Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor
Last Answer : (B) Pneumatic conveyor
Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron
Last Answer : (B) Belt
Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator
Last Answer : (C) Screw conveyor
Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo
Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor
Last Answer : (C) Flight conveyor
Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these
Last Answer : (B) Skip hoist
Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt
Last Answer : (A) Apron
Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor
Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these
Last Answer : (B) Pneumatic
Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.
Last Answer : MOVER
Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these
Last Answer : (C) Screw
Description : Trough of an apron conveyor is made of (A) Lead lined concrete vessel (B) Wood (C) Metal (D) Either (B) or (C)
Last Answer : (D) Either (B) or (C)
Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt
Last Answer : (A) Flight
Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw
Last Answer : (D) Screw
Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor
Last Answer : (C) Bucket elevators
Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing
Last Answer : (B) Sticky (e.g. clay paste
Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon
Last Answer : (B) Drag or slat
Description : Write About Screw Conveyor And Bucket Conveyors?
Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.
Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat
Last Answer : (B) Ribbon
Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck
Last Answer : (B) Belt conveyor
Description : __________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : Vertical conveyor reaper is mostly used for paddy and………... b. Soybean c. Ground nut d. None of above
Last Answer : Ans- a. wheat
Description : Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h
Last Answer : 0.4-0.6 ha/h
Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar
Last Answer : Star wheel
Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m
Last Answer : (a) 1.5-3.0m
Description : The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)
Description : Apron conveyors are used for (A) Heavy loads & short runs (B) Small loads & long runs (C) Heavy loads & long runs (D) None of these
Last Answer : (A) Heavy loads & short runs
Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B
Last Answer : (C) Both (A) & (B)
Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ
Last Answer : (A) 3.6 W.D.V.ρ
Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above
Last Answer : c.Both A & B
Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc
Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.
Description : Which type of actuator generates a good deal of power but tends to be messy? a) electric b) hydraulic c) pneumatic d) both hydraulic & pneumatic
Last Answer : b) hydraulic
Description : Pneumatic seed drills are suitable for sowing: A. Small seeds B. Bolder seeds C. Both (a) & (b) D. None of these
Last Answer : Both (a) & (b)
Description : Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B
Last Answer : Answer: Option D
Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.
Last Answer : Forward: Reverse:
Description : Which of the following is not a component of working capital? (A) Raw materials is stock (B) Finished products in stock (C) Transportation facilities (D) Semi-finished products in the process
Last Answer : (C) Transportation facilities
Description : The main function of potato digger elevator is a) Digging of potatoes b) Windrowing of potatoes b) Both (A) & (B) c) None of these
Last Answer : Both (A) & (B)
Description : __________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling
Last Answer : (D) A combination of separating & throttling
Description : Hazard and safety in Hydraulic & pneumatic
Last Answer : HAZARDS: Hydraulic equipments and systems are designed to accomplish work using confined liquid pressure to produce a greater mechanical force. The operators/ maintenance crews are subjected to hazards from ... , fitting may fail. 11) Tightening of Joints should be done in depressurized condition.
Description : How do you get rid of a stomach apron?
Last Answer : answer:surgery. A lot of it is laser these days and much less invasive. But you will have to remove some of the skin flap, a seam along the joining of groin and thigh would not look bad. Age ... contracting on its own if the underlying fat is gone. The older you are the less elasticity skin has.
Description : I have heard of a something-or-other, growing in its nook, swelling and rising, pushing up its covering. Upon that boneless thing a cocky-minded young woman took a grip with her hands; with her apron a lord’s daughter covered the tumescent thing. What is it? -Riddles
Last Answer : Dough turning into bread.
Description : Why can't a cook swallow his apron? -Riddles
Last Answer : Because it goes against his stomach.
Description : What services are offered by blue apron in 2021?
Last Answer : Blue Apron is a better way to cook. Blue Apron sends all the ingredients for inventive yet simple weeknight meals to customers weekly. Guaranteed Fresh, people are getting back into the kitchen and enjoying cooking again!cutt.ly/FjgJGuY
Description : I want to see people looking for the blue apron?
Last Answer : Blue Apron is a better way to cook. Blue Apron sends all the ingredients for inventive yet simple weeknight meals to customers weekly. Guaranteed Fresh, people are getting back into the kitchen and enjoying cooking again!cutt.ly/ujpRZYA
Description : what is the best apron prouducts?
Last Answer : Blue Apron is a better way to cook. Blue Apron sends all the ingredients for inventive yet simple weeknight meals to customers weekly. Guaranteed Fresh, people are getting back into the kitchen and enjoying cooking again!cutt.ly/oh2gXVt
Description : What do these two changes have in common sewing an apron mixing sand and water?
Last Answer : Need answer
Description : When driving across a parking apron what is the proper route a vehicle operator should use to get from point A to point B?