Pick up the incorrect statement from the following. The width of the right-of-way is decided so as to accommodate (A) Formation width (B) Side slopes (C) Horizontal curve (D) Vertical curve

Pick up the incorrect statement from the following. The width of the right-of-way is decided so as
to accommodate
(A) Formation width
(B) Side slopes
(C) Horizontal curve
(D) Vertical curve
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Description : Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Last Answer : (c) 0.577

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Highways are always constructed in straight line (B) Highways may be provided horizontal curves (C) Highways may be provided vertical curves (D) Highways may be provided both horizontal and vertical curves

Description : Pick up the incorrect statement from the following: (A) Highways are always constructed in straight line (B) Highways may be provided horizontal curves (C) Highways may be provided vertical curves (D) Highways may be provided both horizontal and vertical curves

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Description : The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient ... calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Last Answer : (B) 3225 m3

Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is in the plane of incidence, vertical polarisation is formed (C) When the electric vector is at right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Description : Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is ... right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Last Answer : Answer: Option D

A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Description : A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Last Answer : a. horizontal

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Last Answer : Answer: Option D

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Lead is the average horizontal straight distance between the borrow pit and the place of spreading soil (B) The lead is calculated for each block of the excavated area (C) The unit of lead is 50 m for a distance upto 500 m (D) The unit of lead is 1 km where the lead exceeds 2 km

Description : Pick up the incorrect statement from the following: (A) Lead is the average horizontal straight distance between the borrow pit and the place of spreading soil (B) The lead is calculated for each block of the ... a distance upto 500 m (D) The unit of lead is 1 km where the lead exceeds 2 km

Last Answer : (D) The unit of lead is 1 km where the lead exceeds 2 km

Pick up the incorrect statement from the following. On highways circular curves may be (A) Simple curves (B) Compound curves (C) Reverse curves (D) Vertical curves

Description : Pick up the incorrect statement from the following. On highways circular curves may be (A) Simple curves (B) Compound curves (C) Reverse curves (D) Vertical curves

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) In king post truss, one vertical post is used (B) In a queen post truss, one vertical post is used (C) In a queen post truss, two vertical posts are used (D) None of thes

Description : Pick up the incorrect statement from the following: (A) In king post truss, one vertical post is used (B) In a queen post truss, one vertical post is used (C) In a queen post truss, two vertical posts are used (D) None of thes

Last Answer : Answer: Option B

Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Description : Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Description : Pick up the correct statement from the following: (A) In stone arches, the stones are placed with their natural beds radial (B) In cornices, the stones are placed with their natural beds as vertical (C) In stone walls, the stones are placed with their natural beds as horizontal (D) All the above

Last Answer : Answer: Option D

If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves, (A) L/R (B) L/2R (C) L²/2R (D) L/3R

Description : If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves, (A) L/R (B) L/2R (C) L²/2R (D) L/3R

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by a straight horizontal line on the grading curve (C) The omission of a certain size of aggregate in concrete increases the workability but also increases the liability to segregation (D) All the above

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug out whose size is kept equal to the size of the test plate (C) Bottom level of the hole dug at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Description : Pick up the correct statement applicable to plate load test (A) Width of the test pit for plate load test is made five times the width of the plate (B) At the centre of the test pit, a hole is dug ... at the centre of the test pit, is kept at the level of the actual formation (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The vertical distance between a maximum ordinate and the next forward maximum ordinate represents the whole volume of the embankment (C) The vertical distance between a minimum ordinate and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Description : Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The ... and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Last Answer : Answer: Option D

On a grading curve, the gap grading is represented by (A) A horizontal line (B) A vertical line (C) N.W. inclined line (D) N.E. inclined line

Description : On a grading curve, the gap grading is represented by (A) A horizontal line (B) A vertical line (C) N.W. inclined line (D) N.E. inclined line

Last Answer : Answer: Option A

Which gauge is used to measure the height of rail at the time of aligning of rails for AT welding? (i) Height gauge.* (ii) Vertical gauge (iii) Horizontal gauge (iv) As decided by site supervisor

Description : Which gauge is used to measure the height of rail at the time of aligning of rails for AT welding? (i) Height gauge.* (ii) Vertical gauge (iii) Horizontal gauge (iv) As decided by site supervisor

Last Answer : (iv) As decided by site supervisor

When Benetton, the sportswear designer and manufacturer, decided to open its own specialty shops to sell its merchandise, the firm was engaging in A)channel repetition . B)vertical channel integration. C)a conventional marketing channel. D)horizontal channel integration. E)channel expansion.

