The type of pointing in which upper side of mortar joints is kept about 12 mm inside the face of the masonry and bottom is kept flushed with face of wall, is (A) Truck pointing (B) Recessed pointing (C) Struck pointing (D) Grooved pointing

The type of pointing in which upper side of mortar joints is kept about 12 mm inside the face of
the masonry and bottom is kept flushed with face of wall, is
(A) Truck pointing
(B) Recessed pointing
(C) Struck pointing
(D) Grooved pointing
by

1 Answer

Answer :

Option C
by

Related questions

Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Last Answer : Option D

Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Description : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

Last Answer : Draw a neat labeled sectional view showing different components of building from foundation to parapet, for a load bearing brick masonry wall.

A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Description : A mortar joint in masonry which is normal to the face of wall is known as (A) Bed joint (B) Wall joint (C) Cross joint (D) Bonded join

Last Answer : Answer: Option C

The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called (A) Recessed pointing (B) Weather pointing (C) V-pointing (D) Tuck pointing

Description : The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called (A) Recessed pointing (B) Weather pointing (C) V-pointing (D) Tuck pointing

Last Answer : Answer: Option B

The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Description : The frog of the brick in a brick masonry is generally kept on (A) Bottom face (B) Top face (C) Shorter side (D) Longer side

Last Answer : Answer: Option B

Describe the procedure for carrying out the ‘Plastering’ in cement mortar in two coats.

Description : Describe the procedure for carrying out the ‘Plastering’ in cement mortar in two coats.

Last Answer : The mix ratio of mortar in case of cement plastering depends upon the nature of the work to be plastered.  For rich plastering work at sensitive places (e.g. in side bathrooms, W.C. etc.), 1:3 ... help of a steel float. It is then allowed to set for 2 days and cured for more than 7 days.

Differentiate between brick masonry and stone masonry

Description : Differentiate between brick masonry and stone masonry

Last Answer : Sr. no. Brick masonry Stone masonry 1 It is cheaper than stone masonry It is stronger than Brick masonry 2 It is cheaper in places where clay is available It is ... easy to apply any finishing to Brick surface. It is difficult to apply any finishing to stone surface

Describe any eight characteristics of good stone masonry.

Description : Describe any eight characteristics of good stone masonry. 

Last Answer : The requirements of good stone masonry are as follows:- 1. The stones to be used for stone masonry should be hard, tough & durable. 2. The stone should be properly dressed as per the ... constructed perfectly in plumb. 11. The exposed joints of the masonry should be properly pointed by mortar.

Describe the terms facing and hearting in stone masonry.

Description : Describe the terms facing and hearting in stone masonry.

Last Answer : i) Facing – The material which is used in the face of the wall is known as facing. ii) Hearting – The portion of the wall between the facing and backing is known as the hearting.

As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Description : As a ‘Supervisor’, state precautionary measures you will observe while constructing brick masonry, along with their reasons.

Last Answer : Following Precautionary measures are to be observe as a supervisor while constructing brick masonry: 1. Bricks should be as per the specification. The bricks should be well burnt, reddish in colour, sound and hard ... is used and for a period of about one to two weeks, if cement mortar is used.

Compare stone masonry construction with brick masonry construction.

Description : Compare stone masonry construction with brick masonry construction.

Last Answer : STONE MASONRY  BRICK MASONRY 1. Stone masonry is stronger and more durable than brick masonry 1. Brick masonry is less stronger and less durable than stone masonry. 2. ... other hand is considered unsuitable in the construction of piers, docks, dams and other marine structure.

Describe any four forms of ‘Rubble Masonry’ with sketches.

Description : Describe any four forms of ‘Rubble Masonry’ with sketches.

Last Answer : 1) Dry rubble masonry: - In dry rubble masonry, dressed or undressed stones are used without mortar. Bigger pieces of stones are arranged at the bottom and smaller pieces of stones are used at the top. ... should not exceed 13 mm. the stone used in this masonry should be of uniform color.  

State the precautions to be observed in stone masonry construction.

Description : State the precautions to be observed in stone masonry construction.

Last Answer : Following are the precautions to be observed in stone masonry construction: 1. Stone used in masonry should be well seasoned, hard, tough, uniform in texture. 2. Stones used should be free from ... on the natural bed. 10. The exposed joints of the masonry should be properly pointed by mortar.

Compare brick masonry and stone masonry used in building construction.

Description : Compare brick masonry and stone masonry used in building construction.

Last Answer : Sr. No. Brick Masonry Stone Masonry 1 It is less stronger than stone masonry. It is stronger than brick masonry. 2 It is cheaper in places where clay is available ... is used Double scaffolding is used 12 Plastering is required  Plastering is not required

Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*

Last Answer : d) all the above*

Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

Does ribbon pointing make a wall of masonry stronger than other kinds of pointing?

Description : Does ribbon pointing make a wall of masonry stronger than other kinds of pointing?

Last Answer : answer:I don't know for certain, but it's not the pointing that lends strength to the joint, it's the mortar inside between the stones. The big thing is that you need to keep water from getting ... and replacing it, not just repointing. He may have taken I just want them repointed at face value.

Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.

Description : Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.  

Last Answer : Requirements of good formwork:- 1. It should be adequately strong to withstand an extensive variety of dead and live loads. For instance, self-weight, weight of reinforcement, weight of wet concrete, loads of ... of concreting. 8. It should be lightweight. 9. It should be easy to remove.

The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry

Description : The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is (A) Chamfered ashlar masonry (B) Ashlar facing masonry (C) Random coursed ashlar masonry (D) Coursed ashlar masonry

Last Answer : Answer: Option D

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

The pile which supports the load due to friction between pile face and surrounding soil, is generally known as (A) Bearing pile (B) Friction pile (C) Sheet pile (D) Battered pile

Description : The pile which supports the load due to friction between pile face and surrounding soil, is generally known as (A) Bearing pile (B) Friction pile (C) Sheet pile (D) Battered pile

Last Answer : Option B

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

A wall constructed to resist the pressure of an earth filling, is called (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Description : A wall constructed to resist the pressure of an earth filling, is called (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Last Answer : Option A

A wall constructed with stones to protect slopes of cuttings in natural ground from the action of weathering agents, is called (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Description : A wall constructed with stones to protect slopes of cuttings in natural ground from the action of weathering agents, is called (A) Retaining wall (B) Breast wall (C) Buttress (D) Parapet wall

Last Answer : Option B

Explain the procedure of preparation of surface along with the method of application of color wash paint on the wall.

Description : Explain the procedure of preparation of surface along with the method of application of color wash paint on the wall.

Last Answer : The correct preparation of surface plays an important role in preserving the properties and life of the paint. For these the procedure is as follows: 1.If the receiving surface is rough, it should be made smooth ... of color wash paint on the wall. 1.By Brushing. 2.By Spraying. 3. By Rollers.

Explain the procedure of internal plastering a newly built brick wall.

Description : Explain the procedure of internal plastering a newly built brick wall.

Last Answer : Procedure : The mix ratio of mortar in case of cement plastering depends upon the nature of the work to be plastered. For rich plastering work at sensitive places (e.g. in side bathrooms, W.C. etc.), 1:3 ... a steel float. It is then allowed to set for 2 days and cured for more than 8 to 10 days.

The position of a brick when laid on its side 9 cm × 9 cm with its frog in the vertical plane, is called (A) Brick on edge (B) Brick on end (C) Brick on bed (D) Brick held vertically

Description : The position of a brick when laid on its side 9 cm × 9 cm with its frog in the vertical plane, is called (A) Brick on edge (B) Brick on end (C) Brick on bed (D) Brick held vertically

Last Answer : Option B

Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Description : Expansion Joints in masonry walls are provided in wall lengths usater than (A) 10 m (B) 20 m (C) 30 m (D) 40 m

Last Answer : Answer: Option D

Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to resist a sagging bending moment near mid-span. (c) When the slab is built into a brick or masonry wall the slab should be designed to resist a hogging moment at the face of the support. (d) All of the above.

Description : Find the correct statement from the followings. (a) For a cantilever slab, the ratio of span to overall depth should not 12. (b) One way slab which carry uniformly distributed load should be designed to ... be designed to resist a hogging moment at the face of the support. (d) All of the above.

Last Answer : (d) All of the above.

Why disc insulators grooved at bottom?

Description : Why disc insulators grooved at bottom?  

Last Answer : To increase the creepage distance, reduce the chances of flash over.  

The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Description : The strength of brick masonry in 1:6 cement mortar, is (A) 20 tonnes/m2 (B) 40 tonnes/m2 (C) 50 tonnes/m2 (D) 60 tonnes/m

Last Answer : Answer: Option C

The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Last Answer : : Option B

Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Description : Arches in the form of masonry arcs struck from more than four centres, are called (A) Two curved arches (B) Gothic arches (C) Ogee arches (D) Drop gothic arches

Last Answer : Answer: Option C

The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Description : The stretcher bond in brick masonry can be used only when the thickness of wall is (A) 90 mm (B) 180 mm (C) 190 mm (D) 280 mm

Last Answer : Answer: Option A

Define shoring. Enlist types of shoring. Explain any one type with neat sketch.

Description : Define shoring. Enlist types of shoring. Explain any one type with neat sketch.

Last Answer : Shoring:- Shoring is the construction of a temporary structure to support temporarily an unsafe structure. These support walls laterally. Shoring can be used when walls bulge out, when walls crack due to ... of the structure above and transfer same to the ground on firm foundation below. 

Suggest relevant type of foundation with sketch for educational building on black cotton soil with justification.

Description : Suggest relevant type of foundation with sketch for educational building on black cotton soil with justification. 

Last Answer : Black cotton soil- Pile foundation. In case the depth of black cotton soil is more, the following type of foundation may be provided 1. Strip or pad foundation 2. Pier foundation with ... of expansive soil. They are bored cast-in-situ concrete piles having bulb shaped enlarged base.

State the classification of building as per type of construction.

Description : State the classification of building as per type of construction. 

Last Answer : Following are the classification of building as per type of construction: 1. Residential Buildings. 2. Public Buildings. 3. Institutional Buildings. 4. Assembly building. 5. Business Buildings. ... . Storage Buildings. 8. Hazardous Buildings. 9. Framed structure. 10. Load bearing structure

Enlist different types of staircase. Explain any one type with a neat sketch.

Description : Enlist different types of staircase. Explain any one type with a neat sketch.

Last Answer : Types of Staircase: 1. Straight Stair 2. Dog legged Stair 3. Quarter turn Stair 4. Open well Stair 5. Three quarter turn Stair 6. Bifurcated Stair 7. Geometrical Stair 8. Circular ... . This well may be rectangular or of any geometrical shape and it can be used for fixing lift.

Suggest relevant type of foundation with sketch for a residential building with Marshy soil at greater depth with justification and explanation.

Description : Suggest relevant type of foundation with sketch for a residential building with Marshy soil at greater depth with justification and explanation.

Last Answer : Raft foundation is suitable for a residential building with Marshy soil at greater depth It is suitable where ground is soft, Clayey or marshy having low bearing capacity and where sub soil water ... of thick reinforced concrete slab covering the entire area of the bottom of the structure.

Can alcohol make your face flushed or neck burn or feel strange?

Description : Can alcohol make your face flushed or neck burn or feel strange?

Last Answer : A flushed face is common, this is the first time I’ve heard of neck pain but I wouldn’t consider it cause for alarm as long as it dissipates quickly. It may also mean you have allergies (or sensitivities) to some contents, my mother for example gets beet red when she drinks even a sip of red wine.

The nurse recognizes which of the following signs as typical of the patient in shock? a) Rapid, weak, thready pulse Pulse increases as the body tries to compensate. b) Flushed face Pallor is an indicator of shock. c) Warm, dry skin Skin is generally cool and moist in shock. d) Increased urine output Usually, a low blood pressure and concentrated urine are observed in the patient in shock.

Description : The nurse recognizes which of the following signs as typical of the patient in shock? a) Rapid, weak, thready pulse Pulse increases as the body tries to compensate. b) Flushed face Pallor is ... urine output Usually, a low blood pressure and concentrated urine are observed in the patient in shock.

Last Answer : a) Rapid, weak, thready pulse Pulse increases as the body tries to compensate.

The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Description : The expected out turn of 12 mm plastering with cement mortar is (A) 2.5 sq m (B) 4.0 sq m (C) 6.0 sq m (D) 8.0 sq m

Last Answer : (D) 8.0 sq m

Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area

Description : Raft foundation are generally preferred to when the area required for individual footing, is more than (A) 25% to total area (B) 30% of total area (C) 40% to total area (D) 50% of total area

Last Answer : Option D

Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the concrete base (C) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Description : Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the ... ) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Last Answer : Option D

The pile provided with one or more bulles in its vertical shaft, is generally known as (A) Under-ream pile (B) Friction pile (C) Bearing pile (D) Sheet pile

Description : The pile provided with one or more bulles in its vertical shaft, is generally known as (A) Under-ream pile (B) Friction pile (C) Bearing pile (D) Sheet pile

Last Answer : Option A

The Auger borings are not common (A) In soils that require lateral support (B) In cohesive soils (C) In soft soils (D) None of the above

Description : The Auger borings are not common (A) In soils that require lateral support (B) In cohesive soils (C) In soft soils (D) None of the above

Last Answer : Option A

Pitched and sloping roofs are suitable for (A) Coastal regions (B) Plain regions (C) Covering large areas (D) All of the above

Description : Pitched and sloping roofs are suitable for (A) Coastal regions (B) Plain regions (C) Covering large areas (D) All of the above

Last Answer : Option A

Pick up the correct statement from the following: (A) The pile driven in sand is called sand pile (B) The drilled hole filled with sand is called sand pile (C) The sand piles are used for bearing purposes (D) None of these

Description : Pick up the correct statement from the following: (A) The pile driven in sand is called sand pile (B) The drilled hole filled with sand is called sand pile (C) The sand piles are used for bearing purposes (D) None of these

Last Answer : Option A

The foundation which consists of a thick reinforced cement slab covering whole area to support heavy concentrated structural loads, is known as (A) Combined footing (B) Strap footing (C) Raft footing (D) None of these

Description : The foundation which consists of a thick reinforced cement slab covering whole area to support heavy concentrated structural loads, is known as (A) Combined footing (B) Strap footing (C) Raft footing (D) None of these

Last Answer : Option C