Resistance to fusion of the refractory under a steady rising temperature condition is called (A) Spalling (B) Refractoriness (C) Both (A) & (B)(D) Neither (A) nor (B)

Resistance to fusion of the refractory under a steady rising temperature
condition is called
(A) Spalling
(B) Refractoriness
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(B) Refractoriness
by

Related questions

Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Description : Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Last Answer : (A) Greater resistance to corrosion by slags

Test specimen for determination of refractoriness under load (RUL) of a refractory is heated in a (A) Furnace employing neutral atmosphere (B) Carbon resistance furnace (C) Reducing atmosphere (D) Furnace employing negative pressure

Description : Test specimen for determination of refractoriness under load (RUL) of a refractory is heated in a (A) Furnace employing neutral atmosphere (B) Carbon resistance furnace (C) Reducing atmosphere (D) Furnace employing negative pressure

Last Answer : (B) Carbon resistance furnace

Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Mass velocity in case of steady flow and through a constant cross￾section conduit is independent of the (A) Temperature (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

A boy presses a side of a blue pencil to a side of a yellow pencil, holding both pencils vertically. One inch of the pressed side of the blue pencil, measuring from its lower end, is smeared with paint. The yellow pencil is held steady while the boy slides the blue pencil down 1 inch, continueing to press it against the yellow one. He returns the blue pencil to its former position, then again it slides down 1 inch. He continues until he has lowered the blue pencil 5 times and raised it 5 times- 10 moves in all.Supposed that during this time the paint neither dries nor diminishes in quantity. How many inches of each pencil will be sneared with paint after the tenth move? -Riddles

Description : A boy presses a side of a blue pencil to a side of a yellow pencil, holding both pencils vertically. One inch of the pressed side of the blue pencil, measuring from its lower end, is smeared ... in quantity. How many inches of each pencil will be sneared with paint after the tenth move? -Riddles

Last Answer : At the start, 1inch of the yellow pencil gets smeared with wet paint. As the blue pencil is moved downward, a second inch of the blue pencils smears a second inch of the yellow pencil. Each pair ... of moves will smear 5 inches. This together with the initial inch, makes 6 inches for each pencil.

The main aspect of 'casual research' is ____________ 1. necessary condition 2. sufficient condition 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Description : The main aspect of 'casual research' is ____________ 1. necessary condition 2. sufficient condition 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Last Answer : both 1 & 2

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Gas

Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b

Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Thermal conductivity of a conducting solid material depends upon its (A) Temperature (B) Porosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The main function of a muffle in the muffle furnace is to (A) Protect the charge from the effects of the products of combustion (B) Smooth out temperature inequalities on the combustion side of the muffle wall (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The main function of a muffle in the muffle furnace is to (A) Protect the charge from the effects of the products of combustion (B) Smooth out temperature inequalities on the combustion side of the muffle wall (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Adiabatic flame temperature of a fuel is dependent on the initial temperature of (A) Fuel (B) Air (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Adiabatic flame temperature of a fuel is dependent on the initial temperature of (A) Fuel (B) Air (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

The standard state of a gas (at a given temperature) is the state in which fugacity is equal to (A) Unity (B) Activity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The standard state of a gas (at a given temperature) is the state in which fugacity is equal to (A) Unity (B) Activity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Entropy of an ideal gas depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The internal energy of an incompressible fluid depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The internal energy of an incompressible fluid depends upon its (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heat capacities for the ideal gas state depend upon the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Facts means and include a) Any thing, state of things, or relation of things, capable of being perceived by the senses b) Any mental condition of which any person is conscious. c) Both the A and B d) Neither A nor B

Description : Facts means and include a) Any thing, state of things, or relation of things, capable of being perceived by the  senses b) Any mental condition of which any person is conscious. c) Both the A and B d) Neither A nor B

Last Answer : c) Both the A and B

When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Description : When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Last Answer : Answer: Option C

A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one element (s2) if δ(q, λ, b) is not empty then δ(q, c, b) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Last Answer : (C) both s1 and s2

Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fluid resistance to shear depends upon its (A) Rate of transfer of molecular momentum (B) Cohesion (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Slurry reactors are characterised by the (A) Lack of intraparticle diffusion resistance (B) Presence of two mobile phases (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Slurry reactors are characterised by the (A) Lack of intraparticle diffusion resistance (B) Presence of two mobile phases (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Spalling hammer is used for (A) Driving wooden headed chisels (B) Rough dressing of stones (C) Carving of stones (D) Breaking small projection of stones

Description : Spalling hammer is used for (A) Driving wooden headed chisels (B) Rough dressing of stones (C) Carving of stones (D) Breaking small projection of stones

Last Answer : Answer: Option B

Continuous exposure of ctecholaminesensitive cells and tissues to adrenergic agonists causes a progressive diminition in their capacity to respond, this phenomenon is called as (a) Refractoriness (b) Desensitization (c) Tachyphylaxis (d) All of the above

Description : Continuous exposure of ctecholaminesensitive cells and tissues to adrenergic agonists causes a progressive diminition in their capacity to respond, this phenomenon is called as (a) Refractoriness (b) Desensitization (c) Tachyphylaxis (d) All of the above

Last Answer : Ans: D

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Description : The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Last Answer : (C) Gibbs free energy

Which among the following is the condition to avoid separation of connected members? a. Force acting on the connected members should be negative b. Force acting on the connected members should be positive c. Force acting on the connected members should be neither positive nor negative d. None of the above

Description : Which among the following is the condition to avoid separation of connected members? a. Force acting on the connected members should be negative b. Force acting on the connected members should be ... acting on the connected members should be neither positive nor negative d. None of the above

Last Answer : a. Force acting on the connected members should be negative

Indicate the condition in which neither trimethoprim nor sulfamethoxazole alone are effective, but their combination cotrimoxazole is: A. Prostatitis B. Lymphogranuloma venereum C. Pneumocystis carinii pneumonia D. Bacillary dysentery

Description : Indicate the condition in which neither trimethoprim nor sulfamethoxazole alone are effective, but their combination cotrimoxazole is: A. Prostatitis B. Lymphogranuloma venereum C. Pneumocystis carinii pneumonia D. Bacillary dysentery

Last Answer : C. Pneumocystis carinii pneumonia

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

The following apply to use of spironolactone in CHF except: A. It is indicated only in NYHA class III/IV cases as additional drug to conventional therapy B. It affords prognostic benefit in severe heart failure over and above that afforded by ACE inhibitors C. It helps overcome refractoriness to diuretics D. It affords rapid symptomatic relief

Description : The following apply to use of spironolactone in CHF except: A. It is indicated only in NYHA class III/IV cases as additional drug to conventional therapy B. It affords prognostic benefit in ... by ACE inhibitors C. It helps overcome refractoriness to diuretics D. It affords rapid symptomatic relief

Last Answer : D. It affords rapid symptomatic relief

Summarize the properties of good ‘refractoriness’.

Description : Summarize the properties of good ‘refractoriness’. 

Last Answer : Good refractoriness  Refractoriness is a property at which a refractory will deform under its own load. The refractoriness is indicated by PCE (Pyrometric cone equivalent). It should be higher than the ... increase of load. The load bearing capacity of a refractory can be measured by RUL test. 

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum(C) Both ‘a’ & ‘b’(D) Neither ‘a’ nor ‘b

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive