Spalling hammer is used for (A) Driving wooden headed chisels (B) Rough dressing of stones (C) Carving of stones (D) Breaking small projection of stones

Spalling hammer is used for
(A) Driving wooden headed chisels
(B) Rough dressing of stones
(C) Carving of stones
(D) Breaking small projection of stones
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Description : Pick up the correct statement from the following: (A) Soft stones are required for carving (B) Light stones are required for arches (C) Hard stones are required to stand high pressure (D) All the above

Last Answer : Answer: Option D

The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as (A) Quarrying of stones (B) Blasting of stones (C) Seasoning of stones (D) Dressing of stones

Description : The preparation of surface of stone to obtain plain edges or to obtain stones of required size and shape is known as (A) Quarrying of stones (B) Blasting of stones (C) Seasoning of stones (D) Dressing of stones

Last Answer : Answer: Option D

Cross cut saw is used for (A) Cutting soft stones (B) Cutting hard stones (C) Cutting large blocks of stones (D) Dressing stones

Description : Cross cut saw is used for (A) Cutting soft stones (B) Cutting hard stones (C) Cutting large blocks of stones (D) Dressing stones

Last Answer : Answer: Option B

Jumper is a tool used for (A) Testing of stones (B) Quarrying of stones (C) Dressing of stones (D) None of the above

Description : Jumper is a tool used for (A) Testing of stones (B) Quarrying of stones (C) Dressing of stones (D) None of the above

Last Answer : Answer: Option B

All of the following items can be used in the maintenance of a D.C. propulsion motor's commutator EXCEPT _______________. A. a canvas wiper B. safety solvent C. abrasive dressing stones D. sandpaper

Description : All of the following items can be used in the maintenance of a D.C. propulsion motor's commutator EXCEPT _______________. A. a canvas wiper B. safety solvent C. abrasive dressing stones D. sandpaper

Last Answer : Answer: B

An iron hammer, lying in the sun, appears much hotter than its wooden handle because (a) iron is at a higher temperature (b) iron is darker than wood (c) iron absorbs more heat (d) iron is a good conductor of heat

Description : An iron hammer, lying in the sun, appears much hotter than its wooden handle because (a) iron is at a higher temperature (b) iron is darker than wood (c) iron absorbs more heat (d) iron is a good conductor of heat

Last Answer : Ans:(d)

In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Maximum carbon content in any variety of steel can be upto 1.3%. Steel containing 0.4% Carbon is not used for making (A) Nuts (B) Bolts (C) Chisels

Description : Maximum carbon content in any variety of steel can be upto 1.3%. Steel containing 0.4% Carbon is not used for making (A) Nuts (B) Bolts (C) Chisels

Last Answer : (C) Chisels

Resistance to fusion of the refractory under a steady rising temperature condition is called (A) Spalling (B) Refractoriness (C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Resistance to fusion of the refractory under a steady rising temperature condition is called (A) Spalling (B) Refractoriness (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Refractoriness

Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Description : Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Last Answer : (A) Greater resistance to corrosion by slags

Cold chisel’s hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Description : Cold chisel’s hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel

Last Answer : (B) High carbon steel

The cold chisels are made by

Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing

Last Answer : The cold chisels are made by Forging 

you are stuck in a house you have four objects to use you have a wooden chair,a ladder a piano,and an axe. The axe is rubber What would you use to get out?? hint* you can't get out with breaking it and you can only pick one object. -Riddles

Description : you are stuck in a house you have four objects to use you have a wooden chair,a ladder a piano,and an axe. The axe is rubber What would you use to get out?? hint* you can't get out with breaking it and you can only pick one object. -Riddles

Last Answer : you use the piano KEYS!!!!!

Pick up the correct statement from the following: (A) Air lift pumps are generally used for pumping water from deep wells (B) Jet pumps are generally used for pumping water from small wells (C) The hydraulic ram works on the principle of water hammer (D) All the above

Description : Pick up the correct statement from the following: (A) Air lift pumps are generally used for pumping water from deep wells (B) Jet pumps are generally used for pumping water from small wells (C) The hydraulic ram works on the principle of water hammer (D) All the above

Last Answer : (D) All the above

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Description : Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Last Answer : Answer: Option C

My 2012 model Hyundai Elantra does come up with devastating rough idle after few hours of driving, please how do you solve this problem?

Description : My 2012 model Hyundai Elantra does come up with devastating rough idle after few hours of driving, please how do you solve this problem?

Last Answer : If thair is rough iddiling probelm check engine components then check actuator check sensor's plug's if Diesel clean the full egr system first diagonas properly then take any necessary action.

Name the finger like projection present in the wall of small intestine meant for absorp- tion?

Description : Name the finger like projection present in the wall of small intestine meant for absorp- tion?

Last Answer : Villi

Committee on Comprehensive Financial Services for Small Businesses and Low Income Households, headed by ________ recommended the formation of a new category of bank called payments bank. A. NR Madhawan Menon B. Bimal Jalan C. Nachiket Mor D. Y.H. Melagam E. None of the Above

Description : Committee on Comprehensive Financial Services for Small Businesses and Low Income Households, headed by ________ recommended the formation of a new category of bank called payments bank. A. NR Madhawan Menon B. Bimal Jalan C. Nachiket Mor D. Y.H. Melagam E. None of the Above

Last Answer : C. Nachiket Mor Explanation: Committee on Comprehensive Financial Services for Small Businesses and Low Income Households, headed by Nachiket Mor recommended the formation of a new category of bank called payments bank.

An external advisory committee headed by _______ evaluated the license applications for small finance banks. A. NR Madhawan Menon B. Usha Thorat C. Nachiket Mor D. Y.H. Melagam E. None of the Above

Description : An external advisory committee headed by _______ evaluated the license applications for small finance banks. A. NR Madhawan Menon B. Usha Thorat C. Nachiket Mor D. Y.H. Melagam E. None of the Above

Last Answer : B. Usha Thorat Explanation: An external advisory committee headed by Usha Thorat evaluated the license applications for small finance banks.

The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Description : The orthographical projection of a traverse leg upon the reference meridian, is known as (A) Departure of leg (B) Latitude to the leg (C) Co-ordinate of the leg (D) Bearing of the leg

Last Answer : (B) Latitude to the leg

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

The toe projection of foundation slabs is taken (A) As one third of the base (B) As one sixth of overall height of the wall (C) Equal to heel slab (D) Below ground surface

Description : The toe projection of foundation slabs is taken (A) As one third of the base (B) As one sixth of overall height of the wall (C) Equal to heel slab (D) Below ground surface

Last Answer : Answer: Option A

If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by (A) D = 0.00775 aP (B) D = 0.0775 aP (C) D = 0.07775 aP (D) D = 0.775 Pa

Description : If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by (A) D = 0.00775 aP (B) D = 0.0775 aP (C) D = 0.07775 aP (D) D = 0.775 Pa

Last Answer : Answer: Option A

If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads). (A) y = L - (l - ) (B) y = L/2 + (l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Description : If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed ... l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Last Answer : Answer: Option D

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

Depth of lean concrete bed placed at the bottom of a wall footing, is kept (A) 10 cm (B) 15 cm (C) Equal to its projection beyond wall base (D) Less than its projection beyond wall base

Description : Depth of lean concrete bed placed at the bottom of a wall footing, is kept (A) 10 cm (B) 15 cm (C) Equal to its projection beyond wall base (D) Less than its projection beyond wall base

Last Answer : Answer: Option C

The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called (A) Recessed pointing (B) Weather pointing (C) V-pointing (D) Tuck pointing

Description : The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called (A) Recessed pointing (B) Weather pointing (C) V-pointing (D) Tuck pointing

Last Answer : Answer: Option B

The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Description : The depth of concrete bed of the foundation depends upon (A) The projection of the concrete block beyond the footing over it (B) The upward soil pressure (C) The mix of the concrete (D) All the above

Last Answer : Answer: Option D

Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The maximum projection of each corbel course should be limited to a quarter brick at a time (C) The discontinuous corbels are used to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Description : Which one of the following activities is not correct as applicable to brick corbels? (A) The maximum projection of the corbel should not be more than the thickness of the wall (B) The ... to carry heavy concentrated loads (D) Stretcher bond is generally used for the construction of brick corbel

Last Answer : Answer: Option D

Do you enjoy carving pumpkins?