Description : When Benetton, the sportswear designer and manufacturer, decided to open its own specialty shops to sell its merchandise, the firm was engaging in A)channel repetition B)vertical channel integration. C)a conventional marketing channel. D)horizontal channel integration. E)channel expansion.

Last Answer : B)vertical channel integration.

Pick up the correct statement from the following: (A) If the bed level is above N.S.L. the canal is called fully in baking and the berms are designed as 3 d where d is full supply depth of water (F.S.D.) (B) Area of canal in cutting = BD + Sd 2 where B = bed width, d = depth of cutting and S is the side slope (C) If F.S.L. is above N.S.L the canal is called partly in cutting and partly in filling and berms are designed as 2d where d is full supply depth (D) All the above

Description : Pick up the correct statement from the following: (A) If the bed level is above N.S.L. the canal is called fully in baking and the berms are designed as 3 d where d is full supply depth of water ... and partly in filling and berms are designed as 2d where d is full supply depth (D) All the above

Last Answer : (D) All the above

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

Pick up the incorrect statement from the following: (A) In the stem of a retaining wall, reinforcement is provided near the earth side (B) In the toe slab of a retaining wall, reinforcement is provided at the bottom of the slab (C) In the heel slab of a retaining wall, reinforcement is provided at the top of the slab (D) None of these

Description : Pick up the incorrect statement from the following: (A) In the stem of a retaining wall, reinforcement is provided near the earth side (B) In the toe slab of a retaining wall, reinforcement is ... slab of a retaining wall, reinforcement is provided at the top of the slab (D) None of these

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C. Septic tanks are completely covered and high vent shafts are provided for the escape of foul gases D. None of these

Description : Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C ... covered and high vent shafts are provided for the escape of foul gases D. None of these

Last Answer : ANS: D

The Marginal Utility Curve slopes downward from left to right indicating - (1) A direct relationship between marginal utility and the stock of commodity (2) A constant relationship between marginal utility and the stock of commodity (3) A proportionate relation-ship between marginal utility and the stock of commodity (4) An inverse relationship between marginal utility and the stock of commodity

Description : The Marginal Utility Curve slopes downward from left to right indicating - (1) A direct relationship between marginal utility and the stock of commodity (2) A constant relationship between marginal ... stock of commodity (4) An inverse relationship between marginal utility and the stock of commodity

Last Answer : (4) An inverse relationship between marginal utility and the stock of commodity Explanation: The Marginal Utility Curve is a curve illustrating the relation between the marginal utility obtained from ... marginal (additional) benefit to the consumer falls; hence consumers are prepared to pay less.

On an indifference map, if the income consumption curve slopes downwards to the right it shows that A.Both X and Y are superior goods B.Y is an inferior good C.X is an inferior good D.Both X and Y are inferior goods

Description : On an indifference map, if the income consumption curve slopes downwards to the right it shows that A.Both X and Y are superior goods B.Y is an inferior good C.X is an inferior good D.Both X and Y are inferior goods

Last Answer : B.Y is an inferior good

The Marginal Utility Curve slopes downward from left to right indicating (1) A direct relationship between marginal utility and the stock of commodity (2) A constant relationship between marginal utility and the stock of commodity (3) A proportionate relationship between marginal utility and the stock of commodity (4) An inverse relationship between marginal utility and the stock of commodity

