Vertical conveyor reaper is mostly used for paddy and………... b. Soybean c. Ground nut d. None of above

Vertical conveyor reaper is mostly used for paddy and………... b. Soybean c. Ground nut d. None of above
by

1 Answer

Answer :

Ans-    a. wheat

by

Related questions

is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Last Answer : MOVER

Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h

Description : Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h

Last Answer : 0.4-0.6 ha/h

In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar

Last Answer : Star wheel

enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Last Answer : (a) 1.5-3.0m

is the range of capacity of Vertical Conveyer reaper a) 0.1- 0.5 ha/h b) 0.4-0.6 ha/h c) 10-15 ha/h d) None of the above

Description : is the range of capacity of Vertical Conveyer reaper a) 0.1- 0.5 ha/h b) 0.4-0.6 ha/h c) 10-15 ha/h d) None of the above

Last Answer :  0.4-0.6 ha/h

What is the correct order of C3plants ? (a) Sugarcane — Paddy – Bajra—Maize (b) Groundnut — Potato — Wheat— Soybean(c) Potato — Paddy — Bajra —W’heat (d) Paddy – Sugarcane – Soybean –Bajra

Description : What is the correct order of C3plants ? (a) Sugarcane — Paddy – Bajra—Maize (b) Groundnut — Potato — Wheat— Soybean(c) Potato — Paddy — Bajra —W’heat (d) Paddy – Sugarcane – Soybean –Bajra

Last Answer : (c) Potato — Paddy — Bajra —W’heat

It is a machine to cut herbage crops and leave them in a swath. b. thrasher c. Reaper. d. None of above

Description : It is a machine to cut herbage crops and leave them in a swath. b. thrasher c. Reaper. d. None of above

Last Answer : Ans-                                                                             a. Mower

The reaper in a tractor can be raised or lowered by a) Mechanically b) Pneumatic system c) Hydraulic system d) Electric system

Description : The reaper in a tractor can be raised or lowered by a) Mechanically b) Pneumatic system c) Hydraulic system d) Electric system

Last Answer : Hydraulic system

To separate grains from the harvested crop and provide clean grain without much loss and damage which called as A) Potato digger elevator B) Groundnut digger shaker C) Reaper binder D) Threshing

Description : To separate grains from the harvested crop and provide clean grain without much loss and damage which called as A) Potato digger elevator B) Groundnut digger shaker C) Reaper binder D) Threshing

Last Answer : Threshing

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Last Answer : a.Industrial Robot

From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Description : From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Last Answer : c.Both A & B

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum reactions on the ground would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Description : The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum ... would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Last Answer : e. 4.4 tonnes

The mowers are designed to cut 1. Wheat 2. Paddy 3. Mustard 4. grasses

Description : The mowers are designed to cut 1. Wheat 2. Paddy 3. Mustard 4. grasses

Last Answer : ans 4

The Japanese type rotary thresher is used for threshing a) Paddy b) Wheat c) Sunflower d) Safflower

Description : The Japanese type rotary thresher is used for threshing a) Paddy b) Wheat c) Sunflower d) Safflower

Last Answer : Paddy 

Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.

Description : Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.

Last Answer : For uprooting and burying weeds in between standing rows of rice crops in in wetland.

has a long handled tool and a 120 mm diameter star wheel a) Engine operated weeder b) Cono weeder for paddy c) Dry land weeder d) Sweep

Description : has a long handled tool and a 120 mm diameter star wheel a) Engine operated weeder b) Cono weeder for paddy c) Dry land weeder d) Sweep

Last Answer : Dry land weeder

weeder is useful for weeding crops like tapioca ,cotton ,sugarcane, tomato and pulses a) Engine operated weeder b) Sweep c) Cono weeder for paddy d) Junior hoe

Description : weeder is useful for weeding crops like tapioca ,cotton ,sugarcane, tomato and pulses a) Engine operated weeder b) Sweep c) Cono weeder for paddy d) Junior hoe

Last Answer : Engine operated weeder

is useful for uprooting and burying weeds between standing rows of rice crops in wetlands a) Sweep b) Engine operated weeder c) Cono weeder for paddy d) Dry land weeder

Description : is useful for uprooting and burying weeds between standing rows of rice crops in wetlands a) Sweep b) Engine operated weeder c) Cono weeder for paddy d) Dry land weeder

Last Answer :   <!-- [endif] -->Cono weeder for paddy

Give reason: It is slightly difficult to pull out a bean plant from the ground than a paddy plan

Description : Give reason: It is slightly difficult to pull out a bean plant from the ground than a paddy plan

Last Answer : Bean plant has taproot system with primary root and many secondary & tertiary branches which grow deep into the soil where as paddy has fibrous root in which primary root is absent.

Safest oil for human consumption ? a Ground nut oil b Soyabean c Mustard oil d Sunflower oil

Description : Safest oil for human consumption ? a Ground nut oil b Soyabean c Mustard oil d Sunflower oil

Last Answer : d Sunflower oil

If the Grim Reaper existed, would there not have to be millions of them?

Description : If the Grim Reaper existed, would there not have to be millions of them?

Last Answer : Like pretty much all religious references to gods and other figures representing concepts and archetypes, the grim reaper is not a literal figure, except in overly-literal representations in art and parody, ... the state after a body dies, and yes certainly those occur in proportion to the dying.