Description : Do you enjoy carving pumpkins?

Last Answer : Not the actual act. It’s hard work.

Does carving a pumpkin and scoooping out the seeds upset your stomach?

Description : Does carving a pumpkin and scoooping out the seeds upset your stomach?

Last Answer : answer:Maybe it's a combination of the smell and the way it sort of looks and feels like guts? It might be more subconscious, but it is like you're scooping guts out of a body. It can even look like ... it. And the way it feels is all gushy and gross. Personally I love it, I'm just theorizin'...

How should I fix this broken carving?

Description : How should I fix this broken carving?

Last Answer : I would use super glue, small drops hold stuff together really well. If it is really valuable have it professionally restored.

What to use to seal a wood carving?

Description : What to use to seal a wood carving?

Last Answer : You could oil the wood or use a polyurethane.I have used both on wood carvings I’ve done and acrylic paint for a bird carved from bassood.I do know someone that uses mineral oil and tung oil.I hope this helps :)

Are "carving pumpkins" different from the pumpkins that you eat?

Description : Are "carving pumpkins" different from the pumpkins that you eat?

Last Answer : As far as I'm aware of, there isn't. Scratch that. You can eat any pumpkin, but others will taste better. The bigger the pumpkin the worse it'll taste because of the sugar content. You can ... the smaller variety that are 3 to 6 pounds. site that explains it very well I learned something new today.

Wanna suggest a pumpkin carving pattern?

Description : Wanna suggest a pumpkin carving pattern?

Last Answer : A basic Jack O’Lantern

Can you cook and eat a carving pumpkin?

Description : Can you cook and eat a carving pumpkin?

Last Answer : Yes, but there are better pumpkins for cooking.

Pumpkin Carving?

Description : Pumpkin Carving?

Last Answer : eyes, nose, mouth, eyebrow, moustache maybe… lol

Is there a safe way to repair a jade carving and keep the value?

Description : Is there a safe way to repair a jade carving and keep the value?

Last Answer : Have it evaluated by a professional who specializes in fine jade carvings. If you could get at least three estimates, you will have a good example to judge.

what- Nathan is carving the letter N out of wood. Is he able to determine if the sides of the N are parallel (yes or no)?

Description : what- Nathan is carving the letter N out of wood. Is he able to determine if the sides of the N are parallel (yes or no)?

Last Answer : yes

Which is the best wood for carving?

Description : Which is the best wood for carving?

Last Answer : Butternut Wood is the best type of wood to start practice with carving for beginners. It has a nice blond, gold to dark brown color to it and it grains well, can be cut from all directions. ... . It is super soft, takes up polishes and oil smoothly, very lightweight so perfect for making furniture.

What is best wood for beginners carving?

Description : What is best wood for beginners carving?

Last Answer : basswood would be the best wood for beginners. Because it is very soft and has almost no grains. It is also inexpensive and malleable. It is been used for a century in woodworking. It is ... of some woodwinds, and electric basses and guitars. A file without content cannot be uploaded. basswood image

What did the Soviet government do when carving up Central Asia that has made the region potentially unstable?

Description : What did the Soviet government do when carving up Central Asia that has made the region potentially unstable?

Last Answer : Need answer

What is jems reaction to finding the soap carving?

Description : What is jems reaction to finding the soap carving?

Last Answer : He was shocked that the two carvings look like them

Is carving wax is a chemical or physical change?

Description : Is carving wax is a chemical or physical change?

Last Answer : Physical change. It is still wax, and can be uncarved by beingmelted and recast. Chemical changes cannot be undone withoutapplying energy.

Why is pumpkin carving or decorating a halloween tradition?

Description : Why is pumpkin carving or decorating a halloween tradition?

Last Answer : The story behind decorating pumpkins is a legendary myth. It is said that jack-o-lanterns kept the evil spirits away as they walked the earth on All Saints day.

Does Dollar General sell any stencils that can be usefule when carving pumpkins?

Description : Does Dollar General sell any stencils that can be usefule when carving pumpkins?

Last Answer : Dollar General does indeed sells stencils for pumpkin carving. In fact their entire store is geared towards Halloween merchandise in October and you must can find what you need.