Differentiate Between The Uniform Flow And Non-uniform Flow?

Differentiate Between The Uniform Flow And Non-uniform Flow?
by

1 Answer

Answer :

Uniform Flow: The flow is defined as uniform flow when in the flow field the velocity and other hydrodynamic parameters do not change from point to point at any instant of time.
Non-Uniform Flow: When the velocity and other hydrodynamic parameters changes from one point to another the flow is dened as non-uniform flow.
by

Related questions

What Is The Difference Between The Unsteady Uniform Flow And Steady Uniform Flow?

Description : What Is The Difference Between The Unsteady Uniform Flow And Steady Uniform Flow?

Last Answer : Unsteady uniform flow - changes with time. Steady uniform flow - does not change with time.

A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Last Answer : Isentropic flow

What is defined as a process during which a fluid flows through a control volume steadily?  A. Transient-flow process  B. Steady and uniform process  C. Uniform-flow process  D. Steady-flow process

Description : What is defined as a process during which a fluid flows through a control volume steadily?  A. Transient-flow process  B. Steady and uniform process  C. Uniform-flow process  D. Steady-flow process

Last Answer : Steady-flow process

The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process is isentropic and specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Description : The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process ... specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Last Answer : Answer : d

When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th

Description : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th

Last Answer : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is ... . electric field C. electric potential D. current

In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant? (A) Rotational (B) Unsteady (C) Turbulent (D) Non-uniform

Description : In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant? (A) Rotational (B) Unsteady (C) Turbulent (D) Non-uniform

Last Answer : (D) Non-uniform

Fluid flow at increasing rate through a diverging pipe is an example of __________ flow. (A) Steady uniform (B) Non-steady uniform (C) Steady non-uniform (D) Non-steady non-uniform

Description : Fluid flow at increasing rate through a diverging pipe is an example of __________ flow. (A) Steady uniform (B) Non-steady uniform (C) Steady non-uniform (D) Non-steady non-uniform

Last Answer : (D) Non-steady non-uniform

The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Description : The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Last Answer : (B) Steady non uniform

Gradually varied flow in open channel is a/an __________ flow. (A) Steady uniform (B) Steady non-uniform (C) Unsteady uniform (D) Unsteady non-uniform

Description : Gradually varied flow in open channel is a/an __________ flow. (A) Steady uniform (B) Steady non-uniform (C) Unsteady uniform (D) Unsteady non-uniform

Last Answer : (B) Steady non-uniform

Momentum correction factor used in fluid flow problems accounts for the (A) Change in direction of flow (B) Change in total energy (C) Change in pressure (D) Non uniform direction of velocities at inlet & outlet sections

Description : Momentum correction factor used in fluid flow problems accounts for the (A) Change in direction of flow (B) Change in total energy (C) Change in pressure (D) Non uniform direction of velocities at inlet & outlet sections

Last Answer : (D) Non uniform direction of velocities at inlet & outlet sections

Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (D) Expanding tube at constant rate

Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Unsteady non-uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (C) Expanding tube at increasing rate

Gradually varying fluid flow is an example of __________ flow. (A) Non-steady uniform (B) Non-steady non-uniform (C) Steady uniform (D) Steady non-uniform

Description : Gradually varying fluid flow is an example of __________ flow. (A) Non-steady uniform (B) Non-steady non-uniform (C) Steady uniform (D) Steady non-uniform

Last Answer : (A) Non-steady uniform

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

Water flow in the river during flood can be categorised as the __________ flow. (A) Unsteady uniform (B) Unsteady non-uniform (C) Steady uniform (D) Steady non-uniform

Description : Water flow in the river during flood can be categorised as the __________ flow. (A) Unsteady uniform (B) Unsteady non-uniform (C) Steady uniform (D) Steady non-uniform

Last Answer : Option B

18. A flow through an expanding tube at increasing rate is called unsteady non-uniform flow. A) Yes B) No

Description : 18. A flow through an expanding tube at increasing rate is called unsteady non-uniform flow. A) Yes B) No

Last Answer : A

General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow

Description : General energy equation holds for (A) Steady flow (B) Turbulent flow (C) Laminar flow (D) Non-uniform flow

Last Answer : Answer: Option D

The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Description : The Euler's equation for the motion of liquids is based upon the assumption that (A) The fluid is non - viscous, homogeneous and incompressible (B) The velocity of flow is uniform over the section (C) The flow is continuous, steady and along the stream line (D) All of the above

Last Answer : Answer: Option D

The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different velocities (C) The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Description : The flow in a pipe or channel is said to be non-uniform when (A) The liquid particles at all sections have the same velocities (B) The liquid particles at different sections have different ... The quantity of liquid flowing per second is constant (D) Each liquid particle has a definite path

Last Answer : Answer: Option B

When the flow in an open channel is gradually varied, the flow is said to be (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : When the flow in an open channel is gradually varied, the flow is said to be (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option B

A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option A

Gradually varied flow is (A) Steady uniform (B) Non-steady non-uniform (C) Non-steady uniform (D) Steady non-uniform

Description : Gradually varied flow is (A) Steady uniform (B) Non-steady non-uniform (C) Non-steady uniform (D) Steady non-uniform

Last Answer : Answer: Option D

A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through an expanding tube at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option B

Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) Velocity, depth, pressure, etc. change from point to point in the fluid flow. (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option C

Define uniform flow and non-uniform flow and give practical example for each

Description : Define uniform flow and non-uniform flow and give practical example for each 

Last Answer : i. Uniform flow: The flow in which velocity at a given time does not change both in magnitude and direction from point to point in the flowing liquid is called uniform flow   Examples: a. ... pressure through long pipe lines of varying diameter b. Flow in river where cross sectional area changes.