Description : The Marginal Utility Curve slopes downward from left to right indicating (1) A direct relationship between marginal utility and the stock of commodity (2) A constant relationship between marginal ... stock of commodity (4) An inverse relationship between marginal utility and the stock of commodity

Last Answer : An inverse relationship between marginal utility and the stock of commodity

Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

Pick up the correct statement from the following: (A) D.P.C. should be continuous (B) D.P.C. should be of good impervious material (C) D.P.C. may be horizontal or vertical (D) All the above

Description : Pick up the correct statement from the following: (A) D.P.C. should be continuous (B) D.P.C. should be of good impervious material (C) D.P.C. may be horizontal or vertical (D) All the above

Last Answer : Option D

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Description : Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Last Answer : (D) The arrows are drawn to scale from left to right

Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Description : Formation width of a hill road is the distance between (A) Outer end of side drain to outer end of parapet wall (B) Outer end of side drain to inner end of parapet wall (C) Inner end of side drain to outer end of parapet wall (D) Inner end of side drain to inner end of parapet wall

Last Answer : Answer: Option A

If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Description : If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Last Answer : (B) Bd + Sd2

The curve composed of two arcs of different radii having their centres on the opposite side of the curve, is known (A) A simple curve (B) A compound curve (C) A reverse curve (D) A vertical curve

Description : The curve composed of two arcs of different radii having their centres on the opposite side of the curve, is known (A) A simple curve (B) A compound curve (C) A reverse curve (D) A vertical curve

Last Answer : (C) A reverse curve

Pick up the correct statement from the following: (A) Box sextant is used for the measurement of horizontal angles (B) Cross staff is used for setting out right angles (C) Gradiometer is used for setting out any required gradient (D) All the above

Description : Pick up the correct statement from the following: (A) Box sextant is used for the measurement of horizontal angles (B) Cross staff is used for setting out right angles (C) Gradiometer is used for setting out any required gradient (D) All the above

Last Answer : (D) All the above

The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side

Description : The specific humidity scale on a psychrometric chart is along the: a. Bottom horizontal axis b. Right side vertical axis c. Top horizontal axis at the top of the chart d. Left saturation line e. Left-side vertical axis and left side

Last Answer : Answer: B

The width of the right of way, is influenced by (A) Formation width (B) Shoulders or berms (C) Classification of road (D) All the above

Description : The width of the right of way, is influenced by (A) Formation width (B) Shoulders or berms (C) Classification of road (D) All the above

Last Answer : Answer: Option D

The full width of land acquired before finalising a highway, alignment is known (A) Width of formation (B) Right of way (C) Carriage way (D) Roadway

Description : The full width of land acquired before finalising a highway, alignment is known (A) Width of formation (B) Right of way (C) Carriage way (D) Roadway

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit (B) When the vertical circle is to the left of the telescope during observation, it is called to be in left face (C) When the vertical circle is to the right of the telescope during observation, it is called to be in right face (D) All the above

Description : Pick up the correct statement from the following:  (A) The theodolite in which telescope can be rotated in vertical plane is called a transmit  (B) When the vertical circle is to the left of ... the telescope during observation, it is called to be  in right face  (D) All the above 

Last Answer : (D) All the above 

Total fixed cost curve is - (1) Vertical (2) Horizontal (3) Positively Sloping (4) Negatively sloping

Description : Total fixed cost curve is - (1) Vertical (2) Horizontal (3) Positively Sloping (4) Negatively sloping

Last Answer : (2) Horizontal Explanation: The Total Fixed Cost Curve is a curve that graphically represents the relation between total fixed cost incurred by a firm in the short-run product of a good or service and the ... cost are, in fact, fixed, the total fixed cost curve is, in fact, a horizontal line.

An indifference curve is always A.A vertical straight line B.Convex to the origin C.Concave to the origin D.A horizontal straight line

Description : An indifference curve is always A.A vertical straight line B.Convex to the origin C.Concave to the origin D.A horizontal straight line

Last Answer : B.Convex to the origin

The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Description : The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Last Answer : A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors