If You Have A New Bearing That Has Been Used, But Is Pretty Dirty, What Can You Do To Use It Again?

If You Have A New Bearing That Has Been Used, But Is Pretty Dirty, What Can You Do To Use It Again?
by

1 Answer

Answer :

Hand wash, and try not to spin it. Never wash double shield bearings, only wipe them off then apply lubricant before wrapping and storing.
by

Related questions

If My Work Space Is Dirty, How Can I Take Care To Install A New Bearing Without Messing It Up From The Git-go?

Description : If My Work Space Is Dirty, How Can I Take Care To Install A New Bearing Without Messing It Up From The Git-go?

Last Answer : It's understandable, after you've taken the time and care to properly store your bearings, that you would want to be sure to install them in a clean environment. But, that's tricky. Clean ... early failure. And, remember bearings should not be washed, except for oil mist or circulating oil system.

Has this been you? You're normally a confident person, then something happens in your life and it shakes your confidence (temporarily). It hits you pretty hard and you have to build yourself back up again (maybe, through self talk)?

Description : Has this been you? You're normally a confident person, then something happens in your life and it shakes your confidence (temporarily). It hits you pretty hard and you have to build yourself back up again (maybe, through self talk)?

Last Answer : Break ups do that to me.

What is the best way to get dirty white socks really white again?

Description : What is the best way to get dirty white socks really white again?

Last Answer : Uh…bleach?

What Is Journal Bearing And Mention Its Use?

Description : What Is Journal Bearing And Mention Its Use?

Last Answer : It is a split bearing having two halves which are made of brass, gun metal, etc. Its outer ends have collar on both sides. IT is fitted in the housing generally made of cast iron. It is used where the supporting pressure of the bearing is at right angle to the shaft axis.

What Is The Use Of Taper Roller Bearing?

Description : What Is The Use Of Taper Roller Bearing?

Last Answer : A taper roller bearing is used to carry heavy loads because it has taper rollers instead of plain cylindrical rollers.

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing

Description : Moment of Inertia of triangular section about an axis passing through its base is given by a.bh3/12 b.bh3/32 c.bh3/36 d.None of the above e.Tapered bearing

Last Answer : a. bh3/12

A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Description : A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing

Last Answer : b. 80N

A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Description : A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing

Last Answer : a. 500 KJ

Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Description : Power required for a train weighing 200 Mg to move at a uniform speed of 60 Kmph up an incline of 1 in 200 is (Resistance due to friction is negligible) a.16.67 KW b.163.5 KW c.1000 KW d.9810 KW e.Tapered bearing

Last Answer : b. 163.5 KW

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Description : Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing

Last Answer : d. None of the above

M.I. of sphere of 0.5 m radius about a mutually perpendicular axis (Z-axis) when its M.I. about X-axis and Y-axis are 50 kgm2 and 50 kgm2 is a.50 Kgm2 b.Tapered bearing c.100 Kgm2 d.25 Kgm2 e.12.5 Kgm2

Description : M.I. of sphere of 0.5 m radius about a mutually perpendicular axis (Z-axis) when its M.I. about X-axis and Y-axis are 50 kgm2 and 50 kgm2 is a.50 Kgm2 b.Tapered bearing c.100 Kgm2 d.25 Kgm2 e.12.5 Kgm2

Last Answer : a. 50 Kgm2

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

What Are The Advantages Of Anti-friction Bearing Over A Friction Bearing?

Description : What Are The Advantages Of Anti-friction Bearing Over A Friction Bearing?

Last Answer :  For reducing wear and tear.  For saving the power consumption.  For easy setup.  For smooth running of machine.  For running at slow and high speed carrying light and heavy loads.

What Is The Application Of White Metal Bearing?

Description : What Is The Application Of White Metal Bearing?

Last Answer : It is generally used on high speed with light load because its bearing metal controls the heat.

What Are The Functions Of A Bearing?

Description : What Are The Functions Of A Bearing?

Last Answer :  To guide the shaft.  To support the shaft.  To give free rotation to the shaft.

Why Is The Bearing Tinned Before Refilling?

Description : Why Is The Bearing Tinned Before Refilling?

Last Answer : While removing the damaged lining it helps to melt the lining at low temperature and it helps to spread over the molten metal on the bearing surface.

What Does Bearing Service Manufacture?

Description : What Does Bearing Service Manufacture?

Last Answer : Bearing Service is a distributor. We do not manufacture the products we sell, but our shops can machine, fabricate, and customize a variety of products to meet your maintenance needs.

Will A Stainless Steel Bearing Protect Against Rust?

Description : Will A Stainless Steel Bearing Protect Against Rust?

Last Answer : Not to the extent you might think. Stainless steel is not rust proof. It is corrosion resistant and will rust in corrosive environments over time, but at a much slower rate than chrome alloy steel.

How Can I Determine If A Bearing Is Failing?

Description : How Can I Determine If A Bearing Is Failing?

Last Answer : Three main indicators – excessive noise, heat, and/or vibration. If these are present more than expected, you can be pretty certain that a bearings is failing.

Can Seals Be Used In Place Of Shields On A Ball Bearing?

Description : Can Seals Be Used In Place Of Shields On A Ball Bearing?

Last Answer : Not if you want to avoid problems. A shield provides a clearance between the inner and outer race, whereas a seal is attached to the inner race and could cause problems rubbing on the inner race, depending on the speed, heat, and starting torque of the machine.

What Is A Combination Thrust And Radial Bearing?

Description : What Is A Combination Thrust And Radial Bearing?

Last Answer : This unit has the ends of the Babbitt bearing extended radically over the end of the shell. Collars on the rotor face these thrust pads, and the journal is supported in the bearing between the thrust collars.

What Is The Function Of A Thrust Bearing?

Description : What Is The Function Of A Thrust Bearing?

Last Answer : Thrust bearings keep the rotor in its correct axial position.

is a circular concave revolving steel plate using for cutting and inverting the soil. a. Gang bolt. c. Disc b. Bearing d. None

Description : is a circular concave revolving steel plate using for cutting and inverting the soil. a. Gang bolt. c. Disc b. Bearing d. None

Last Answer : Bearing 

is essential to counter act the and thrust of gang due to soil thrust. a. Gang c. Spacer b. Bearing. d. Gang bolt

Description : is essential to counter act the and thrust of gang due to soil thrust. a. Gang c. Spacer b. Bearing. d. Gang bolt

Last Answer : Bearing.

The flanked tube mounted on the gang bold between every two disc to prevent the lateral movement of the disc on the shaft is called............ a. Bearing. c. Gang bolt b. Gang. d. Spool

Description : The flanked tube mounted on the gang bold between every two disc to prevent the lateral movement of the disc on the shaft is called............ a. Bearing. c. Gang bolt b. Gang. d. Spool

Last Answer : Spool

A lever, which operates the gang mechanism of the disk harrow, is called the i. Spanners lever. c) spacer lever ii. Gang control lever. d) Bearing lever

Description : A lever, which operates the gang mechanism of the disk harrow, is called the i. Spanners lever. c) spacer lever ii. Gang control lever. d) Bearing lever

Last Answer : Gang control lever

Each set of discs that are mounted on a common shaft is called as i. Spool. c) Bearing ii. Gang. d) Gang control

Description : Each set of discs that are mounted on a common shaft is called as i. Spool. c) Bearing ii. Gang. d) Gang control

Last Answer : Gang

is essential to counter act the end thrust of gang due to soil thrust.. A) Spool. C ) Gang B) Bearing. D) Gang bolt

Description : is essential to counter act the end thrust of gang due to soil thrust.. A) Spool. C ) Gang B) Bearing. D) Gang bolt

Last Answer : Bearing

The lateral movement of disc on shaft is called as A) Spool. C) Gang B) Bearing D) Gear

Description : The lateral movement of disc on shaft is called as A) Spool. C) Gang B) Bearing D) Gear

Last Answer : Spool

I was born in the 18th century, yet still live on today. Appearing on TV when I have something to say. Called everything from 'honest' to a dirty rotten 'crook', I used to wear a wig, but have had several looks. I've always had a party, but never disturb the neighbors. I've been shot at many times - major stories for the papers. What am I? -Riddles

Description : I was born in the 18th century, yet still live on today. Appearing on TV when I have something to say. Called everything from 'honest' to a dirty rotten 'crook', I used to wear a wig, but have ... the neighbors. I've been shot at many times - major stories for the papers. What am I? -Riddles

Last Answer : The Office of the President of the United States.

The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as  a. sublimation  b. condensation  c. deposition  d. regelation

Description : The phenomenon of melting under pressure and freezing again when the pressure is reduced is known as  a. sublimation  b. condensation  c. deposition  d. regelation

Last Answer : regelation

What do you do with clothes that have been worn once been aren't dirty enough to wash yet?

Description : What do you do with clothes that have been worn once been aren't dirty enough to wash yet?

Last Answer : The only clothes I wear which go under your category are jeans. I wear them out once, then decide that washing them after just one session out is a complete waste of water and detergent. But ... been soiled by the outside environment yet. So I usually just fold the jeans and chuck them somewhere.

What are some questions that we can be pretty sure have never been asked on a Q&A website before?

Description : What are some questions that we can be pretty sure have never been asked on a Q&A website before?

Last Answer : If I asked them, then those questions will have been asked, thereby taking away their mystqiue and uniqueness.

Remember TGIF on ABC from the 90's? How come pretty much every show except Family Matters has been released on DVD?

Description : Remember TGIF on ABC from the 90's? How come pretty much every show except Family Matters has been released on DVD?

Last Answer : I can’t give you an answer because I don’t know. What I do know is, you just brought back a bunch of good memories. Thanks.

margo plants are dying, they have been so pretty what can i do to save them

Description : margo plants are dying, they have been so pretty what can i do to save them

Last Answer : Need Answer

[SFW] It's dirty work, but somebody's got to I will do it.

Description : [SFW] It's dirty work, but somebody's got to I will do it.

Last Answer : answer:A few weeks back, my friend asked if I could come over and help her bathe her older, arthritic doggy. I often babysit her 2 dogs, so of course I said yes. Because of his arthritis, he's not ... over and trim him again before his hair got as long as it was before. It's much easier that way.

I'm looking for the "Dirty Dozen" and the "Clean Fifteen" Many websites refer to it, but I can't find the government link. Help?

Description : I'm looking for the "Dirty Dozen" and the "Clean Fifteen" Many websites refer to it, but I can't find the government link. Help?

Last Answer : answer:http://www.ewg.org/foodnews/ Looks like it a privately published listing.

Can you help me understand why so many people are obsessed with anti-bacterials and hand sanitizers for hands, but find it ok to put their dirty body in bed without showering?

Description : Can you help me understand why so many people are obsessed with anti-bacterials and hand sanitizers for hands, but find it ok to put their dirty body in bed without showering?

Last Answer : hm, that is pretty gnarly.

What words are fine when used as nouns but kind of (or absolutely) dirty when used as verbs?

Description : What words are fine when used as nouns but kind of (or absolutely) dirty when used as verbs?

Last Answer : Slam.

Is there an online map Web site that allows you to plot several points/add specific information? I know there is software that does this but want something quick, dirty, and online.

Description : Is there an online map Web site that allows you to plot several points/add specific information? I know there is software that does this but want something quick, dirty, and online.

Last Answer : There’s always Google Maps. That’s where the Fluther map is, and lots of people plot points and specific information on it.

Hidden in the poem below, a female's name you'll seek; just read and listen to the rhyme, but please, don't take a week! MYSTERY POEM: A pig that is not dirty, I might just one day see; but pigs and soap suds do not mix, in bathtub history! What is the female name you hear? -Riddles

Description : Hidden in the poem below, a female's name you'll seek; just read and listen to the rhyme, but please, don't take a week! MYSTERY POEM: A pig that is not dirty, I might just one day see; but pigs and soap suds do not mix, in bathtub history! What is the female name you hear? -Riddles

Last Answer : DAISY.

What cleans but never ever gets dirty? -Riddles

Description : What cleans but never ever gets dirty? -Riddles

Last Answer : A bar of soap.

I have hundreds of legs but I can only lean;You make me feel dirty so you feel clean.What am I? -Riddles

Description : I have hundreds of legs but I can only lean;You make me feel dirty so you feel clean.What am I? -Riddles

Last Answer : A Broom.

I have a big mouth and I am also quite loud! I am NOT a gossip but I do get involved with everyone's dirty business. What am I? -Riddles

Description : I have a big mouth and I am also quite loud! I am NOT a gossip but I do get involved with everyone's dirty business. What am I? -Riddles

Last Answer : A Vacuum Cleaner.

My hardwood floors are very very dirty how can I clean them natural but good?

Description : My hardwood floors are very very dirty how can I clean them natural but good?

Last Answer : Things You'll Need Bucket Soapy water Old cloths/rags Mineral spirits Proprietary wood cleaner Wax and wax remover (optional) Denatured alcohol and paint remover (optional) Ice (optional) ... and drying times. Read more: http://www.ehow.com/how_5130806_clean-dirty-hardwood-floors.html#ixzz2gYNcOURW

If a D.C. motor hums, but does not run when energized, which of the listed conditions could exist? A. Incorrect lead connections B. Incorrect brush setting C. A dirty commutator D. All of the above are correct.

Description : If a D.C. motor hums, but does not run when energized, which of the listed conditions could exist? A. Incorrect lead connections B. Incorrect brush setting C. A dirty commutator D. All of the above are correct.

Last Answer : Answer: D

The motor starts when the start button in the illustration is pushed, but stops when the button is released the trouble is _________. EL-0007 A. the incorrect thermal overload coil B. a faulty 'M' coil C. a dirty contact on the Disc.Sw. at 'L3' D. a faulty holding relay contact

Description : The motor starts when the start button in the illustration is pushed, but stops when the button is released the trouble is _________. EL-0007 A. the incorrect thermal overload coil B. a faulty 'M' coil C. a dirty contact on the Disc.Sw. at 'L3' D. a faulty holding relay contact

Last Answer : Answer: D