Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500
Last Answer : Answer: Option D
Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550
Last Answer : c) 500*
Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550
Last Answer : (A) wQH/15
Description : The value of 'C' of Indian type W.C. shown in the given figure is: (A) 400 mm (B) 450 mm (C) 500 mm (D) 550 mm
Last Answer : (C) 500 mm
Description : Sum of tread and rise must lie between (A) 300 to 350 mm (B) 400 to 450 mm (C) 500 to 550 mm (D) 600 to 650 mm
Last Answer : Answer: Option B
Description : Hot extrusion of aluminium is done in the temperature range of __________ °C. (A) 550-600 (B) 450-500 (C) 350-400 (D) 250-300
Last Answer : (C) 350-400
Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above
Last Answer : Option D
Description : One cubic metre of water weighs (A) 100 litres (B) 250 litres (C) 500 litres (D) 1000 litres
Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the ... the water horse power of the pump is (A) 400 (B) 450 (C) 500 (D) 600
Last Answer : (D) 600
Description : The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is (A) Rs. 400 (B) Rs. 425 (C) Rs. 450 (D) Rs. 500
Last Answer : (C) Rs. 450
Description : The standard size of masonry bricks, is (A) 18 cm × 8 cm × 8 cm (B) 19 cm × 9 cm × 9 cm (C) 20 cm × 10 cm × 10 cm (D) 21 cm × 11 cm × 11 cm
Description : A masonry dam (density = 20,000 N/m3 ) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be (A) 75 N/m2 (B) 750 N/m2 (C) 7500 N/m2 (D) 75000 N/m
Last Answer : (C) 7500 N/m
Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4
Last Answer : Answer: Option C
Description : 74 Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes
Last Answer : ANSWER: B
Description : Total iron ore reserves in Pakistan are _______ A. 400 million tonnes B. 500 million tonnes C. 550 million tonnes D. 590 million tonnes
Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm
Last Answer : a)400-550 rpm
Description : Speed of the cutter bar in case of combine (grain) is :- a) 400 – 550 rpm b) 500 – 800 rpm C) 800 - 1000 rpm d) 1000 – 1200 rpm
Last Answer : a) 400 – 550 rpm
Description : The monthly incomes of A and B are in the ratio 4:5, their expenses are in the ratio 5 : 6. If 'A' saves Rs.25 per month and 'B' saves Rs.50 per month, what are their respective incomes? A) Rs.400 and Rs.500 B) Rs.240 and Rs.300 C) Rs.320 and Rs.400 D) Rs.440 and Rs.550 E) NONE
Last Answer : Answer: A Let AA's income be = 4x AA's expenses, therefore = 4x–25 Let BB's income be = 5x BB's expenses, therefore = 5x–50 We know that the ratio of their expenses = 5:6 ⇒24x−150=25x−250 ⇒ Therefore, x=100 A's income =4x=400 and B's income =5x=500
Description : According to IS: 456-2000, the maximum cement content exclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3
Last Answer : [ C ] 450 kg/m3
Description : According to IS:456 minimum cement content inclusive of admixtures is [ A ] 200 kg/m3 [ B ] 300 kg/m3 [ C ] 450 kg/m3 [ D ] 550 kg/m3
Last Answer : [ B ] 300 kg/m3
Description : Side face reinforcement is provided when the depth of beam exceeds [ A ] 250 mm [ B ] 450 mm [ C ] 550 mm [ D ] 750 mm
Last Answer : [ D ] 750 mm
Description : Pick up the correct statement from the following: (A) The breakwater which can be used as a platform for loading and unloading of cargo is called a mole (B) The brick masonry retaining wall which is ... wall (C) Three types of break waters are generally provided in harbours (D) All of the above
Last Answer : (D) All of the above
Description : Stucco paints are suitable for (A) Stone masonry (B) Brick walls (C) Both (A) and (B) (D) Neither (A) nor (B)
Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side
Description : In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond
Description : The type of bond provided in brick masonry for carrying heavy loads is (A) Single Flemish bond (B) Double Flemish bond (C) English bond (D) Zigzag bond
Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) English bond is used for brick masonry to support heavy loads (B) Double-Flemish bond is suitable for brick masonry to give uniform face ... The stretcher bond is used for the construction of half brick masonry brick (D) All the above
Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m
Description : The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called (A) Flemish bond (B) English bond (C) Stretcher bond (D) Header bond
Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2
Last Answer : : Option B
Description : The position of the neutral axis in reinforced brick masonry is independent of the loading and is at a depth of
Last Answer : (a) One-third of the effective depth
Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.
Last Answer : (d) All of the above.
Description : As per the Constitution of India, what is the limit prescribed for the number of members in the Legislative Assembly of a State? (1) 350 members (2) 400 members (3) 450 members (4) 500 members
Last Answer : (4) 500 members Explanation: The number of members ranges between 60 and 500.
Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th
Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400
Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5
Description : Is 450 closer to 400 or 500?
Last Answer : Technically, it's closer to neither, but as a rule of rounding, if it's halfway, you round up, so you would round it to 500.
Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data
Last Answer : A. 461.62 N
Description : Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm
Last Answer : (b) 400-600 mm
Description : What is the range of the visible light cure beam: A. 100-120 nm B. 200-300 nm C. 400-430 nm D. 470 nm or 450-500 nm
Last Answer : D. 470 nm or 450-500 nm
Description : The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these
Description : Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above
Description : Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above
Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick
Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other
Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia
Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework