Pick up the correct specification of one-room quarters generally adopted from the following: (A) Six quarters in a row (B) The size of room is either 3.5 m × 3 m or 4.2 m × 2.5 m (C) The front verandah is kept 2 m wide (D) All the above

Pick up the correct specification of one-room quarters generally adopted from the following:
(A) Six quarters in a row
(B) The size of room is either 3.5 m × 3 m or 4.2 m × 2.5 m
(C) The front verandah is kept 2 m wide
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Pick up the correct specification of Ramsden eyepiece from the following: (A) It consists of two equal piano convex lenses (B) The curved surfaces of Plano-convex lenses face each other (C) The distance between the diaphragm and the front lens of the eyepiece is kept equal to 1/4 th of the focal length of a lens so that rays from a point on the diaphragm enter the eye as a parallel beam (D) All the above

Description : Pick up the correct specification of Ramsden eyepiece from the following:  (A) It consists of two equal piano convex lenses  (B) The curved surfaces of Plano-convex lenses face each other  (C) ... from a point on the diaphragm enter the eye as a  parallel beam  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Description : Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Last Answer : Answer: Option D

Which one of the following factors is considered for the orientation of buildings? (A) The direction of the prevailing winds in the area (B) The exposure of the walls and roof of the buildings to the rays of sun (C) The extent up to which the sunrays penetrate with the verandah (D) All the above

Description : Which one of the following factors is considered for the orientation of buildings? (A) The direction of the prevailing winds in the area (B) The exposure of the walls and roof of the buildings to the rays of sun (C) The extent up to which the sunrays penetrate with the verandah (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Spring tides are caused at new and full moon (B) Neap tides are caused when the moon is in her quarters (C) Spring tides are roughly twice the height of neap tides (D) All of the abov

Description : Pick up the correct statement from the following: (A) Spring tides are caused at new and full moon (B) Neap tides are caused when the moon is in her quarters (C) Spring tides are roughly twice the height of neap tides (D) All of the abov

Last Answer : (D) All of the above

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Central portion of a cyclone acts as a chimney through which air gets lifted (B) Cyclonic precipitation caused by a warm front is generally continuous (C) Greatest amount of orographic precipitation falls in the windward side of the barrier (D) All the above

Description : Pick up the correct statement from the following: (A) Central portion of a cyclone acts as a chimney through which air gets lifted (B) Cyclonic precipitation caused by a warm front is ... Greatest amount of orographic precipitation falls in the windward side of the barrier (D) All the above

Last Answer : Option D

In verandah floors outward slope is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70

Description : In verandah floors outward slope is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70

Last Answer : Answer: Option C

Dado is usually provided in (A) Dining halls (B) Bath rooms (C) Living rooms (D) Verandah

Description : Dado is usually provided in (A) Dining halls (B) Bath rooms (C) Living rooms (D) Verandah

Last Answer : Answer: Option B

Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug out whose size is kept equal to the size of the test plate (C) Bottom level of the hole dug at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Description : Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug ... at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Louvered door is generally provided in bath rooms (B) Flush door is generally provided in dining room (C) Revolving door is generally provided in cinema halls (D) Sliding door is generally provided in show rooms

Description : Pick up the correct statement from the following: (A) Louvered door is generally provided in bath rooms (B) Flush door is generally provided in dining room (C) Revolving door is generally provided in cinema halls (D) Sliding door is generally provided in show rooms

Last Answer : Answer: Option C

If you get an opportunity to teach a visually challenged student along with normal students, what type of treatment would you like to give him in the class ? (A) Not giving extra attention because majority may suffer. (B) Take care of him sympathetically in the class- room. (C) You will think that blindness is his destiny and hence you cannot do anything. (D) Arrange a seat in the front row and try to teach at a pace convenient to him.

Description : If you get an opportunity to teach a visually challenged student along with normal students, what type of treatment would you like to give him in the class ? (A) Not giving extra attention because majority may ... (D) Arrange a seat in the front row and try to teach at a pace convenient to him.

Last Answer : (D) Arrange a seat in the front row and try to teach at a pace convenient to him.

If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Last Answer : Answer: Option B

For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Description : For a 6.6 m wide two lane pavement, berms are provided on either side having a width of (A) 1.00 m (B) 1.25 m (C) 1.50 m (D) 1.75 m

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Safety fences are provided on either side of a roadway if embankments are in excess of 6 metres (B) Safety fences are provided on outside of the curves of radii less than 750 m if the embankments are between 3 metres and 6 metres (C) Guard stones are provided at 2.5 metres intervals if embankments are between 1.6 metres to 3 metres (D) All the above

Description : Pick up the correct statement from the following: (A) Safety fences are provided on either side of a roadway if embankments are in excess of 6 metres (B) Safety fences are provided on outside of the ... 2.5 metres intervals if embankments are between 1.6 metres to 3 metres (D) All the above

Last Answer : Answer: Option D

The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is kept (A) At the level of water of the source (B) At the bottom of water of the source (C) At about 2.5 m above the bottom (D) None of these

Description : The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is  kept  (A) At the level of water of the source  (B) At the bottom of water of the source  (C) At about 2.5 m above the bottom  (D) None of these 

Last Answer : (C) At about 2.5 m above the bottom 

The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is kept (A) At the level of water of the source (B) At the bottom of water of the source (C) At about 2.5 m above the bottom (D) None of these

Description : The intake opening is generally covered by a screen to prevent entry of debris etc. and its level is kept (A) At the level of water of the source (B) At the bottom of water of the source (C) At about 2.5 m above the bottom (D) None of these

Last Answer : (C) At about 2.5 m above the bottom

Depth of reinforcement below the surface of a concrete pavement, is generally kept (A) 5 cm (B) 6 cm (C) 7 m (D) 9 m

Description : Depth of reinforcement below the surface of a concrete pavement, is generally kept (A) 5 cm (B) 6 cm (C) 7 m (D) 9 m

Last Answer : Answer: Option A

The size of mould for bricks, is generally kept (A) A little large to specified size (B) A little small to specified size (C) Equal to specified size (D) 10% larger than specified size

Description : The size of mould for bricks, is generally kept (A) A little large to specified size (B) A little small to specified size (C) Equal to specified size (D) 10% larger than specified size

Last Answer : Answer: Option A

Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/cm2 (C) The water at pressure 1 to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Description : Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/ ... to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Last Answer : (D) None of these

Pickup the incorrect statement from the following: (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line (B) The pressure conduits may be taken uphill upto a maximum height of 8.3 m (C) Aqueducts and tunnels sections are generally kept circular (D) None of these

Description : Pickup the incorrect statement from the following:  (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line  (B) The pressure conduits may be taken uphill ... m  (C) Aqueducts and tunnels sections are generally kept circular  (D) None of these 

Last Answer : (D) None of these 

The radius of curvature of the arc of the bubble tube is generally kept (A) 10 m (B) 25 m (C) 50 m (D) 100 m

Description : The radius of curvature of the arc of the bubble tube is generally kept (A) 10 m (B) 25 m (C) 50 m (D) 100 m

Last Answer : (D) 100 m

Depth of borings for soil investigation, is generally kept below low water level (A) 30 m (B) 35 m (C) 45 m (D) 40 m

Description : Depth of borings for soil investigation, is generally kept below low water level (A) 30 m (B) 35 m (C) 45 m (D) 40 m

Last Answer : (C) 45 m

Pick up the correct statement from the following: (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours (B) Detention period for sedimentation tanks, using coagulants usually ranges between 2 to 4 hours(C) The horizontally flow velocity in sedimentation tanks, is generally limited to 0.3 m/minute (D) All the above

Description : Pick up the correct statement from the following:  (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours  (B) Detention period for sedimentation tanks, using coagulants usually ... in sedimentation tanks, is generally limited to 0.3 m/minute  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Description : Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Inclined borings are made for taking samples under existing structures (B) Inclined borings are occasionally used instead of vertical holes (C) The spacing of inclined borings is kept such that one bore hole is vertically above the bottom of an adjacent bore hole (D) All the above

Description : Pick up the correct statement from the following: (A) Inclined borings are made for taking samples under existing structures (B) Inclined borings are occasionally used instead of vertical holes (C) The ... bore hole is vertically above the bottom of an adjacent bore hole (D) All the above

Last Answer : Answer: Option D

If you have two quarters on a table touching each other, how can you move one of the quarters without touching it? You are only allowed to touch one quarter but not move it. You cant touch the quarter that you move. You want to get at least enough room between the two quarters to insert another coin between the two quarters. -Riddles

Description : If you have two quarters on a table touching each other, how can you move one of the quarters without touching it? You are only allowed to touch one quarter but not move it. You cant ... get at least enough room between the two quarters to insert another coin between the two quarters. -Riddles

Last Answer : Hold down one of the quarters very firmly. Take another coin and hit it against the quarter you are holding down. Tap hard enough to move the quarter next to it aside.

Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Description : Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Last Answer : Answer: A

Coast Guard Regulations (46 CFR) require manual contactors for operating the general emergency alarm on tank vessels to be located in the navigating bridge, engine room and the ____________. A. deck officers' quarters furthest from the engine room B. galley / dining room areas C. crew accommodations and sleeping spaces D. engineering officers' quarters furthest from the bridge

Description : Coast Guard Regulations (46 CFR) require manual contactors for operating the general emergency alarm on tank vessels to be located in the navigating bridge, engine room and the ____________. A ... C. crew accommodations and sleeping spaces D. engineering officers' quarters furthest from the bridge

Last Answer : Answer: A

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, is known as a plane wave (C) The relative phase difference between the waves is important and not the absolute phase of a point on the wave (D) All of these

Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

In a well planned city, the layout of distribution pipes generally adopted, is (A) Grid-iron system (B) Interlaced system (C) Reticulation system (D) All the above

Description : In a well planned city, the layout of distribution pipes generally adopted, is  (A) Grid-iron system  (B) Interlaced system  (C) Reticulation system  (D) All the above 

Last Answer : (D) All the above 

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

Post tensioning system (A) Was widely used in earlier days (B) Is not economical and hence not generally used (C) Is economical for large spans and is adopted now a days (D) None of these

Description : Post tensioning system (A) Was widely used in earlier days (B) Is not economical and hence not generally used (C) Is economical for large spans and is adopted now a days (D) None of these

Last Answer : Answer: Option D

If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

Description : If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is (A) Square (B) Rectangular (C) Trapezoidal (D) Triangular

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The length of the brass handle is included in the length of chain (B) The handles are on swivel joints to prevent twisting of the chain (C) The fifth tag from either end of the chain is numbered 5 (D) All the above

Description : Pick up the correct statement from the following: (A) The length of the brass handle is included in the length of chain (B) The handles are on swivel joints to prevent twisting of the chain (C) The fifth tag from either end of the chain is numbered 5 (D) All the above

Last Answer : (D) All the above

Afety regulations say that there should be at least 12m3 for each person in a room where people sleep.A room is 12m long,15 m wide and 5m high.What is the maximum number of people who can sleep in it safely?

Description : Afety regulations say that there should be at least 12m3 for each person in a room where people sleep.A room is 12m long,15 m wide and 5m high.What is the maximum number of people who can sleep in it safely?

Last Answer : length room =12m breadth room =15m height room =5m volume =LxBxH 12X15X5 =900 if 12 m3 space for each person then total number of people =900m2/12m3 = 75 people

Pick up the commonly adopted geophysical method in civil engineering from the following: (A) The seismic method (B) Electrical resistivity method (C) Gravitational method (D) Both (a) and (b) of the above

Description : Pick up the commonly adopted geophysical method in civil engineering from the following: (A) The seismic method (B) Electrical resistivity method (C) Gravitational method (D) Both (a) and (b) of the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Description : Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Description : Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Borrow pits are located outside the right of way (B) Borrow pits may be located on either side of the right of way (C) Spoil bank is located on one side of the right of way (D) All the above

Description : Pick up the correct statement from the following: (A) Borrow pits are located outside the right of way (B) Borrow pits may be located on either side of the right of way (C) Spoil bank is located on one side of the right of way (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Description : Pick up the correct statement from the following: (A) The phenol is carbolic acid (B) The phenol is either extracted from coal-tar or prepared from benzene (C) Phenol reacts with formaldehyde, to form phenol formaldehyde resin (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Description : The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Last Answer : Option A

The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : The thickness of a reinforced brick partition wall, is generally kept (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

Rotary tiller are wide adopted in rice cultivation due to a) Excessive pulverization b) Suitability for pudding paddy field c) Reduced draft requirement d) Complete inversion of soil

Description : Rotary tiller are wide adopted in rice cultivation due to a) Excessive pulverization b) Suitability for pudding paddy field c) Reduced draft requirement d) Complete inversion of soil

Last Answer : b) Suitability for pudding paddy field