The method of the slices is applicable to (A) Homogenous soils (B) Stratified soils (C) Saturated soils (D) Non-uniform slopes

The method of the slices is applicable to
(A) Homogenous soils
(B) Stratified soils
(C) Saturated soils
(D) Non-uniform slopes
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The Westergaard analysis is used for (A) Sandy soils (B) Cohesive soils (C) Stratified soils (D) Clayey soils

Description : The Westergaard analysis is used for (A) Sandy soils (B) Cohesive soils (C) Stratified soils (D) Clayey soils

Last Answer : (C) Stratified soils

A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2:1, the earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Description : A portion of an embankment having a uniform up-gradient 1 in 500 is circular with radius 1000 m of the centre line. It subtends 180° at the centre. If the height of the bank is 1 m at the lower end, and side slopes 2 ... earth work involved. (A) 26,000 m3 (B) 26,500 m3 (C) 27,000 m3 (D) 27,500 m

Last Answer : (D) 27,500 m3

Bishop's method of stability analysis (A) Is more conservative (B) Neglects the effect of forces acting on the sides of the slices (C) Assumes the slip surface as an arc of a circle (D) All of the above

Description : Bishop's method of stability analysis (A) Is more conservative (B) Neglects the effect of forces acting on the sides of the slices (C) Assumes the slip surface as an arc of a circle (D) All of the above

Last Answer : Answer: Option C

Khaddar soils are found (a) in piedmont plains (b) in flood plains (c) over low plateaux (d) over steep slopes

Description : Khaddar soils are found (a) in piedmont plains (b) in flood plains (c) over low plateaux (d) over steep slopes

Last Answer : Ans: (b)

The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Description : The vane shear test is used for the in-situ determination of the undrained strength of the intact fully saturated (A) Sands (B) Clays (C) Gravels (D) Highly organic soils

Last Answer : (B) Clays

A Most Favored nation status doesn’t necessarily refers to A. Same and equal economic treatment B. Non-discriminatory treatment C. Same tariff rates applicable D. Uniform civil code

Description : A Most Favored nation status doesn’t necessarily refers to A. Same and equal economic treatment B. Non-discriminatory treatment C. Same tariff rates applicable D. Uniform civil code

Last Answer : Uniform civil code

Valleys formed by glaciers always have which of the following characteristics? w) U-shaped cross sections x) straight courses y) uniform slopes z) bedrock floors

Description : Valleys formed by glaciers always have which of the following characteristics? w) U-shaped cross sections x) straight courses y) uniform slopes z) bedrock floors

Last Answer : ANSWER: W -- U-SHAPED CROSS SECTIONS

Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression test (C) Stress distribution on the failure plane in the case of triaxial compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Description : Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression ... compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Last Answer : Answer: Option D

Competition -oriented pricing is: A)used when costs and revenues are considered secondary to competitors' prices. B)not useful as a method of increasing or maintaining market share. C)of little use if the competing products are homogenous. D)most often used when competing products are heterogeneous.

Description : Competition-oriented pricing is: A)used when costs and revenues are considered secondary to competitors' prices. B)not useful as a method of increasing or maintaining market share. C)of little use if the competing products are homogenous. D)most often used when competing products are heterogeneous.

Last Answer : A)used when costs and revenues are considered secondary to competitors' prices.

In clay soils, the fields often have to be fully saturated tillage can be undertaken. A. Before. C) After B. Beginning. D) Middle

Description : In clay soils, the fields often have to be fully saturated tillage can be undertaken. A. Before. C) After B. Beginning. D) Middle

Last Answer : Before

Herbicides are more tightly bound to soils under which of the condition a). Field capacity b). Saturated c). Both a and b d). Dry

Description : Herbicides are more tightly bound to soils under which of the condition a). Field capacity b). Saturated c). Both a and b d). Dry

Last Answer : d). Dry

Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel for structural purpose as it is more homogenous (C) Basic Bessemer process is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Description : Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel ... is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Last Answer : Answer: Option D

Independent assortment of genes does not take place when (a) genes are located on homologous chromosomes (b) genes are linked and located on same chromosome (c) genes are located on non-homogenous chromosome (d) all of these.

Description : Independent assortment of genes does not take place when (a) genes are located on homologous chromosomes (b) genes are linked and located on same chromosome (c) genes are located on non-homogenous chromosome (d) all of these.

Last Answer : genes are linked and located on same chromosome

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

A homogenous mixture of two or more metal or a metal and non-metal is known as _____. a) alloy b)element c)mineral d)compound

Description : A homogenous mixture of two or more metal or a metal and non-metal is known as _____. a) alloy b)element c)mineral d)compound

Last Answer : a) alloy

On the basis of the nature, of variable the types of survey method are Options: A) Stratified survey and survey researches B) Sample and population related researches C) Surveys through Questionnaire and interviews D) All the above

Description : On the basis of the nature, of variable the types of survey method are Options: A) Stratified survey and survey researches B) Sample and population related researches C) Surveys through Questionnaire and interviews D) All the above

Last Answer : A) Stratified survey and survey researches 

Which one of the following is a nonprobability sampling method ? (A) Simple Random Sampling (B) Stratified Sampling (C) Cluster Sampling (D) Quota Sampling

Description : Which one of the following is a nonprobability sampling method ? (A) Simple Random Sampling (B) Stratified Sampling (C) Cluster Sampling (D) Quota Sampling

Last Answer : (D) Quota Sampling

When a research problem is related to heterogeneous population, the most suitable sampling method is: (A) Cluster Sampling (B) Stratified Sampling (C) Convenient Sampling (D) Lottery Method

Description : When a research problem is related to heterogeneous population, the most suitable sampling method is: (A) Cluster Sampling (B) Stratified Sampling (C) Convenient Sampling (D) Lottery Method

Last Answer : (B) Stratified Sampling

Which of the following sampling method is appropriate to study the prevalence of AIDS amongst male and female in India in 1976, 1986, 1996 and 2006 ? (A) Cluster sampling (B) Systematic sampling (C) Quota sampling (D) Stratified random sampling

Description : Which of the following sampling method is appropriate to study the prevalence of AIDS amongst male and female in India in 1976, 1986, 1996 and 2006 ? (A) Cluster sampling (B) Systematic sampling (C) Quota sampling (D) Stratified random sampling

Last Answer :  (B) Systematic sampling

What is the best method to go for the game playing problem? (1) Optimal Search (2) Random Search (3) Heuristic Search (4) Stratified Search

Description : What is the best method to go for the game playing problem? (1) Optimal Search (2) Random Search (3) Heuristic Search (4) Stratified Search 

Last Answer : (3) Heuristic Search

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

The wedging is adopted for quarrying costly stratified rock such as (A) Laterite (B) Marble (C) Limestone (D) All the above

Description : The wedging is adopted for quarrying costly stratified rock such as (A) Laterite (B) Marble (C) Limestone (D) All the above

Last Answer : Answer: Option D

In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Description : In arches, stratified stones are placed so that their planes are (A) Parallel (B) Perpendicular (C) Radial (D) None of these

Last Answer : Answer: Option C

In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Description : In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Last Answer : Answer: Option A

Lime stone is not a (A) Sedimentary rock (B) Stratified rock (C) Aqueous rock (D) Metamorphic rock

Description : Lime stone is not a (A) Sedimentary rock (B) Stratified rock (C) Aqueous rock (D) Metamorphic rock

Last Answer : Answer: Option D

Geologically, marble is known as (A) Sedimentary rock (B) Igneous rock (C) Metamorphic rock (D) Stratified rock

Description : Geologically, marble is known as (A) Sedimentary rock (B) Igneous rock (C) Metamorphic rock (D) Stratified rock

Last Answer : Answer: Option C

Lime stones are generally known as (A) Aqueous rocks (B) Sedimentary rocks (C) Stratified rocks (D) All the above

Description : Lime stones are generally known as (A) Aqueous rocks (B) Sedimentary rocks (C) Stratified rocks (D) All the above

Last Answer : Answer: Option D

Stratified and non-keratinised squamous epithelium occurs in

Description : Stratified and non-keratinised squamous epithelium occurs in

Last Answer : Stratified and non-keratinised squamous epithelium occurs in A. Epidermis of skin B. Vagina and cervix C. Buccal cavity D. Both 2 and 3

Non keratinised stratified squamous epitheliium is found in : -

Description : Non keratinised stratified squamous epitheliium is found in : -

Last Answer : Non keratinised stratified squamous epitheliium is found in : - A. Skin B. Stomach C. Oesophagus D. Intestine

Which one of the following is a non probability sampling? (A) Simple Random (B) Purposive (C) Systematic (D) Stratified

Description : Which one of the following is a non probability sampling? (A) Simple Random (B) Purposive (C) Systematic (D) Stratified

Last Answer : (B) Purposive

Which one is called non-probability sampling? (A) Cluster sampling (B) Quota sampling (C) Systematic sampling (D) Stratified random sampling

Description : Which one is called non-probability sampling? (A) Cluster sampling (B) Quota sampling (C) Systematic sampling (D) Stratified random sampling

Last Answer : Explanation: No n-probability sampling is a sampling technique where the samples are gathered in a process that does not give all the individuals in the population equal chances of being selected. ... po pulation with respect to known characteristics, traits or focused ph enomenon. Answer: B  

.Differences in slopes between two points A and B by the moment area method is given by a.Area of BMD diagram between A and B /2EI. b.Area of BMD diagram between A and B /3EI. C.Area of BMD diagram between A and B /EI d.None.

