <!-- [endif] -->Cono weeder for paddy

The main advantage of using worm gears is a.Low power loss b.High velocity ratio c.Ease of manufacture d.Minimum cost e.All of the above

Description : The main advantage of using worm gears is a.Low power loss b.High velocity ratio c.Ease of manufacture d.Minimum cost e.All of the above

Last Answer : c. Ease of manufacture

A dry land weeder covers an area (in hactare) per day (8 hour): A)0.1 b)0.2 C)0.3 c)0.4

Description : A dry land weeder covers an area (in hactare) per day (8 hour): A)0.1 b)0.2 C)0.3 c)0.4

Last Answer : b)0.2

A major and basic advantage for the use of a klystron. A. High power B. Efficiency C. Lesser noise D. Cheaper

Description : A major and basic advantage for the use of a klystron. A. High power B. Efficiency C. Lesser noise D. Cheaper

Last Answer : A. High power

The disc is usually the preferred system as it takes and can handle obstacles much easier. A. Less power. C) More power B. Moderate power. D) None of the above

Description : The disc is usually the preferred system as it takes and can handle obstacles much easier. A. Less power. C) More power B. Moderate power. D) None of the above

Last Answer : Less power

What Are The Main Advantage Of Fms?

Description : What Are The Main Advantage Of Fms?

Last Answer : The main advantage of FMS is its high flexibility in managing manufacturing resources. The resulting gains are numerous including:  Reduced manufacturing cost,  Greater labor productivity,  ... requires a large initial capital and substantial preplanning. It also requires high skilled labor.

The main disadvantage of 'Radio' as an Advertisement medium is ____________ 1. No visual information 2. Narrow coverage 3. High cost 4. All of these 5. None of these

Description : The main disadvantage of 'Radio' as an Advertisement medium is ____________ 1. No visual information 2. Narrow coverage 3. High cost 4. All of these 5. None of these

Last Answer : No visual information

In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Description : In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Last Answer : c. Mechanical advantage is less than velocity ratio

The Sweep coverage is to ha/day. a. 1.75 to 2.5 b. 1.95 to 3.5 c. 1.35 to 2.3

Description : The Sweep coverage is to ha/day. a. 1.75 to 2.5 b. 1.95 to 3.5 c. 1.35 to 2.3

Last Answer :  1.75 to 2.5

In junior hoe the coverage is _ ha per day a) 1.5 b) 2.5 c) 1.7 d) 3.0

Description : In junior hoe the coverage is _ ha per day a) 1.5 b) 2.5 c) 1.7 d) 3.0

Last Answer : 1.5

Star weeder is used for

Description : Star weeder is used for

Last Answer : Ans.Weeding in dry lands and groundnut fields

Electricity is transmitted over long distances – (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Description : Electricity is transmitted over long distances – (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Last Answer : (2) there is less wastage of energy Explanation: Long distance means higher wastage of energy. So High volt direct-current (HVDC) technology is used forgreater efficiency in very long distances. ... at high voltages (110 kV or above) to reduce the energy lost in long-distance transmission.

Which of the following statements relating to working capital financing is not correct? A. An aggressive policy uses long-term debt to finance fluctuating current assetsB. Long-term debt is less risky that short-term debt C. A conservative policy uses long-term debt to finance fixed assets D. Short-term debt is cheaper than long-term debt E. The matching principle indicates that fluctuating current assets should be financed by short-term debt

Description : Which of the following statements relating to working capital financing is not correct? A. An aggressive policy uses long-term debt to finance fluctuating current assets B. Long-term debt ... . The matching principle indicates that fluctuating current assets should be  financed by short-term debt

Last Answer : A. An aggressive policy uses long-term debt to finance fluctuating current assets

Electricity is transmitted over long distances (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Description : Electricity is transmitted over long distances (1) it is fast (2) there is less wastage of energy (3) it is safer (4) it is cheaper

Last Answer : there is less wastage of energy

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

What is the best way to handle a situation when you know you're being taken advantage of?

Description : What is the best way to handle a situation when you know you're being taken advantage of?

