Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Pick up the correct statement from the following:
(A) The directions of plumb lines suspended at different points in a survey are not strictly
parallel
(B) In surveys of small extent, the effect of curvature may be ignored and the level surface of
the earth is assumed as horizontal
(C) In surveys of large extent, the effect of curvature of the earth must be considered
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Description : In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Last Answer : (B) Curvature of the earth surface is taken into account

Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse (B) The system of a series of lines which forms a circuit which ends at the starting point, is called a closed traverse (C) The traverse that starts from a point already fixed in some survey system and ends on another such point, is called a controlled traverse (D) All the above

Description : Pick up the correct statement from the following: (A) The framework which consists of a series of connected lines, the lengths and directions of which are found from measurements, is called a traverse ... system and ends on another such point, is called a controlled traverse (D) All the above

Last Answer : (D) All the above

The curvature of the earth's surface, is taken into account only if the extent of survey is more than (A) 100 sq km (B) 160 sq km (C) 200 sq km (D) 260 sq km

Description : The curvature of the earth's surface, is taken into account only if the extent of survey is more than (A) 100 sq km (B) 160 sq km (C) 200 sq km (D) 260 sq km

Last Answer : (D) 260 sq km

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) A level surface is perpendicular at all points to the direction of gravity (B) A level line lies in level surface (C) A horizontal surface is normal to the direction of gravity at only one point (D) All the above

Description : Pick up the correct statement from the following:  (A) A level surface is perpendicular at all points to the direction of gravity  (B) A level line lies in level surface  (C) A horizontal surface is normal to the direction of gravity at only one point  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The imaginary lines which pass through points at which the magnetic declinations are equal at a given time are called isogonic lines (C) The isogonic lines through places at which the declination is zero are termedagonic lines (D) All the above

Description : Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The ... lines through places at which the declination is zero are termedagonic lines (D) All the above

Last Answer : (D) All the above

The line normal to the plumb line is known as (A) Horizontal line (B) Level line (C) Datum line (D) Vertical line

Description : The line normal to the plumb line is known as (A) Horizontal line (B) Level line (C) Datum line (D) Vertical line

Last Answer : (B) Level line

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic lines of force can penetrate a medium (C) Permeability is expressed as the ratio of the magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Description : Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic ... magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The height of head light above road surface, is taken as 0.75 m (B) The beam of head light is up to one degree upwards from the grade of road (C) While designing the valley curve, the height of the object is assumed nil (D) All the above

Description : Pick up the correct statement from the following: (A) The height of head light above road surface, is taken as 0.75 m (B) The beam of head light is up to one degree upwards from the grade of road (C) While designing the valley curve, the height of the object is assumed nil (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, is known as a plane wave (C) The relative phase difference between the waves is important and not the absolute phase of a point on the wave (D) All of these

Description : Pick up the correct statement from the following: (A) The surface defined by the locus of points having same phase, is called a wave front (B) The wave whose surface of constant phase are parallel planes, ... waves is important and not the absolute phase of a point on the wave (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the concrete base (C) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Description : Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the ... ) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Last Answer : Option D

Pick up the correct statement from the following: (A) The precipitation during its travel in atmosphere dissolves certain gases (B) Rain water which percolates through the ground, is free from suspended materials (C) Underground water may dissolve minerals and salts present in the earth's layers (D) All the above

Description : Pick up the correct statement from the following:  (A) The precipitation during its travel in atmosphere dissolves certain gases  (B) Rain water which percolates through the ground, is free from ... water may dissolve minerals and salts present in the earth's layers  (D) All the above 

Last Answer : (D) All the above 

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is called sounding (C) The contour lines on the bed of a water body are called fathoms (D) All the abov

Description : Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is ... (C) The contour lines on the bed of a water body are called fathoms (D) All the above

Last Answer : (D) All the above

Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Description : Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Last Answer : i) Ranging Rod : Ranging rod are used for ranging. ii) Pegs : Pegs are used for marking the positions of stations or terminals points of survey lines. iii) Cross-staff : It is used ... It is also used for accurate centering of the surveying instruments like theodolite, compass, plane table etc. 

Pick up the correct statement from the following: (A) During reconnaissance, the general route of the alignment is selected (B) After reconnaissance, a trace is cut for the alignment (C) Last stage is the detailed surveys for desired geometries' of the highway (D) All the above

Description : Pick up the correct statement from the following: (A) During reconnaissance, the general route of the alignment is selected (B) After reconnaissance, a trace is cut for the alignment (C) Last stage is the detailed surveys for desired geometries' of the highway (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

Description : The assumed yield line pattern is to be correct when the lower bound solution ---------the upper bound solution [ A ] May be greater than [ B ] May be less than [ C ] Will coincide with [ D ] Must be less than

Last Answer : [ C ] Will coincide with

A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

Description : A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

Last Answer : (b) Points of equal elevation

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) A wire wound in spiral form, is called a helical spring (B) The pitch of a close coil spring, is very small (C) The angle made by the coil with horizontal, is called the angle of helix (D) All the above

Description : Pick up the correct statement from the following:  (A) A wire wound in spiral form, is called a helical spring  (B) The pitch of a close coil spring, is very small  (C) The angle made by the coil with horizontal, is called the angle of helix  (D) All the above

Last Answer : (D) All the above

Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Description : Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Last Answer : (D) None of these

First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Description : First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Last Answer : Answer: Option D

Reconnaissance is best done with the help of (A) Aerial photographic survey (B) Cadastral surveys (C) Topographical surveys (D) Triangulation surveys

Description : Reconnaissance is best done with the help of (A) Aerial photographic survey (B) Cadastral surveys (C) Topographical surveys (D) Triangulation surveys

