Cavity wall is generally provided for
(A) Heat insulation
(B) Sound insulation
(C) Prevention of dampness
(D) All the above

1 Answer

Answer :

Answer: Option D

Related questions

Description : The inner section of a cavity wall, is generally known as (A) Buttress (B) Leaf wall (C) Pilaster (D) Pillar

Last Answer : Answer: Option B

Description : Refractory bricks resist (A) High temperature (B) Chemical action (C) Dampness (D) All the above

Last Answer : Answer: Option A

Description : Pick up the most favourable condition for the rapid growth of fungus for dry rot from the following: (A) Absence of sun light (B) Dampness (C) Presence of sap (D) All the above

Last Answer : Answer: Option D

Description : Sea sand used in structures causes (A) Dampness (B) Efflorescence (C) Disintegration (D) All of these

Last Answer : Answer: Option D

Description : Dampness causes (A) Efflorescence (B) Bleaching of paints (C) Crumbling of plaster (D) Growth of termites

Last Answer : Answer: Option D

Description : Which of the following metal sheets is most effective in preventing dampness? (A) Copper sheets (B) Lead sheets (C) Aluminium sheets (D) All the above

Last Answer : Answer: Option D

Description : The thickness of base slab of a retaining wall generally provided, is (A) One half of the width of the stem at the bottom (B) One-third of the width of the stem at the bottom (C) One fourth of the width of the steam at the bottom (D) Width of the stem at the bottom

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above

Last Answer : (D) All of the above

Description : Shrouding' is essentially provided in  (A) Strainer type wells  (B) Cavity type wells  (C) Slotted type well  (D) All the above 

Last Answer : (C) Slotted type well 

Description : Shrouding is provided in (A) Cavity type tube wells (B) Slotted type tube wells (C) Strainer type tube wells (D) Perforated type tube wells

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) Cavity of a cavity wall should start near ground level (B) Cavity of a cavity wall should terminate near eaves level of sloping roof (C) Cavity of a cavity wall should terminate near coping of flat roof with parapet wall (D) All the above

Last Answer : Answer: Option D

Description : The width of the hollow space between two walls of a cavity wall should not exceed (A) 5 cm (B) 7.5 cm (C) 10 cm (D) 15 cm

Last Answer : Answer: Option C

Description : A ribbed slab is provided for (A) A plain ceiling (B) Thermal insulation (C) Acoustic insulation (D) All the above

Last Answer : Answer: Option D

Description : Which of the following is characterized by excessive dampness with a thick growth forest and a variety of wild life? (a) Bhabar (b) Bhangar (c) Tarai (d) Khadar

Last Answer : Ans: (c)

Description : Suggest one type of materials for water proofing for the following situations. i. Rising dampness in building ii. Leakages in dam iii. Concrete continuously in wet or damp condition iv. Leakages in lavatory ,bathroom and kitchen floor v. Cracks on plastered surface vi. Cracks on roof surface

Last Answer : i. Flexible materials like butyl rubber, hot bitumen (asphalt), plastic sheets, bituminous felts, sheets of lead. ii. Liquid applied cementitious membranes iii. Liquid applied cementitious membranes ... v. Liquid applied cementitious membranes. vi. Brick bat coba, liquid applied bituminous membrane.

Description : Mastic asphalt is normally used for (A) Sound insulation (B) Water proofing (C) Fire proofing (D) None to these

Last Answer : Answer: Option B

Description : What is the amount of sound reduction provided by a barrier – wall, floor, or ceiling called? A. Sound Attenuation B. Transmission loss C. Sound absorption D. Barrier loss

Last Answer : B. Transmission loss

Description : Explain how a pea or a button which has got into the nasal cavity be removed. OR What is the first aid to be provided to a person who got a pea or a button into the nasal cavity accidentally?

Last Answer : If a pea or a button gets into the nasal cavity accidentally, give a pinch of snuff to the person. It causes violent sneezing and the foreign body will be thrown out. Visit a doctor if the above method does not work.

Description : Beneficial effects of β-adrenoceptor blockers in CHF include the following except: A. Antagonism of ventricular wall stress enhancing action of sympathetic overactivity B. Antagonism ... Prevention of pathological remodeling of ventricular myocardium D. Prevention of dangerous cardiac arrhythmias

Last Answer : B. Antagonism of vasoconstriction due to sympathetic overactivity

Description : For prevention of bleading generally which aluminum ions used.

Last Answer : Potass alum

Description : For prevention of bleading generally which aluminum ions used.

Last Answer : Potass alum

Description : A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Last Answer : (B) Muffle furnace

Description : What is the body cavity surrounded by wall called ?

Last Answer : : The body cavity surrounded by a wall is called cilantro.

Description : Body cavity is the cavity present between body wall and gut wall. In some animals the body cavity is not lined by mesoderm. Such animals are called

Last Answer : Body cavity is the cavity present between body wall and gut wall. In some animals the ... Acoelomate B. Pseudocoelomate C. Coelomate D. Haemocoelomate

Description : The globe: a. is closer to the orbital floor than the roof b. is closer to the lateral wall of the orbital cavity than to medial wall c. has a vertical diameter less than the anteroposterior diameter d. has an anterior segment which form 1/4 of the circumference e is least protected laterally

Last Answer : is closer to the lateral wall of the orbital cavity than to medial wall

Description : The figure given below shows a small part of human lung where exchange of gases takes place. Select the option which represents labelled part (A, B, C or D) correctly identified along with its function. ... Exchange of O2 and CO2 takes place here (d) B : Red blood cells - Transport of CO2 mainly

Last Answer : (b) A : Alveolar cavity - Main site of exchange of respiratory gases

Description : In class II restorations, all of the following are considered to occur as probable causes of periodontal problems except: A. Flat ridge B. Faulty or not proper contour C. Not properly polished restoration D. Cervical wall is too deeply apical E. Overextension of lining in cavity

Last Answer : E. Overextension of lining in cavity

Description : Stones are provided in the substation to: a) To avoid fire accident by draining oil from transformer if leaks b) To avoid growing of weeds and plants c) To provide insulation d) All the above

Last Answer : Ans: D

Description : Which type of protection is provided on a generator to protect against stator insulation failure? A) Differential protection B) Overcurrent relay C) Thermocouple actuated alarm D) Reverse power relay

Last Answer : Which type of protection is provided on a generator to protect against stator insulation failure? A) Differential protection B) Overcurrent relay C) Thermocouple actuated alarm D) Reverse power relay 

Description : The thickness of insulation provided on the conductor depends on?

Last Answer : The thickness of insulation provided on the conductor depends on the magnitude of voltage on the conductor.

Description : The insulation on a current carrying conductor is provided?

Last Answer : The insulation on a current carrying conductor is provided to prevent leakage of current, to prevent shock.

Description : If is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is (A) 0.3 H (B) 0.4 H (C) 0.5 H (D) 0.7 H

Last Answer : Answer: Option D

Description : Pick up the incorrect statement from the following: (A) In the stem of a retaining wall, reinforcement is provided near the earth side (B) In the toe slab of a retaining wall, reinforcement is ... slab of a retaining wall, reinforcement is provided at the top of the slab (D) None of these

Last Answer : Answer: Option D

Description : divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Last Answer : Answer: Option A

Description : Parapet walls along hill roads, are provided (A) To retain the back filling (B) To prevent the hill from sliding (C) To prevent the wheels of the vehicle from coming on the retaining wall (D) None of these

Last Answer : Answer: Option C

Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Last Answer : Answer: Option D

Description : The main reinforcement in the heel of a T-shaped R.C. retaining wall is provided on (A) Top face perpendicular to wall (B) Bottom face perpendicular to wall (C) Both top and bottom faces perpendicular to wall (D) None of these

Last Answer : Answer: Option A

Description : In the design of a front counterfort in a counterfort retaining wall, the main reinforcement is provided on (i) Bottom face near counterfort (ii) Top face near counterfort (iii) Bottom face near centre of span (iv) Top ... ) (B) Only (ii) (C) Both (i) and (iv) (D) Both (ii) and (iii)

Last Answer : Answer: Option C

Description : In a counterfort retaining wall, the main reinforcement in the stem at mid span is provided on (A) Front face only (B) Inner face only (C) Both front face and inner face (D) None of the above

Last Answer : Answer: Option A

Description : In a counterfort retaining wall, the main reinforcement is provided on the (i) Bottom face in front counterfort (ii) Inclined face in front counterfort (iii) Bottom face in back counterfort (iv) Inclined face in back counterfort ... (B) (ii) and (iii) (C) (i) and (iv) (D) (iii) and (iv)

Last Answer : Answer: Option C

Description : The temperature reinforcement in the vertical slab of a T-shaped R.C. retaining wall is (A) Not needed (B) Provided equally on inner and front faces (C) Provided more on inner face than on front face (D) Provided more on front face than on inner face

Last Answer : Answer: Option D

Description : Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Last Answer : Answer: Option D

Description : The stepped structure provided for lateral support of a structure, is (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Last Answer : Answer: Option C

Description : Pick up the incorrect statement from the following: (A) The retaining wall should be structurally capable to resist the applied earth pressure (B) The section of the retaining wall should be so ... off water from the earth retained, weep holes are provided near the top of the retaining wall

Last Answer : Answer: Option D

Description : The vertical sides of a door and window openings provided in a wall, are known as (A) Verticals (B) Reveals (C) Jambs (D) None of these

Last Answer : Answer: Option C

Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

Description : In English garden wall bond (A) One course of headers to three or five course of stretchers (B) Queen closer in provided in each heading course (C) The middle course of stretchers is started with a header to give proper vertical joints (D) All the above

Last Answer : Answer: Option D

Description : The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called (A) Recessed pointing (B) Weather pointing (C) V-pointing (D) Tuck pointing

Last Answer : Answer: Option B