Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m
Last Answer : (C) 0.274 m3
Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material
Last Answer : Answer: Option B
Description : A reinforced concrete slab is 75 mm thick. The maximum size of reinforcement bar that can be used is (a) 6 mm diameter (b) 8 mm diameter (c) 10 mm diameter (d) 12 mm diameter
Last Answer : (b) 8 mm diameter
Description : Plywood is obtained by gluing wooden sheets at (A) 100 to 150 N/cm2 (B) 100 to 130°C (C) Both (A) and (B) (D) Neither (A) nor (b)
Last Answer : Answer: Option C
Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°
Last Answer : Answer: Option A
Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets
Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°
Last Answer : Answer: Option D
Description : The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness
Description : Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above
Description : A normally consolidated clay settled 10 mm when effective stress was increased from 100 kN/m² to 200 kN/m². If the effective stress is further increased from 200 kN/m² to 400 kN/m², then the settlement of the same clay is (A) 10 mm (B) 20 mm (C) 40 mm (D) None of the above
Last Answer : (A) 10 mm
Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above
Description : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F
Last Answer : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its ... from the surface of the wire before it turns back.
Description : Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm. (A) 10 (B) 20 (C) 30 (D) 40
Last Answer : (D) 40
Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm
Last Answer : d) 2.0 kJ/mm
Description : The laminations of the armature of a D.C. machine are usually _____ thick. (a) 0.1 to 0.2 mm (b) 0.2 to 0.3 mm (c) 0.3 to 0.4 mm (d) 0.4 to 0.5 mm
Last Answer : (d) 0.4 to 0.5 mm
Description : A T-section beam having flange 180mm wide and 20 mm thick and web 150 mm long and 20 mm thick carries a udl of 80 kN/m over an effective span of 8 m. Calculate the maximum bending stress.
Last Answer : Solution :
Description : I am trying to construct a giant book made with plywood for the corner of a children's room. How should I go about constructing the binding/support for the book to stay standing, and also be able to open the book 90 degrees?
Last Answer : Maybe an internal metal frame, and the moving parts rested on wheels.
Description : What kind of wood and plywood used in home decor?
Last Answer : Well, thanks to the growth of the wood and plywood industry, that the answer to this question What kind of wood and plywood used in home decor?' cannot have one single answer. Amulya Mica being ... , the selection depends on you will be using the plywood in future for home décor purpose.In Plywood
Description : Which is the best plywood for interior work in India?
Last Answer : There are many plywood manufacturing companies in India. The variety makes it tough for consumers to make a final choice. Thus, we would use this space to jot the distinguishing factors of plywood ... Mica ply is strong. The strength is evenly and well distributed across the body of the furniture
Description : How is premium plywood different from cheap plywood?
Last Answer : Premium plywood is much more different than cheap plywood. The materials involved in making cheap plywood are boards sawn and hewn from trees. Whereas, premium plywood is laminated through the multiple ... Sydney where the weather remains hot and humid. The cheaper plywood of Sydney might ruin a
Description : spare saw blade
Last Answer : Need Answer
Description : Can rotary tool be use to cut plywood?
Last Answer : yes, with a flex-shift attachment
Description : Is plywood absorbent?
Last Answer : Feel Free to Answer
Description : What is the verb and adverb for this following sentence Carefully Dan nailed the plywood to the top of the dresser?
Last Answer : carefully = adverbnailed = past tense verb
Description : I am putting a small pool in our basement. Would it be better to use pressure treated plywood as a ceiling, or sheet rock?
Last Answer : Definitely the plywood.
Description : How many square meters in a 4 x 8 plywood?
Last Answer : 2.973 square meters
Description : Write any four uses of plywood.
Last Answer : Uses of plywood: i) Plywood is used for preparing door panels and shutters of cup boards. ii) It is used for false ceilings for interior designing . iii)For making chairs, tables ,and other ... paneling of walls vi) For railway coaches vii) For formwork for concrete. viii) For packing cases.
Description : Benefits of birch plywood
Last Answer : Benefits of birch plywood Plywood is a well-known, readily available, and beloved building material by both professionals and home craftsmen. But there are a number of special requirements for the ... paint, it is important to take into account that cracks can sometimes form on any veneer.
Description : What wood is plywood mostly made from
Last Answer : Birch
Description : When measuring the blood pressure in each of the patient's arms, the nurse recognizes that in the normal adult, the pressures a) differ no more than 5 mm Hg between arm pressures. Normally, in ... . The left arm pressure is not anticipated to be higher than the right as a normal anatomical variant.
Last Answer : a) differ no more than 5 mm Hg between arm pressures. Normally, in the absence of disease of the vasculature, there is a difference of no more than 5 mm Hg between arm pressures.
Description : Pick out the wrong statement. (A) For a pressure vessel to be classified as 'thin vessel', the ratio of wall thickness to mean radius is less than 0.1 (B) For calculating forces and ... Maximum diameter of the opening provided in a pressure vessel, which does not require any compensation is 200 mm
Last Answer : Option B
Description : A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is (A) 100 years (B) 120 years (C) 140 years (D) 160 years
Description : A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these
Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3
Last Answer : (B) 0.94 m3
Description : Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced
Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick
Description : Bullet proof glass is made of thick glass sheet sandwiched by a layer of (A) Steel (B) Stainless steel (C) High test plastic (D) Chromium plate
Description : Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood
Description : To construct a 10 cm thick partition wall, you will prefer (A) English bond (B) Flemish bond (C) Header bond (D) Stretcher bond
Description : While investigating the site, a thick layer of fairly firm clay over a deep layer of soft clay is encountered. In such a situation, the following type of foundation is useful: (A) Pile formation (B) Raft foundation (C) Grillage foundation (D) None of these
Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above
Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above
Description : Low heat cement is used in (a) Thin structures (b) Thick structures (c) Sea structures (d) Submarine structures
Last Answer : (b) Thick structures
Description : Such wells (Unlined) are constructed normally in areas.......a. Where the water table is low c. Where the farmer is affluent available.
Last Answer : b. Where the water table is high.
Description : Callendar Hamilton spans are normally available maximum up to a) 60 ft. b) 100 ft. c) 150 ft. d) 200 ft.*
Last Answer : d) 200 ft.*
Description : In Dry farming, what is the annual rainfall (in mm) available? a. A Less than 550 mm b. B Less than 500 mm c. C Less than 950 mm d. D Less than 750 mm
Last Answer : d. D Less than 750 mm
Description : In concrete compression test, normally 150mmx150mmx150mm concrete cube samples is used for testing. Why isn’t 100mmx100mmx100mm concrete cube samples used in the test instead of 150mmx150mmx150mm concrete cube samples?
Last Answer : Basically, the force supplied by a concrete compression machine is a definite value. For normal concrete strength application, say below 50MPa, the stress produced by a ... cube size of 150mmx150mmx150mm is already sufficient for the crushing strength of the machine.
Description : In designing concrete structures, normally maximum aggregate sizes are adopted with ranges from 10mm to 20mm. Does an increase of maximum aggregate size benefit the structures?
Last Answer : To answer this question, let's consider an example of a cube. The surface area to volume ratio of a cube is 6/b where b is the length of the cube. This implies that ... requirement can offset the disadvantages brought about by discontinuities as suggested by Longman Scientific and Technical (1987).
Description : In bridge widening projects, the method of stitching is normally employed for connecting existing deck to the new deck. What are the problems associated with this method in terms of shrinkage of concrete?
Last Answer : In the method of stitching, it is a normal practice to construct the widening part of the bridge at first and let it stay undisturbed for several months. After that, concreting will then be ... Stitching refers to formation of a segment of bridge deck between an existing bridge and a new bridge.