Ans - b. V or wedge
Description : The ridger generally has shaped shares fitted to the frog . A V shaped C U shaped B Both A and C D None of the these
Last Answer : V shaped
Description : The ridger has—- Shaped or —— shaped share fitted to the frog A. V, Wedge. C. U, wedge B. None of the above D. Both A and C
Last Answer : Both A and C
Description : The valve fitted closely in a recess against an opening in a pipe, is generally (A) Wedge shaped circular disc (B) Spherical disc (C) Parallelepiped disc (D) Conical shaped circular disc
Last Answer : (A) Wedge shaped circular disc
Description : Sweep consist of. shaped shovels with bevel edged wings. b. W c. Helical d. None of above
Last Answer : Ans- a. v
Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow
Last Answer : ans 1
Description : Ridger is also known as riding plough and moulds board plough. a. Single c. Half d. None of the above. Ans - b. Double
Last Answer : Ans - b. Double
Description : Harrow, patella, Guntaka, Bund former, Ridger, Puddler, leveller and cultivator are the tillage implements. a. Primary c. post d. None of the above
Last Answer : Ans - b. Secondary
Description : Blade harrow is also named as i. Guntaka. c) Ridger ii. Bakhar. d) Bund
Last Answer : Bakhar
Description : —— is important for churning of the soil with water A. Levelers. C. Bunds B. Ridger. D. Puddler
Last Answer : Puddler
Description : The is also used for forming field or channels. A. Bunds. C. Ridger B. Harrow. D. None of the above.
Last Answer : Ridger
Description : are used to hold water in the soil. A. Bunds. C. Harrow B. Ridger. D. None of the above
Last Answer : Bunds
Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow
Last Answer : One way MB plough
Description : it‘s consists of former board , beam and handle. A. Ridger. C Cultivator B. Puddler. D Bund former
Description : is known as ridging plough and double mould board plough. A. Bund former. C Puddler B. Leveller. D Ridger
Description : is used for making bunds or ridges by collecting the soil . A) Ridger C leveller B) puddler D Bund former
Last Answer : Bund former
Description : Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above
Last Answer : Ans- c. back.
Description : Which one of the following is an accessory to mould board plough? a. Share b. mould board c. frog
Last Answer : <!-- [endif] --> Ans- d. jointer
Description : component is penetrates into soil and make a horizontal cut below the soil surface. a) Frog b) Land side c) Share d) None
Last Answer : Share
Description : The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB
Last Answer : Share, landside , frog and Mb
Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine
Last Answer : (B) Helical screw
Description : This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above
Last Answer : Ans- a. Syndicator
Description : To avoid large centering error with very short legs, observations are generally made (A) To chain pins (B) By using optical system for centering the theodolite (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily (D) All the above
Last Answer : (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily
Description : tractors are generally fitted with: A)sliding mesh gear box B)constant mesh gear box C)both (a) & (b) D)synchromesh gear box
Last Answer : A)sliding mesh gear box
Description : Differentiate Between Herringbone Gears And Helical Gears?
Last Answer : Herringbone Gears . Double helical gears are known as Herringbone gears. These gears have teeth in series on both sides from the centre in the inclined position to the axis. These type of ... an inclined position. Helical gears are used to transmit the motion at high speed without producing noise.
Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above
Last Answer : Ans- b. Axial flow
Description : Cono weeder consist of conical rollers have on the periphery. a. Helical projection c. Interrupted projection d. None of above
Last Answer : Ans- b. serrated projection
Description : This type of Cultivator suitable to work in hard and stony soils. a. Fixed tooth c. Helical tooth d. None of the above
Last Answer : Ans - b. Spring tooth
Description : Cultivator has tines or disc to work between crop row. a. Fixed c. Helical d. None of the above.
Last Answer : Ans - b. adjustable
Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type
Last Answer : Axial flow type
Description : Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears
Last Answer : ∙ helical gear only
Description : Dead furrow is made by: a. One way MB plough b. Two way MB plough c. Ridger d. Disc harrow
Last Answer : a. One way MB plough
Description : Use of multiple notches in a V shaped flat plate will a) Reduce the stress concentration b) Increase the stress concentration c) No effect d) Cannot be determined
Last Answer : a) Reduce the stress concentration
Description : Match the columns and identify the correct option. Column I Column II A. Thylakoids (i) Disc-shaped sacs in Golgi apparatus B. Cristae (ii) Condensed structure of DNA C. Cisternae (iii) Flat membranous sacs in stroma D. Chromatin (iv) ... iii), C-(i), D-(ii) (d) A-(iii), B-(iv), C-(i), D-(ii)
Last Answer : (d) A-(iii), B-(iv), C-(i), D-(ii)
Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side
Last Answer : Answer: Option B
Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section
Last Answer : <!-- [endif] -->Knife Section
Description : it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.
Last Answer : Spike tooth harrow
Description : The first hyperboloid shaped cooling tower was introduced by the Dutch engineers Frederik van Iterson andGerard Kuypers and built in ……….. a) 1918 c) 1919 b) 1870 d) 1920
Last Answer : 1918
Description : (i) What is Star shaped pattern of settlement ? Name a state in India where this pattern of settlement is generally found. -Geography
Last Answer : (i) When streets emerge from a common center, a Star-shaped pattern of settlement takes place. Tamil Nadu is an example of this type of settlement. (ii) The Slum Act of 1956 ... lack of ventilation, poor sanitary facilities, all conspiring to promote slum life which defies health and morals.
Description : The Valleys of Peninsular India are generally (a) U-Shaped (b) V-Shaped (c) Deep (d) Not so deep
Last Answer : Ans: (a)
Description : For trunk and out-fall, the type of sewers generally used, is A. Standard egg shaped B. Circular shaped C. Horse shoe shaped D. Parabolic shaped
Last Answer : ANS: C
Description : Multicore cables generally use (a) square conductors (b) circular conductors (c) rectangular conductors (d) sector-shaped conductors (e) none of the above
Last Answer : (d) sector-shaped conductors
Description : On my own, I am darkness, a black abyss. But, Life brings me light with its gentle kiss. I am quiet and cold, but warmth I can hold. Alongside beauties and wonders, sights to be told. My surface may ... earth I have come, and forever will stay, even if parts of me crumble away. What am I? -Riddles
Last Answer : A cave.
Description : A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray
Last Answer : ans d
Description : is used to transmit power from the engine to the main clutch. A. V-Belt C. open belt drive B. cross belt D. flat belt
Last Answer : V-Belt
Description : A small solid elevation of the skin, generally defined as less than 5mm, maybe flat or domeshaped. A. Nodule B. Papule C. Macule
Last Answer : Ans: B
Description : Subtense tacheometry is generally preferred to if ground is (A) Flat (B) Undulating (C) Mountainous (D) Deserts
Last Answer : (B) Undulating
Description : The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column
Last Answer : Option A
Description : Pick out the wrong statement. (A) A soft magnetic material should have high permeability and small area of hysteresis loop (B) Poisson's ratio of high melting point metals is more than unity (C) ... less than 185°C (D) Steel produced by B.O.F process is ideally suited for manufacturing flat product
Last Answer : Option B
Description : The type of arch generally constructed over a wooden lintel or over a flat arch for the purpose of carrying the load of the wall above is (A) Segmental arch (B) Pointed arch (C) Relieving arch (D) Flat arch
Last Answer : Option C
Description : A market share pricing objective A)is not recommended when sales for the total industry are declining. B)is not especially useful when sales for the total industry are increasing. C)is not ... industry are flat. D)can be used effectively whether total industry sales are rising or falling.
Last Answer : D)can be used effectively whether total industry sales are rising or falling.