Description : .Differences in slopes between two points A and B by the moment area method is given by a.Area of BMD diagram between A and B /2EI. b.Area of BMD diagram between A and B /3EI. C.Area of BMD diagram between A and B /EI d.None.

Last Answer : C.Area of BMD diagram between A and B /EI

Which of the following methods is best suited for determination of permeability of coarse-grained soils? (A) Constant head method (B) Falling head method (C) Both the above (D) None of the above

Description : Which of the following methods is best suited for determination of permeability of coarse-grained soils? (A) Constant head method (B) Falling head method (C) Both the above (D) None of the above

Last Answer : Answer: Option A

The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Description : The most suitable method for drainage of fine grained cohesive soils is (A) Well point system (B) Vacuum method (C) Deep well system (D) Electro-osmosis method

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The object of classifying soils is to arrange them into groups according to their properties and behaviour (B) A soil classification system is meant to provide an accepted and systematic method of describing the various types of soils eliminating personal factors (C) The first category of soil classification is based on grain size of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) The object of classifying soils is to arrange them into groups according to their properties and behaviour (B) A soil classification system is ... first category of soil classification is based on grain size of the soil (D) All the above

Last Answer : Answer: Option D

California Bearing Ratio method of designing flexible pavements is more accurate as it involves (A) Characteristics of soils (B) Traffic intensities (C) Character of the road making materials (D) None of these

Description : California Bearing Ratio method of designing flexible pavements is more accurate as it involves (A) Characteristics of soils (B) Traffic intensities (C) Character of the road making materials (D) None of these

Last Answer : Answer: Option C

Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Description : Auger boring (A) Is the most primitive method for making a hole in the ground (B) Is generally employed in cohesive and other self soils above water table (C) Is most economical upto a depth of 5 metres (D) All the above

Last Answer : Answer: Option D

Rotary drilling is the fastest method in case of (A) Rocky soils (B) Clay soils (C) Sandy soil (D) All of these

Description : Rotary drilling is the fastest method in case of (A) Rocky soils (B) Clay soils (C) Sandy soil (D) All of these

Last Answer : Answer: Option D

In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Description : In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Last Answer : Answer: Option D

Water may not contain much impurity if its source is (A) Reservoirs (B) Stream flowing in plains (C) Lakes in lower regions (D) Spring along hill slopes

Description : Water may not contain much impurity if its source is  (A) Reservoirs  (B) Stream flowing in plains  (C) Lakes in lower regions  (D) Spring along hill slopes

Last Answer : (D) Spring along hill slopes

For slopes of limited extent the surface of slippage, is usually along (A) A parabolic arc (B) An elliptical arc (C) A straight line (D) A circular arc

Description : For slopes of limited extent the surface of slippage, is usually along (A) A parabolic arc (B) An elliptical arc (C) A straight line (D) A circular arc

Last Answer : (D) A circular arc

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

Stability of hill slopes depends upon (A) Nature of the slope (B) Angle of the slope (C) Geological conditions (D) All the above

Description : Stability of hill slopes depends upon (A) Nature of the slope (B) Angle of the slope (C) Geological conditions (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following. The width of the right-of-way is decided so as to accommodate (A) Formation width (B) Side slopes (C) Horizontal curve (D) Vertical curve

Description : Pick up the incorrect statement from the following. The width of the right-of-way is decided so as to accommodate (A) Formation width (B) Side slopes (C) Horizontal curve (D) Vertical curve

Last Answer : Answer: Option D

Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Description : Gradient resistance of moving vehicles along down slopes, is (A) + 7 kg/tonne (B) + 9 kg/tonne (C) - 9 kg/tonne (D) - 7 kg/tonne

Last Answer : Answer: Option C

The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Description : The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Last Answer : Answer: Option B

The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Description : The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient ... calculated by Prismoidal formula, is (A) 3250 m3 (B) 3225 m3 (C) 3275 m3 (D) 3300 m3

Last Answer : (B) 3225 m3

A roof which slopes in four directions, is called (A) Shed roof (B) Gable end roof (C) Hipped roof (D) Gambrel roo

Description : A roof which slopes in four directions, is called (A) Shed roof (B) Gable end roof (C) Hipped roof (D) Gambrel roo

Last Answer : Answer: Option C

The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Description : The highest line of sloping roof, where two opposite slopes meet, is known as (A) Rafter (B) Ridge (C) Crown (D) Eave

Last Answer : Answer: Option B

Mansard roof is a roof which slopes in (A) Two directions without break in the slope on each side (B) Two directions with break in the slope on each side (C) Four directions without break in the slope on each side (D) Four directions with break in the slope on each side

Description : Mansard roof is a roof which slopes in (A) Two directions without break in the slope on each side (B) Two directions with break in the slope on each side (C) Four directions without break in the slope on each side (D) Four directions with break in the slope on each side

Last Answer : Answer: Option D