Differentiate Between Herringbone Gears And Helical Gears?

Differentiate Between Herringbone Gears And Helical Gears?
by

1 Answer

Answer :

 Herringbone Gears . Double helical gears are known as Herringbone gears. These gears have teeth in series on both sides from the centre in the inclined position to the axis. These type of gears are used to transmit motion at high speed with heavy load without producing noise.
 Helical Gears. These type of gears have teeth in series of single way in an inclined position. Helical gears are used to transmit the motion at high speed without producing noise.
by

Related questions

The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°

Description : The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°

Last Answer : (A) 45°

ears commonly used on fuel injection pumps are a. Spur gears b. helical gears c. rack and pinion d. spiral gears

Description : ears commonly used on fuel injection pumps are a. Spur gears b. helical gears c. rack and pinion d. spiral gears

Last Answer : c. rack and pinion

Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears

Description : Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears

Last Answer : ∙ helical gear only

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

Maranta - Arrowroot Plant, Herringbone Plant, Prayer Plant, Rabbit Tracks (Maran'ta)

Description : Maranta - Arrowroot Plant, Herringbone Plant, Prayer Plant, Rabbit Tracks (Maran'ta)

Last Answer : DESCRIPTION: These frost tender perennials are native to tropical America and are grown for their beautiful foliage. They can be grown outside in frost-free climates only. Their leaves rise ... bicolor; M. leuconeura and its varieties are: kerchoveana, massangeana, erythroneura; M. arundinacea.

The main advantage of using worm gears is a.Low power loss b.High velocity ratio c.Ease of manufacture d.Minimum cost e.All of the above

Description : The main advantage of using worm gears is a.Low power loss b.High velocity ratio c.Ease of manufacture d.Minimum cost e.All of the above

Last Answer : c. Ease of manufacture

If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes

Description : If for power transmission a gear train consisting of 8 gears is used, then a.the motion of driver and follower will be in the same direction b.the motion of driver and follower will be in the opposite directions c.either of (A) or (B) above d.None of the above e.107 dynes

Last Answer : b. the motion of driver and follower will be in the opposite directions

If for power transmission a gear train consisting of 11 gears is used, then a.the motion of driver and follower will be in the same direction b.The motion of driver and follower will be in the opposite direction c.either of (A) or (B) above d.None of the above e.107 dynes

Description : If for power transmission a gear train consisting of 11 gears is used, then a.the motion of driver and follower will be in the same direction b.The motion of driver and follower will be in the opposite direction c.either of (A) or (B) above d.None of the above e.107 dynes

Last Answer : a. the motion of driver and follower will be in the same direction

Which Gears Are Used To Connect The Shafts At An Angle But Lying In The Same Plane?

Description : Which Gears Are Used To Connect The Shafts At An Angle But Lying In The Same Plane?

Last Answer :  Spiral gears  Worm and worm wheel

Which Gears Are Used To Connect The Shafts Which Intersect At Same Angle?

Description : Which Gears Are Used To Connect The Shafts Which Intersect At Same Angle?

Last Answer : Bevel gears and angle gears.

Which Gears Are Used To Connect The Shafts Lying In The Same Plane?

Description : Which Gears Are Used To Connect The Shafts Lying In The Same Plane?

Last Answer : Spur gears, Helical gears, Internal gears and Herringbone gears

What Are The Functions Of Gears?

Description : What Are The Functions Of Gears?

Last Answer :  To change the direction of rotation  To change the speed.  To change the plane directions.  To transmit power.  To give positive drive.

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2.gears and belt pulleys 3. belt pulleys and chains 4 none of the above

Last Answer : ans 2

This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Axial flow

Sweep consist of. shaped shovels with bevel edged wings. b. W c. Helical d. None of above

Description : Sweep consist of. shaped shovels with bevel edged wings. b. W c. Helical d. None of above

Last Answer : Ans- a. v

Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above

Description : Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above

Last Answer : Ans- b. serrated projection

This type of Cultivator suitable to work in hard and stony soils. a. Fixed tooth c. Helical tooth d. None of the above

Description : This type of Cultivator suitable to work in hard and stony soils. a. Fixed tooth c. Helical tooth d. None of the above

Last Answer : Ans - b. Spring tooth

Cultivator has tines or disc to work between crop row. a. Fixed c. Helical d. None of the above.

Description : Cultivator has tines or disc to work between crop row. a. Fixed c. Helical d. None of the above.

Last Answer : Ans - b. adjustable

Ridger generally has shaped share fitted to the frog. a. Flat b. c. Helical d. None of the above.

Description : Ridger generally has shaped share fitted to the frog. a. Flat b. c. Helical d. None of the above.

Last Answer : Ans - b. V or wedge

t consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Last Answer : Axial flow type

Differentiate Between The Uniform Flow And Non-uniform Flow?

Description : Differentiate Between The Uniform Flow And Non-uniform Flow?

Last Answer : Uniform Flow: The flow is defined as uniform flow when in the flow field the velocity and other hydrodynamic parameters do not change from point to point at any instant of time. Non-Uniform ... other hydrodynamic parameters changes from one point to another the flow is dened as non-uniform flow.

What grinds your gears?

Description : What grinds your gears?

Last Answer : answer:I don't rant to anybody about anything. For the most part, my opinion is if you have something you feel strongly about, I'm not going to argue with you about it, as I wouldn't expect you to ... long as we can all get along and be respectful of each other's space and needs, that's good enough.

Working with small plastic gears?

Description : Working with small plastic gears?

Last Answer : answer:As long as all the gears will mesh, it's just a matter of counting teeth. For a simple example, if one gear has 10 teeth and a second has 20, then you have a 2/1 or ½ gear ratio ... motor running accurately at 6,000 RPM and a set of gears that reduces that speed by a factor of 6000/1.

Homework question about gears.

Description : Homework question about gears.

Last Answer : answer:I think you're missing some information. In order to fin the output torque you'll need some information about the forces on the input. The angular velocity on the input gear is not enough ... the actual wording of the problem? Post that maybe there's some unobvious reference to input force.

Would the transition from a multiple-gear (10/14/21 gears) bike to a single-speed/fixed-speed one be difficult?

Description : Would the transition from a multiple-gear (10/14/21 gears) bike to a single-speed/fixed-speed one be difficult?

Last Answer : It would not be too hard if you’re handy. But my unsolicited opinion is fixed gear bikes are lame for most purposes, and are currently trendy things white people like.

Why do my car's gears keeping sticking?

Description : Why do my car's gears keeping sticking?

Last Answer : answer:Quoted from the Complete Car Care Manual by Popular Mechanics: Does the harsh shifting occur only in one gear change ? The accumulator is something to suspect on fully hydraulic and partly electronic ... located, and© how to get at and clean both of these, if they do need cleaning.

What really grinds your gears?

Description : What really grinds your gears?

Last Answer : Cigarette butts scattered about at the playground. lazy fu#ks

Why does the blood in gears of war 2 make so awsome?

Description : Why does the blood in gears of war 2 make so awsome?

Last Answer : its the sheer satisfaction that you risked life and limb getting so close to someone to chainsaw them, its your only solace and reward. Pure happiness.

Any fans of Gears of War for the XBox 360?

Description : Any fans of Gears of War for the XBox 360?

Last Answer : I used to be a huge GoW fan, but I’ve moved on to Mass Effect and now CoD4. I can’t wait for the new Vegas to come out, though.

How do you change gears on a bike?

Description : How do you change gears on a bike?

Last Answer : Change gears while you’re in motion. I don’t know if you’re already doing this or not, but if you aren’t you should.

Can the gears on my bicycle be fixed?

Description : Can the gears on my bicycle be fixed?

Last Answer : This problem should be fixed easily. There should be a barrel adjuster that you can turn on the cable that attaches to the rear derailleur. Just give that a turn and you should be in good shape. Adjust as necessary until it is shifting properly.

What are some problems with the new Iphone 3G that you have experienced that just "Grinds your gears"?

Description : What are some problems with the new Iphone 3G that you have experienced that just "Grinds your gears"?

Last Answer : answer:Random OS crashes when updating App Store apps; what happens is in the middle of an update, the iPhone suddenly reboots, only to become frozen on the startup white apple logo. ... really poor battery life from poor power management, apparently from the radios switching between 3G and EDGE.

What really grinds your gears?

Description : What really grinds your gears?

Last Answer : Failed synchromesh

What really grinds your gears?

Description : What really grinds your gears?

Last Answer : when people chew with their mouth open.

What was weapon choice nearly cut from “Gears of War” over creative differences? -Gaming

Description : What was weapon choice nearly cut from “Gears of War” over creative differences? -Gaming

Last Answer : answer. The Chainsaw Gun.

What is the name of the planet that is home to the game “Gears of War?” -Gaming

Description : What is the name of the planet that is home to the game “Gears of War?” -Gaming

Last Answer : Game of gears was take place in sera. So, Sera is the planet which is home

How to clean Chemically clean the inside gears of a Bernina sewing machine.

Description : How to clean Chemically clean the inside gears of a Bernina sewing machine.

Last Answer : Need Answer

Now that the gears of your brain are oiled, and working let us move on to the best and hardest math trivia questions. These quiz questions will test your calculation skills and just how good you are with numbers. Remember, no calculators are allowed during this round. Find the answer to these trivia questions as quickly as you can to be crowned the Math King among your friends and family.

Description : Now that the gears of your brain are oiled, and working let us move on to the best and hardest math trivia questions. These quiz questions will test your calculation skills and just how good you ... trivia questions as quickly as you can to be crowned the Math King among your friends and family.

Last Answer : Was 2014 a leap year?

Aside from Dick's sporting goods, what are other sporting goods stores carry hunting gears and outdoor apparels?

Description : Aside from Dick's sporting goods, what are other sporting goods stores carry hunting gears and outdoor apparels?

Last Answer : There are quite a few brands that are at the top for hunting gears and clothing other than Dcks sporting goods. A few other top brands in the field of hunting are Basspro, Cabella, and ... other top brands in the hunting clothing industry. Hope this helps people in finding the best hunting gear.

Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Last Answer : (B) Flanges

Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Description : Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Last Answer : (B) Are used for automobile parts like gears, axle, shaft, bearings etc

If the centre distance of the mating gears having involute teeth is varied within limits, the velocity ratio (A) Increases (B) Decreases (C) Remains unchanged (D) None of these

Description : If the centre distance of the mating gears having involute teeth is varied within limits, the velocity ratio (A) Increases (B) Decreases (C) Remains unchanged (D) None of these

Last Answer : (C) Remains unchanged

Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives

Last Answer : a) gears

Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane

Description : Worm gears are used for transmitting power between two shafts a)at right angle to each other and cannot intersect each other b) at right angle to each other and can intersect each other c)at angle to each other d)shafts on different plane

Last Answer : a)at right angle to each other and cannot intersect each other

Gears are used for: a)changing the speed rotation b)changing direction of rotation c)changing direction of shafting d)all of the above

Description : Gears are used for: a)changing the speed rotation b)changing direction of rotation c)changing direction of shafting d)all of the above

Last Answer : d)all of the above

The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Description : The commonly used power transmission system in ferti seed drills are: a) China-sprocket and gears b) Gears and belt pulleys c) Belt pulleys and cams d) Belt pulleys and chain sprocket

Last Answer : d) Belt pulleys and chain sprocket

In an epicycle gear reduction unit, the ratio of the number of teeth of the internal gears to the sun gear is: a) 3:1 b) 4:1 c) 2.5:1 d) 4.5:1

Description : In an epicycle gear reduction unit, the ratio of the number of teeth of the internal gears to the sun gear is: a) 3:1 b) 4:1 c) 2.5:1 d) 4.5:1

Last Answer : b) 4:1

L. A. Gear's sports shoe line would have been classified as a problem child when it was introduced. Based on this classification, which of the following would have been true according to the product -portfolio matrix? A)High profitability B)High market growth rate C)High market share D)Positive cash flow E)Relatively high sales volume

Description : L. A. Gear's sports shoe line would have been classified as a problem child when it was introduced. Based on this classification, which of the following would have been true according to the ... B)High market growth rate C)High market share D)Positive cash flow E)Relatively high sales volume

Last Answer : B)High market growth rate

A ____ pump consists of a reciprocating or rotating cavity between two lobes or gears and a rotor. a. positive c. negative b. centrifugal d. hand

Description : A ____ pump consists of a reciprocating or rotating cavity between two lobes or gears and a rotor. a. positive c. negative b. centrifugal d. hand

Last Answer : a. positive

How to Shift Gears in a Car ?

Description : How to Shift Gears in a Car ?

Last Answer : How to Shift Gears in a Car Driving a shift stick offers many benefits especially for drivers who don't like monotony on the road. First-timers are recommended to practice driving using a shift stick ... If you enjoy learning this article, you'll surely be delighted in reading how to learn driving.