Last Answer : Answer: Option A

India's latitudinal and longitudinal extent measured in degrees are almost the same, but its north-south extent measured in km is greater than its east-west extent. This is due to the fact that (a) longitudes are not parallel lines (b) the distance between latitudes remains the same but the distance between longitudes is greatest at the Equator and nil at the poles where all longitudes join (c) all longitudes with their opposites form great circles (d) the earth is not a perfect sphere

Description : India's latitudinal and longitudinal extent measured in degrees are almost the same, but its north-south extent measured in km is greater than its east-west extent. This is due to the fact that (a) ... (c) all longitudes with their opposites form great circles (d) the earth is not a perfect sphere

Last Answer : Ans: (b)

the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable (A) The aquifer is homogeneous and isotropic (B) Flow lines are radial and horizontal (C) The slope of the water surface is too small (D) The well has been sunk up to the surface of the unconfined aquifer

Description : the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable (A) The aquifer is homogeneous and isotropic (B) Flow lines are radial and ... the water surface is too small (D) The well has been sunk up to the surface of the unconfined aquifer

Last Answer : Answer: Option D

The method of finding out the difference in elevation between two points for eliminating the effect of curvature and refraction, is (A) Reciprocal levelling (B) Precise levelling (C) Differential levelling (D) Flying levelling

Description : The method of finding out the difference in elevation between two points for eliminating the  effect of curvature and refraction, is  (A) Reciprocal levelling  (B) Precise levelling  (C) Differential levelling  (D) Flying levelling 

Last Answer : (A) Reciprocal levelling 

According to Coulomb's wedge theory, the active earth pressure slides the wedge (A) Down and outwards on a slip surface (B) Up and inwards on a slip surface (C) Horizontal upward and parallel to base (D) Horizontal inward and parallel to base

Description : According to Coulomb's wedge theory, the active earth pressure slides the wedge (A) Down and outwards on a slip surface (B) Up and inwards on a slip surface (C) Horizontal upward and parallel to base (D) Horizontal inward and parallel to base

Last Answer : Answer: Option A

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Description : Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Last Answer : Answer: Option D

Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Description : Select incorrect statement from the following. In the Virtual work method, it is generally assumed that [ A ] Elastic deformations in the slab are negligible [ B ] Plastic deformations in the slab are negligible [ C ] Plastic deformations takes place at the yield lines [ D ] Both (a) and (b)

Last Answer : [ B ] Plastic deformations in the slab are negligible

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

An Expected Monetary Value (EMV) of $100000 on a potential project event in the project means which of the following? Select one: a. A number that can be ignored b. An opportunity that must be explored c. Actual losses on the event d. Actual investment returns on the event e. A threat that must be considered to minimize the project risk

Description : An Expected Monetary Value (EMV) of $100000 on a potential project event in the  project means which of the following? Select one: a. A number that can be ignored b. An opportunity that ... Actual investment returns on the event e. A threat that must be considered to minimize the project risk

Last Answer : b. An opportunity that must be explored

Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Description : Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above

Last Answer : Answer: Option D

The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Description : The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Last Answer : (D) Both viscosity and surface tension are increased

Horizontal distances obtained tacheometerically are corrected for (A) Slope correction (B) Temperature correction (C) Refraction and curvature correction (D) All the above

Description : Horizontal distances obtained tacheometerically are corrected for  (A) Slope correction  (B) Temperature correction  (C) Refraction and curvature correction  (D) All the above 

Last Answer : (C) Refraction and curvature correction

Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Description : Pick up the incorrect statement from the following: (A) Horizontal D.P.C. is provided at plinth level in internal walls (B) D.P.C. is provided under door and verandah openings (C) Vertical D.P.C. is not provided in internal walls (D) Cement concrete is a rigid damp-proofing material

Last Answer : Answer: Option B

The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less than that perpendicular to stratification (C) Is always same in both directions (D) Parallel to stratification may or may not be greater than that perpendicular to stratification

Description : The average coefficient of permeability of natural deposits (A) Parallel to stratification is always greater than that perpendicular to stratification (B) Parallel to stratification is always less ... D) Parallel to stratification may or may not be greater than that perpendicular to stratification

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Description : Pick up the incorrect statement from the following: (A) Iron salts produce heavy flocks and hence remove more suspended matter (B) Iron salts remove hydrogen sulphides (C) Iron salts can be used over a limited range of pH values (D) Iron salts impart corrosiveness to water

Last Answer : (C) Iron salts can be used over a limited range of pH values

Pick up the incorrect statement from the following: (A) Highways are always constructed in straight line (B) Highways may be provided horizontal curves (C) Highways may be provided vertical curves (D) Highways may be provided both horizontal and vertical curves

Description : Pick up the incorrect statement from the following: (A) Highways are always constructed in straight line (B) Highways may be provided horizontal curves (C) Highways may be provided vertical curves (D) Highways may be provided both horizontal and vertical curves

Last Answer : Answer: Option A

Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of 30 m to 60 m along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Description : Pick up the correct statement from the following: A. Inlets are provided on the road surface at the lowest point for draining rain water B. Inlets are generally provided at an interval of ... along straight roads C. Inlets having horizontal openings, are called horizontal inlets D. All the above

Last Answer : ANS: D

Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile(B) The layers of the soil parallel to the earth surface are called horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Description : Which one the following is a correct statement? (A) The vertical section of the soil extending into the parent material, is called profile (B) The layers of the soil parallel to the earth ... horizons (C) The transitional layer between two adjoining horizons is called boundary (D) All of these

Last Answer : Answer: Option D

The alignment of a cross joint along the plumb line is (A) Bed block (B) Perpend (C) Lintel (D) Vertical lin

Description : The alignment of a cross joint along the plumb line is (A) Bed block (B) Perpend (C) Lintel (D) Vertical lin

Last Answer : Answer: Option B

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying