Plywood is obtained by gluing wooden sheets at (A) 100 to 150 N/cm2 (B) 100 to 130°C (C) Both (A) and (B) (D) Neither (A) n

Plywood is obtained by gluing wooden sheets at
(A) 100 to 150 N/cm2
(B) 100 to 130°C
(C) Both (A) and (B)
(D) Neither (A) nor (b)
by

1 Answer

Answer :

Answer: Option C
by

Related questions

A simply supported wooden beam 150 cm long and having a cross section 16 cm × 24 cm carries a concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2 and fs= 10 kg/cm2 the safe load is (A) 3025 kg (B) 3050 kg (C) 3075 kg (D) 3100 kg

Description : A simply supported wooden beam 150 cm long and having a cross section 16 cm × 24 cm carries a  concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2  and fs= 10 kg/cm2  the safe  load is  (A) 3025 kg  (B) 3050 kg  (C) 3075 kg  (D) 3100 kg 

Last Answer : (C) 3075 kg 

The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Description : The minimum strength of the mortar used in load bearing brick masonry, is (A) 50 N/cm2 (B) 100 N/cm2 (C) 150 N/cm2 (D) 200 N/cm2

Last Answer : : Option B

Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C

Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/cm2 (C) The water at pressure 1 to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Description : Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/ ... to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Last Answer : (D) None of these

In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Description : In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Last Answer : (A) 100 kg/cm2

If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm(C) 150 cm (D) 200 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Description : Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : (C) 200 kg/cm2

Permissible compressive strength of M 300 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 300 kg/cm2

Description : Permissible compressive strength of M 300 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 300 kg/cm2

Last Answer : (D) 300 kg/cm2

Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Description : Permissible compressive strength of M 200 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : Answer: Option C

Permissible compressive strength of M 150 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Description : Permissible compressive strength of M 150 concrete grade is (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm2 (D) 250 kg/cm2

Last Answer : Answer: Option C

gluing artificial stone to the plaster

Description : hello, I want to glue an artificial stone to the wall in the apartment, will it be enough to scrape the paint, penetrate and glue ?? It's lightweight concrete. Do you have any experience ??

Last Answer : Well, really ... you really don't want to wrap the plaster? ... Well, you don't have to, but you'll have to roughen it ... you need this. even on the ceiling ..: D you glue it will keep it clear ...: ... then holds the whole not every stove special so you would not be afraid ..: D ☢ ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

The live load to be considered for an inaccessible roof, is (A) Nil (B) 75 kg/m2 (C) 150 kg/cm2 (D) 200 kg/m

Description : The live load to be considered for an inaccessible roof, is (A) Nil (B) 75 kg/m2 (C) 150 kg/cm2 (D) 200 kg/m

Last Answer : Answer: Option B

If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Description : If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is (A) 28 d (B) 38 d (C) 48 d (D) 58 d

Last Answer : Answer: Option D

The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Description : The minimum cube strength of concrete used for a pre-stressed member, is (A) 50 kg/cm2 (B) 150 kg/cm2 (C) 250 kg/cm2 (D) 350 kg/cm

Last Answer : Answer: Option D

For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Description : For M 150 mix concrete, according to I.S. specifications, local bond stress, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Last Answer : Answer: Option B

According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Description : According to I.S. : 456 specifications, the safe diagonal tensile stress for M 150 grade concrete, is (A) 5 kg/cm2 (B) 10 kg/cm2 (C) 15 kg/cm2 (D) 20 kg/cm

Last Answer : Answer: Option A

The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

A rectangular log of wood is floating in water with a load of 100 N at its centre. The maximum shear force in the wooden log is (A) 50 N at each end (B) 50 N at the centre (C) 100 N at the centre (D) None of these

Description : A rectangular log of wood is floating in water with a load of 100 N at its centre. The maximum shear force in the wooden log is (A) 50 N at each end (B) 50 N at the centre (C) 100 N at the centre (D) None of these

Last Answer : (C) 100 N at the centre

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Last Answer : Answer: Option A

Plywood is normally available (A) 1 mm thick (B) 2 mm thick (C) 2 to 3 mm thick (D) 3 mm to 4 mm thick

Description : Plywood is normally available (A) 1 mm thick (B) 2 mm thick (C) 2 to 3 mm thick (D) 3 mm to 4 mm thick

Last Answer : Answer: Option D

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Description : The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Last Answer : Answer: Option C

Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above

Description : Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above

Last Answer : Answer: Option C

Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Galvanising (i.e., zinc coating) of steel sheets is done to (A) Prevent its rusting by contact with corrosive atmosphere (B) Protect the base metal by cathodic protection (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Description : Operating temperature and pressure in catalytic reforming is about (A) 1-5 Kgf/cm2 & 200°C (B) 15-45 Kgf/cm2 & 450-550°C (C) 50 - 75 kgf/cm2 & 600 - 800°C (D) 5-10 kgf/cm2 & 150 - 250°C

Last Answer : (B) 15-45 Kgf/cm2 & 450-550°C

Stress may be expressed in Newtons (A) Per millimetre square (N/mm2 ) (B) Per centimetre square (N/cm2 ) (C) Per metre square (N/m2 ) (D) None of these

Description : Stress may be expressed in Newtons  (A) Per millimetre square (N/mm2 )  (B) Per centimetre square (N/cm2 )  (C) Per metre square (N/m2 )  (D) None of these 

Last Answer : (A) Per millimetre square (N/mm2 )

Modulus of elasticity of steel as per IS: 4561978 shall be taken as (A) 20 kN/cm² (B) 200 kN/cm² (C) 200 kN/mm² (D) 2 × 106 N/cm2