Last Answer : co-worker of*

_______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Description : _______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Last Answer : a) DRAM

The main advantage of ketorolac over aspirin is that ketorolac (a) Can be combined more safely with an opioid such as codeine (b) Can be obtained as an over-the-counter agent (c) Does not prolong the bleeding time (d) Is available in a parenteral formulation that can be injected intramuscularly or intravenously (e) Is less likely to cause acute renal failure in patients with some preexisting degree of renal impairment

Description : The main advantage of ketorolac over aspirin is that ketorolac (a) Can be combined more safely with an opioid such as codeine (b) Can be obtained as an over-the-counter agent (c) Does not ... (e) Is less likely to cause acute renal failure in patients with some preexisting degree of renal impairment

Last Answer : Ans: D

What is the main advantage of hydrodynamic bearing over roller bearing? (a) Easy to assemble [IES-2005] (b) Relatively low price (c) Superior load carrying capacity at higher speeds (d) Less frictional resistance

Description : What is the main advantage of hydrodynamic bearing over roller bearing? (a) Easy to assemble [IES-2005] (b) Relatively low price (c) Superior load carrying capacity at higher speeds (d) Less frictional resistance

Last Answer : (c) Superior load carrying capacity at higher speeds

.The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Description : .The main advantage of amalgam with high content of Cu is: A. Better marginal sealing B. Less corrosion C. Better tensile strength D. Higher and immediate compressive strength

Last Answer : B. Less corrosion

The main reason for establishing sales territories to 1. secure optimum market coverage 2. reduce selling expenses 3. facilitate planning and control of selling operations 4. improve sales force performance and morale 5. none of these

Description : The main reason for establishing sales territories to 1. secure optimum market coverage 2. reduce selling expenses 3. facilitate planning and control of selling operations 4. improve sales force performance and morale 5. none of these

Last Answer : secure optimum market coverage

…………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Description : …………………………... moves the trash and roots from ahead of shin towords the main furrow so as 10 ensure complete coverage by the plough bottom a. Coulter b. Jointer c. Mould board d. Shin

Last Answer : b. Jointer

For most companies, the main objective of physical distribution is to A)decrease costs while increasing market coverage. B)increase service and market coverage. C)decrease costs while increasing service. D)increase market coverage and channel power. E)balance costs and market coverage.

Description : For most companies, the main objective of physical distribution is to A)decrease costs while increasing market coverage. B)increase service and market coverage. C)decrease costs while increasing service. D)increase market coverage and channel power. E)balance costs and market coverage.

Last Answer : C)decrease costs while increasing service.

Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) Carbon percentage in high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Description : Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) ... high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel

Last Answer : Answer: Option A

Which of the following statements is considered to be a DISADVANTAGE of using industrial distributors? A)Industrial distributors possess considerable technical and market information. B)The traditional marketing exchange relationship is heavily focused. C)They are less likely to handle bulky items or items that are slow sellers. D)Industrial distributors sell specific brands aggressively. E)Industrial distributors acquire title to the products and take possession.

Description : Which of the following statements is considered to be a DISADVANTAGE of using industrial distributors? A)Industrial distributors possess considerable technical and market information. B)The ... brands aggressively. E)Industrial distributors acquire title to the products and take possession.

Last Answer : D)Industrial distributors sell specific brands aggressively.

Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Description : Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Last Answer : It depends on whether or not you have a continuous duty air compressor or not. A continuous duty compressor means that it is able to run for long periods of time (aka continuously). This type of ... that you give it time to cool off when filling the tank, otherwise you would be going overboard.

A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework

Description : A and are fixed to the framework for guiding. a) Nozeel cap , disc b) Handle, beam c) Spray boom, filter d) Shovel can, framework

Last Answer : Handle, beam

it‘s consists of former board , beam and handle. A. Ridger. C Cultivator B. Puddler. D Bund former

Description : it‘s consists of former board , beam and handle. A. Ridger. C Cultivator B. Puddler. D Bund former

Last Answer : Ridger

The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Description : The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Last Answer : Share, landside , frog and Mb