A roof which slopes in four directions, is called (A) Shed roof (B) Gable end roof (C) Hipped roof (D) Gambrel roo

A roof which slopes in four directions, is called
(A) Shed roof
(B) Gable end roof
(C) Hipped roof
(D) Gambrel roo
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The type of roof which slopes in two directions with a break in the slope on each side is known as (A) Gable roof (B) Hip roof (C) Gambrel roof (D) Mansard roof

Description : The type of roof which slopes in two directions with a break in the slope on each side is known as (A) Gable roof (B) Hip roof (C) Gambrel roof (D) Mansard roof

Last Answer : Option C

In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Description : In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Last Answer : Option C

Mansard roof is a roof which slopes in (A) Two directions without break in the slope on each side (B) Two directions with break in the slope on each side (C) Four directions without break in the slope on each side (D) Four directions with break in the slope on each side

Description : Mansard roof is a roof which slopes in (A) Two directions without break in the slope on each side (B) Two directions with break in the slope on each side (C) Four directions without break in the slope on each side (D) Four directions with break in the slope on each side

Last Answer : Answer: Option D

The lower edge of the pitched roof, from where the rain water of the roof surface drops down, is known as (A) Hip (B) Gable (C) Ridge (D) Eaves

Description : The lower edge of the pitched roof, from where the rain water of the roof surface drops down, is known as (A) Hip (B) Gable (C) Ridge (D) Eaves

Last Answer : Answer: Option D

Should I buy a house with a cross gabled or cross hipped roof?

Description : Should I buy a house with a cross gabled or cross hipped roof?

Last Answer : For most people, the choice is primarily asthetic. The cross gabled roof is cheaper and easier to build, but it is not ideal for high wind situations. The cross hipped roof is more complex ... stronger winds. However, it leaves less under roof space for potential storage and ease of maintenace.

The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Description : The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Last Answer : Answer: Option B

An R.C.C. roof slab is designed as a two way slab if (A) It supports live loads in both directions (B) The ratio of spans in two directions is less than 2 (C) The slab is continuous over two supports (D) The slab is discontinuous at edges

Description : An R.C.C. roof slab is designed as a two way slab if (A) It supports live loads in both directions (B) The ratio of spans in two directions is less than 2 (C) The slab is continuous over two supports (D) The slab is discontinuous at edges

Last Answer : Answer: Option B

The rain water harvesting shown here is A. Recharge Pit. B. Recharge Trench. C. Roof top rain water harvesting. D. Bunds of slopes.

Description : The rain water harvesting shown here is A. Recharge Pit. B. Recharge Trench. C. Roof top rain water harvesting. D. Bunds of slopes.

Last Answer : B. Recharge Trench.

When you do strenuous exercise, oxygen is used up rapidly. What substance is formed. a) pyruvic acid(pron: pie-ROO-vik) b) lactic acid c) glucose d) alcohol

Description : When you do strenuous exercise, oxygen is used up rapidly. What substance is formed. a) pyruvic acid(pron: pie-ROO-vik) b) lactic acid c) glucose d) alcohol

Last Answer : ANSWER: B -- LACTIC ACID

During an early step of respiration, glucose is converted into two identical molecules of: a) CO2 b) ATP c) pyruvic acid(pron: pie-ROO-vik) d) chlorophyll

Description : During an early step of respiration, glucose is converted into two identical molecules of: a) CO2 b) ATP c) pyruvic acid(pron: pie-ROO-vik) d) chlorophyll

Last Answer : ANSWER: C -- PYRUVIC ACID

A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2:1, the earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Description : A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2 ... earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Last Answer : (D) 27,500 m3

Do I need to install a gable vent on every gable?

Description : Do I need to install a gable vent on every gable?

Last Answer : Vent the highest point of the house. No need to do every gable if the roof is open (attic). If you ever re-roof then consider ridge vents. Can’t get any higher than ridge vents.

How Gable boxes were invented what's their history is?

Description : How Gable boxes were invented what's their history is?

Last Answer : Appealing, strong, and sturdy, that is the thing that printed peak sacks are.Their prevalence and request are expanding each day all around the world. They are adaptable as they can be isolated ... Get Fully Customized Gable Boxes, Visit the Link Below:"thecustomboxes.co.uk/gift-boxes/gable-boxes/"

Which company is best to buy Custom Gable Boxes at wholesale?

Description : Which company is best to buy Custom Gable Boxes at wholesale?

Last Answer : Many companies provide gable boxes in the USA. But here is the company which provides the premium quality packaging boxes including gable boxes at the lowest price with free shipping next to your doorsteps. Visit: halfpricepackaging .com

A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Description : A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Last Answer : a. horizontal

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

Water may not contain much impurity if its source is (A) Reservoirs (B) Stream flowing in plains (C) Lakes in lower regions (D) Spring along hill slopes

Description : Water may not contain much impurity if its source is  (A) Reservoirs  (B) Stream flowing in plains  (C) Lakes in lower regions  (D) Spring along hill slopes

Last Answer : (D) Spring along hill slopes

For slopes of limited extent the surface of slippage, is usually along (A) A parabolic arc (B) An elliptical arc (C) A straight line (D) A circular arc

Description : For slopes of limited extent the surface of slippage, is usually along (A) A parabolic arc (B) An elliptical arc (C) A straight line (D) A circular arc

Last Answer : (D) A circular arc

The method of the slices is applicable to (A) Homogenous soils (B) Stratified soils (C) Saturated soils (D) Non-uniform slopes

Description : The method of the slices is applicable to (A) Homogenous soils (B) Stratified soils (C) Saturated soils (D) Non-uniform slopes

Last Answer : Answer: Option A

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

Stability of hill slopes depends upon (A) Nature of the slope (B) Angle of the slope (C) Geological conditions (D) All the above

Description : Stability of hill slopes depends upon (A) Nature of the slope (B) Angle of the slope (C) Geological conditions (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following. The width of the right-of-way is decided so as to accommodate (A) Formation width (B) Side slopes (C) Horizontal curve (D) Vertical curve

Description : Pick up the incorrect statement from the following. The width of the right-of-way is decided so as to accommodate (A) Formation width (B) Side slopes (C) Horizontal curve (D) Vertical curve

Last Answer : Answer: Option D

Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Description : Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Last Answer : Answer: Option C

The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Description : The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Last Answer : Answer: Option B

The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Description : The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient ... calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Last Answer : (B) 3225 m3

Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Description : Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Last Answer : (c) 0.577

Two different channels, M and N, in two different sites are designed based on Lacey’s theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) Channel M will have steeper longitudinal slope b) Channel N will have steeper longitudinal slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Description : Two different channels, M and N, in two different sites are designed based on Lacey's theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) ... slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Last Answer : b) Channel N will have steeper longitudinal slope

Male gametophyte of angiosperms is shed at (a) four celled pollen grain (b) three celled pollen grain (c) microspore mother cell (d) anther.

Description : Male gametophyte of angiosperms is shed at (a) four celled pollen grain (b) three celled pollen grain (c) microspore mother cell (d) anther.

Last Answer : b) three celled pollen grain

Contour lines of different elevations can unite to form one line, only in the case of (A) A vertical cliff (B) A saddle (C) A water shed line (D) A hill top

Description : Contour lines of different elevations can unite to form one line, only in the case of  (A) A vertical cliff  (B) A saddle  (C) A water shed line  (D) A hill top 

Last Answer : (A) A vertical cliff 

If the potential infiltration of a water shed having a soil with fair pasture cover, is 10 cm and rainfall is 12 cm, the direct run off is : (A) 2 cm (B) 3 cm (C) 5 cm (D) 7 cm

Description : If the potential infiltration of a water shed having a soil with fair pasture cover, is 10 cm and rainfall is 12 cm, the direct run off is : (A) 2 cm (B) 3 cm (C) 5 cm (D) 7 cm

Last Answer : Answer: Option C

The run off is affected by (A) Size of the basin (B) Shape of the basin (C) Elevation of the water shed (D) All the above

Description : The run off is affected by (A) Size of the basin (B) Shape of the basin (C) Elevation of the water shed (D) All the above

Last Answer : Answer: Option D

When a fluorescent lamp has reached the end of its useful life, it should be replaced immediately, or the resultant flashing may _____________. A. blow the lamp's circuit breaker B. explode, causing glass to fly in all directions C. short circuit the ballast transformer D. damage the starter and the ballast

Description : When a fluorescent lamp has reached the end of its useful life, it should be replaced immediately, or the resultant flashing may _____________. A. blow the lamp's circuit breaker B. explode, ... fly in all directions C. short circuit the ballast transformer D. damage the starter and the ballast

Last Answer : Answer: D

In single action harrow two gangs placed end to end, which through the soil in directions. b. Same c. Diagonal d. None of the above

Description : In single action harrow two gangs placed end to end, which through the soil in directions. b. Same c. Diagonal d. None of the above

Last Answer : Ans - a. Opposite

Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse (B) The system of a series of lines which forms a circuit which ends at the starting point, is called a closed traverse (C) The traverse that starts from a point already fixed in some survey system and ends on another such point, is called a controlled traverse (D) All the above

Description : Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse ... system and ends on another such point, is called a controlled traverse (D) All the above

Last Answer : (D) All the above

The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard

Description : The materials which have the same elastic properties in all directions, are called  (A) Isotropic  (B) Brittle  (C) Homogeneous  (D) Hard 

Last Answer : (A) Isotropic 

A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Description : A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Last Answer : (b) Flat slab

The factors which include the form, surface, and behaviour of the earth with special reference to slopes, mountains, and valleys are called

Description : The factors which include the form, surface, and behaviour of the earth with special reference to slopes, mountains, and valleys are called

Last Answer : The factors which include the form, surface, and behaviour of the earth with special reference ... factors C. Climatic factors D. Topographic factors

A wall constructed with stones to protect slopes of cuttings in natural ground from the action of weathering agents, is called (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Description : A wall constructed with stones to protect slopes of cuttings in natural ground from the action of weathering agents, is called (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Last Answer : Option B

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero

The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance

Description : The angle between the directions of the failure and the major principal plane, is equal to (A) 90° + effective angle of shearing resistance (B) 90° + half of the angle of shearing resistance (C) 45° - half of the angle of shearing resistance (D) 45° + half of the angle of shearing resistance

Last Answer : Answer: Option D

The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less than that perpendicular to stratification (C) Is always same in both directions (D) Parallel to stratification may or may not be greater than that perpendicular to stratification

Description : The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less ... D) Parallel to stratification may or may not be greater than that perpendicular to stratification

Last Answer : Answer: Option A

Spatial variation in horizontal and vertical directions is caused due to: (A) Physical weathering of rocks (B) Chemical weathering of rocks (C) Biological weathering of rocks (D) All of these

Description : Spatial variation in horizontal and vertical directions is caused due to: (A) Physical weathering of rocks (B) Chemical weathering of rocks (C) Biological weathering of rocks (D) All of these

Last Answer : Answer: Option D

While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than (A) WL/12 (L - 2D/3)² (B) WL/10 (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by (A) 0.2 (B) 0.3 (C) 0.4 (D) 0.5

Description : If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by (A) 0.2 (B) 0.3 (C) 0.4 (D) 0.5

Last Answer : Answer: Option D

The maximum ratio of span to depth of a slab simply supported and spanning in two directions, is (A) 25 (B) 30 (C) 35 (D) 40

Description : The maximum ratio of span to depth of a slab simply supported and spanning in two directions, is (A) 25 (B) 30 (C) 35 (D) 40

Last Answer : Answer: Option C