Differentiate Between Herringbone Gears And Helical Gears?

Description : Differentiate Between Herringbone Gears And Helical Gears?

Last Answer :  Herringbone Gears . Double helical gears are known as Herringbone gears. These gears have teeth in series on both sides from the centre in the inclined position to the axis. These type of ... an inclined position. Helical gears are used to transmit the motion at high speed without producing noise.

If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

Description : If the scaling factors values Sx and Sy are assigned to unequal values then a.Uniform rotation is produced b.Uniform scaling is produced c.Differential scaling is produced d.Scaling cannot be done

Last Answer : c.Differential scaling is produced

If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Last Answer : b.Uniform scaling is produced

We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Last Answer : b.Fixed point

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Description : A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Last Answer : d. 100 km/hr

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Description : A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Last Answer : d. 100 km/hr

The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Description : The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Last Answer : d. Does not rotate

Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Description : A cage weighing 200 kg is lowered down a mine shaft with uniform acceleration. In the first 5 sec the cage reaches a depth of 20 m. The tension in the cord lowering the cage would be a.836 kg b.167.2 kg c.100 kg d.41.8 kg e.200 kg

Last Answer : b. 167.2 kg

A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Description : A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Last Answer : b. 31.4 rad/s2

The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift is moving down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement

Description : The tension in the wire rope supporting a lift moving with a uniform velocity a.Is more when the lift is moving upwards b.Is more when the lift is moving downwards c.Is less when the lift ... down-wards d.Is less when the lift is moving upwards e.Remains constant irrespective of the lift movement

Last Answer : e. Remains constant irrespective of the lift movement

Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Description : Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Last Answer : d. None of the above

The difference between seed drill and planter is a) Variation in hill to hill spacing b) Number of seed per hill is more uniform in planter c) Seed delivery tube d) Furrow opener e) Both a and b Ans. e

Description : The difference between seed drill and planter is a) Variation in hill to hill spacing b) Number of seed per hill is more uniform in planter c) Seed delivery tube d) Furrow opener e) Both a and b Ans. e

Last Answer : ans e

It is a machine used for placing the seeds in a continuous stream in furrows at uniform rate and at controlled depth with an arrangement of covering the seeds with soil. a. Seed tube b. Seed dropper d. None of the above.

Description : It is a machine used for placing the seeds in a continuous stream in furrows at uniform rate and at controlled depth with an arrangement of covering the seeds with soil. a. Seed tube b. Seed dropper d. None of the above.

Last Answer : Ans - c. Seed drill

In Hill dropping few seeds are dropped as a hill at a fixed place and not in a continuous stream. The spacing between hill to hill in a row is …………. a.Inclined b. Not uniform d. None of the above

Description : In Hill dropping few seeds are dropped as a hill at a fixed place and not in a continuous stream. The spacing between hill to hill in a row is …………. a.Inclined b. Not uniform d. None of the above

Last Answer : Ans - c. constant

It consists of dropping the seeds in furrow lines in a continuous stream and covering them with soil. The spacing between the seeds is not uniform. a. Dibbing c. Broadcasting d. None of the above.

Description : It consists of dropping the seeds in furrow lines in a continuous stream and covering them with soil. The spacing between the seeds is not uniform. a. Dibbing c. Broadcasting d. None of the above.

Last Answer : Ans - b. Drilling

In method, row to row and plant to plant distance is uniform. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Description : In method, row to row and plant to plant distance is uniform. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Check row planting

machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder

Description : machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder

Last Answer : Seed drill

Functions of seed drill machine . g. To carry the seeds h. To open furrow to an uniform depth i. To cover the seeds and compact the soil around the seed j. All of the above

Description : Functions of seed drill machine . g. To carry the seeds h. To open furrow to an uniform depth i. To cover the seeds and compact the soil around the seed j. All of the above

Last Answer : All of the above

method used for planting in row to row and plant to plant distance is uniform. c. Transplanting d. Hill dropping e. Check row planting f. Drilling

Description : method used for planting in row to row and plant to plant distance is uniform. c. Transplanting d. Hill dropping e. Check row planting f. Drilling

Last Answer : Check row planting

The method of planting in which row-to-row as well as plant-to-plant distance is uniform is: A. Drilling B. Hill dropping C. Check row planting D. All are correct

Description : The method of planting in which row-to-row as well as plant-to-plant distance is uniform is: A. Drilling B. Hill dropping C. Check row planting D. All are correct

Last Answer : Check row planting