Description : Modulus of elasticity of steel as per IS: 4561978 shall be taken as (A) 20 kN/cm² (B) 200 kN/cm² (C) 200 kN/mm² (D) 2 × 106 N/cm2

Last Answer : Answer: Option C

While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/cm2 Answer: Option

Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at  the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is:  (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c

Last Answer : (A) 960 kg/cm

The principal stresses at a point are 100, 100 and -200 kgf/cm2 , the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2(D) 400 kg/cm2

Description : The principal stresses at a point are 100, 100 and -200 kgf/cm2 , the octahedral shear stress at the  point is:  (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm2

Last Answer : (A) 100 kg/cm2

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Last Answer : Answer: Option A

In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm

Description : In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm

Last Answer : Answer: Option D

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

The minimum compressive strength of 1st class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm2

Description : The minimum compressive strength of 1st class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm2

Last Answer : Answer: Option C

The minimum compressive strength of 2nd class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm

Description : The minimum compressive strength of 2nd class bricks should be (A) 75 kg/cm2 (B) 90 kg/cm2 (C) 100 kg/cm2 (D) 120 kg/cm

Last Answer : Answer: Option A

The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are: (A) b = 57.73 cm d = 81.65 cm (B) b = 81.65 cm d = 57.73 cm (C) b = 50.00 cm d = 50.00 cm (D) b = 40.00 cm d = 80.00 cm

Description : The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for  maximum strength are:  (A) b = 57.73 cm d = 81.65 cm  (B) b = 81.65 cm d = 57.73 cm  (C) b = 50.00 cm d = 50.00 cm  (D) b = 40.00 cm d = 80.00 cm 

Last Answer : (A) b = 57.73 cm d = 81.65 cm 

The following items may be sent as printed papers through book packet a) Manuscripts of works or for newpaper b) Musical scores or sheets of music in manuscript. c) Papers obtained by means of a typewriter of any type d) films and sound recording e) a & b only

Description : The following items may be sent as printed papers through book packet a) Manuscripts of works or for newpaper b) Musical scores or sheets of music in manuscript. c) Papers obtained by means of a typewriter of any type d) films and sound recording e) a & b only

Last Answer : e) a & b only

The safe length L of a valley curve for night travel is (A) 2S - (1.50 + 0.035 S)/N if L < S (B) NS²/(1.50 + 0.035 S) if L > S (C) Neither (a) nor (b)(D) Both (a) and (b

Description : The safe length L of a valley curve for night travel is (A) 2S - (1.50 + 0.035 S)/N if L < S (B) NS²/(1.50 + 0.035 S) if L > S (C) Neither (a) nor (b) (D) Both (a) and (b

Last Answer : Answer: Option D

A cantilever beam of span 3m carries a point load 100 N at the free end. The maximum B.M in the beam will be (a) 100 N-m (b) 300 N-m (c) 150 N-m (d) 600 N-m

Description : A cantilever beam of span 3m carries a point load 100 N at the free end. The maximum B.M in the beam will be (a) 100 N-m (b) 300 N-m (c) 150 N-m (d) 600 N-m

Last Answer : (b) 300 N-m

Permissible creep in track is m. 50 mm n. 100 mm o. 125 mm p. 150 mm.*

Description : Permissible creep in track is m. 50 mm n. 100 mm o. 125 mm p. 150 mm.*

Last Answer : p. 150 mm.*

I am trying to construct a giant book made with plywood for the corner of a children's room. How should I go about constructing the binding/support for the book to stay standing, and also be able to open the book 90 degrees?

Description : I am trying to construct a giant book made with plywood for the corner of a children's room. How should I go about constructing the binding/support for the book to stay standing, and also be able to open the book 90 degrees?

Last Answer : Maybe an internal metal frame, and the moving parts rested on wheels.

What kind of wood and plywood used in home decor?

Description : What kind of wood and plywood used in home decor?

Last Answer : Well, thanks to the growth of the wood and plywood industry, that the answer to this question What kind of wood and plywood used in home decor?' cannot have one single answer. Amulya Mica being ... , the selection depends on you will be using the plywood in future for home décor purpose.In Plywood

Which is the best plywood for interior work in India?

Description : Which is the best plywood for interior work in India?

Last Answer : There are many plywood manufacturing companies in India. The variety makes it tough for consumers to make a final choice. Thus, we would use this space to jot the distinguishing factors of plywood ... Mica ply is strong. The strength is evenly and well distributed across the body of the furniture

How is premium plywood different from cheap plywood?

Description : How is premium plywood different from cheap plywood?

Last Answer : Premium plywood is much more different than cheap plywood. The materials involved in making cheap plywood are boards sawn and hewn from trees. Whereas, premium plywood is laminated through the multiple ... Sydney where the weather remains hot and humid. The cheaper plywood of Sydney might ruin a

Can rotary tool be use to cut plywood?

Description : Can rotary tool be use to cut plywood?

Last Answer : yes, with a flex-shift attachment

Is plywood absorbent?

Description : Is plywood absorbent?

Last Answer : Feel Free to Answer

What is the verb and adverb for this following sentence Carefully Dan nailed the plywood to the top of the dresser?

Description : What is the verb and adverb for this following sentence Carefully Dan nailed the plywood to the top of the dresser?

Last Answer : carefully = adverbnailed = past tense verb

What is the verb and adverb for this following sentence Carefully Dan nailed the plywood to the top of the dresser?

Description : What is the verb and adverb for this following sentence Carefully Dan nailed the plywood to the top of the dresser?

Last Answer : carefully = adverbnailed = past tense verb