If seasons don't fear the reaper why should we?

Description : If seasons don't fear the reaper why should we?

Last Answer : Nor do the wind, sun or the rain*

Pretend you are dying and you want to stave off “The Grim Reaper.” If you deliberately smash a mirror, doesn’t that ensure that you will be around another seven years, to have all of that bad luck?

Description : Pretend you are dying and you want to stave off “The Grim Reaper.” If you deliberately smash a mirror, doesn’t that ensure that you will be around another seven years, to have all of that bad luck?

Last Answer : I think that I understand what you're saying, if so then I'm guessing you could say that you dying would part of the bad luck, and then for the next 7 years bad luck things would happen to ... then some crazy new treatment might be approved at the last minute and it saved your life and many others.

How can i become a soul reaper?

Description : How can i become a soul reaper?

Last Answer : You can go to the dark web and type in B8 then what comes up is do you want to apply with caution then you have to agree to all of these things if you hit apply, what happens next is yet unknown but yeah

How did mechanical reaper expand the national economy?

Description : How did mechanical reaper expand the national economy?

Last Answer : Need answer

How did the new farming machines like the McCormick reaper and the cotton gin change farming in America?

Description : How did the new farming machines like the McCormick reaper and the cotton gin change farming in America?

Last Answer : Farmers could produce more. (APEX)

What impact did Cyrus McCormick's reaper and john Deere's steel plow have on agriculture?

Description : What impact did Cyrus McCormick's reaper and john Deere's steel plow have on agriculture?

Last Answer : What is the answer ?

A reaper is used for: (a) cutting crop (b) cutting and windrowing (c) cutting and threshing (d) Cutting grass

Description : A reaper is used for: (a) cutting crop (b) cutting and windrowing (c) cutting and threshing (d) Cutting grass

Last Answer : (a) cutting crop

Harvesting of wheat with bullock drawn reaper and making bundles could require a) 2 persons b) 3 persons c) 4 persons d) 5 person

Description : Harvesting of wheat with bullock drawn reaper and making bundles could require a) 2 persons b) 3 persons c) 4 persons d) 5 person

Last Answer : a) 2 persons

Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Description : Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Last Answer : d.) Cutting and windrow.

A reaper used for : a. Cutting crop b. Cutting and windrewing c. Cutting and threshing d. None of these

Description : A reaper used for : a. Cutting crop b. Cutting and windrewing c. Cutting and threshing d. None of these

Last Answer : b. Cutting and windrewing

Which layout is mostly used for the batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Description : Which layout is mostly used for the batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Last Answer : b.Process layout

Which layout is mostly used for batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Description : Which layout is mostly used for batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Last Answer : b.Process layout

The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics

Description : The finite element method is mostly used in the field of a.structural mechanics b.classical mechanics c.applied mechanics d.engineering mechanics

Last Answer : d.engineering mechanics

Fan nozzle mostly used for pressure spraying. b. high c. moderate d. None of above

Description : Fan nozzle mostly used for pressure spraying. b. high c. moderate d. None of above

Last Answer : Ans- b. low

and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Description : and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Blade harrow

The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Description : The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic

Last Answer :  Aluminium

The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Description : The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic

Last Answer : Aluminium 

cooking needs of the village are mostly met by the burning of a) Biomass b) Petrol c) Diesel d) None of the above

Description : . cooking needs of the village are mostly met by the burning of a) Biomass b) Petrol c) Diesel d) None of the above

Last Answer : Biomass

The dibbling is mostly used for sowing: A. Cereal grains B. Vegetables

Description : The dibbling is mostly used for sowing: A. Cereal grains B. Vegetables

Last Answer : Vegetables

Cocking need of villages are mostly met by the burning of . A) Biomass. C) Hydroelectric B) Crude oil. D) Neutral gas

Description : Cocking need of villages are mostly met by the burning of . A) Biomass. C) Hydroelectric B) Crude oil. D) Neutral gas

Last Answer : Biomass

64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above

Description : 64. For any company, energy consumption mostly relates to…….. a) Profits b) Inventory c) Production d) All the above

Last Answer : Production

The fuel mostly used in steam boilers is  A. brown coal  B. peat  C. coking bituminous coal  D. non-coking bituminous coal

Description : The fuel mostly used in steam boilers is  A. brown coal  B. peat  C. coking bituminous coal  D. non-coking bituminous coal

Last Answer : Answer: D

Which of the following gas is mostly used in town for street and domestic lighting and heating?  A. Producer gas  B. Coal gas  C. Mond gas  D. Coke oven gas

Description : Which of the following gas is mostly used in town for street and domestic lighting and heating?  A. Producer gas  B. Coal gas  C. Mond gas  D. Coke oven gas

Last Answer : Answer: B

Who makes the best portable conveyor?

Description : Who makes the best portable conveyor?

Last Answer : There are several good brands of portable conveyors. E-ZLift is one of the leading companies for portable conveyors.

What are conveyor belts made of?

Description : What are conveyor belts made of?

Last Answer : A conveyor belt can be made from many different things gum rubber and silicone are the main ingredients depending on strength and traction needed dyes are added and there is a fiber core for strength.

Where can I buy a belt conveyor system?

Description : Where can I buy a belt conveyor system?

Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.