Description : Calculate the weight of lime (CaO) obtained by heating 200 kg of 95% pure limestone `(CaCO_(3))` :
Last Answer : Calculate the weight of lime (CaO) obtained by heating 200 kg of 95% pure limestone `(CaCO_(3))` : A. 104.4 kg B. 105.4 kg C. 212.8 kg D. 106.4 kg
Description : Where to find a slaking?
Last Answer : Feel Free to Answer
Description : Slaking of lime results in the formation of (a) lime (b) quick lime (c) milk of lime (d) none of these
Last Answer : (c) milk of lime
Description : What is the common name of substance ̳X‘ (a) Slaking of lime (b) quick lime (c) both (a) and (b) (d) none of the above
Last Answer : (b) quick lime
Description : Define slaking of lime.
Last Answer : It is the process of chemical combination of quick lime with required quantity of water for killing the heat and getting into powder form for use.
Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ
Last Answer : (A) 3.6 V.W.Dr.ρ
Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above
Last Answer : Answer: Option D
Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these
Description : Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into ... (C) The sand stone with silicates resist a fire in a better way (D) All the above
Description : What is the theoretical bare minimum amount of time required to write a novel?
Last Answer : It depends on how fast you can type. At 140 wpm, you could write a novel in about 5 hours.
Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values
Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature
Description : Theoretical flame temperature of a fuel is that temperature which is attained, when the fuel is completely burnt 'using theoretical amount of air in (A) Air (B) Oxygen (C) Either (A) or (B) (D) Either (A) or (B) without gain or loss of heat
Last Answer : (D) Either (A) or (B) without gain or loss of heat
Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull
Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large
Description : Detention period of a settling tank is (A) Average theoretical time required for water to flow through the tank (B) Time required for flow of water to fill the tank fully (C) Average time for which water is retained in tank (D) All the above
Last Answer : (D) All the above
Description : Coefficient of contraction is the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Loss of head in the orifice to the head of water available at the exit of the ... available at the exit of the orifice (D) Area of jet at vena-contracta to the area of orifice
Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge
Last Answer : Answer: Option C
Description : The theoretical velocity of jet at vena contracta is (where H = Head of water at vena contracta) (A) 2gH (B) H × g) (C) 2g × H (D) 2gh)
Description : The theoretical stress-strain curve of the concrete in the Limit State design of structures is correspondingly reduced by the factor [ A ] 0.35 [ B ] 0.5 [ C ] 0.67 [ D ] 0.75
Last Answer : [ C ] 0.67
Description : Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm of potassium chloride is :
Last Answer : Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm ... : A. 8 B. 4 C. 3 D. 2
Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.
Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved
Description : 20. The coefficient of discharge is the ratio of theoretical discharge to the actual discharge through an orifice. A) True B) False
Last Answer : B
Description : Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above
Last Answer : Answer: Option A
Description : Compare the following giving reasons Acidic nature of oxides: `CaO, CO, CO_(2),N_(2)O_(5),SO_(3)`
Last Answer : Compare the following giving reasons Acidic nature of oxides: `CaO, CO, CO_(2),N_(2)O_(5),SO_(3)`
Description : Identify the type of reaction(s) in the following equations. (i)CH4 + 2O2 CO2 + 2 H2O (ii) Pb(NO3)2 + 2KI ——–>Pbl2 + 2KNOs (iii) CaO + H2O ——–> Ca(OH)2 (iv) CuSO4 + Zn ——–> ZnSO4 + Cu -Chemistry
Last Answer : Answer. (i) Combustion reaction and oxidation reaction. (ii)Double displacement reaction and precipitation reaction. (iii) Combination reaction. (iv) Displacement reaction.
Description : (a) Explain the formation of ionic compound CaO with electron dot structure. Atomic number of calcium and oxygen are 20 and 8 respectively. (b) Name the constituent metals of bronze. -Chemistry
Last Answer : (b) Bronze is made up of copper and tin
Description : How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), FeO, Cr_(2)O_(3), XeF_(4), Al_(2)O_(3), MgO
Last Answer : How many of the following liberate `O_(2)` on heating in a dry test tube ? `CaO, Fe_(2)O_(3), Fe_(3)O_(4), ... 3), XeF_(4), Al_(2)O_(3), MgO, Na_(2)O`
Description : For `CaCO_(3)(s)rarr CaO(s)+CO_(2)(g)` at `977^(@)C, Delta H = 174` KJ/mol , then `Delta E` is :-
Last Answer : For `CaCO_(3)(s)rarr CaO(s)+CO_(2)(g)` at `977^(@)C, Delta H = 174` KJ/mol , then `Delta E` is :- A. 160 KJ B. 163.6 KJ C. 186.4 KJ D. 180 KJ
Description : Among the following the number of compounds that can act as dehydrating agent are …… `Conc. H_(2)SO_(4),"Anhyd". CaCl_(2),Conc. HNO_(3), CaO, CuSO_(4)
Last Answer : Among the following the number of compounds that can act as dehydrating agent are `Conc. H_(2)SO_(4),"Anhyd" ... CaO, CuSO_(4).5H_(2)O, P_(2)O_(5)`
Description : What is the percent composition of calcium (Ca) in (CaO)?
Last Answer : 40 g / 56 g X 100%
Description : What is the percent composition of calcium ca in cao?
Last Answer : 40g/56g x 100%= 71.43 % - APEX
Description : How many atoms does CaO have?
Last Answer : What is the answer ?
Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product
Last Answer : (A) Of the better CaO/SiO2 balance for slag formation
Description : Considering the endothermic dissociation of CaCO3 in a closed vessel (CaCO3 ⇌ CaO + CO2 ), the pressure of CO2 increases, if (A) A catalyst is added (B) The temperature is increased (C) An inert gas is pumped keeping the temperature constant (D) None of these
Last Answer : (B) The temperature is increased
Description : Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3
Last Answer : (B) CO2 escapes continuously
Description : In case of calcination of limestone, CaCO3 CaO + CO2 , the addition of more of CaO will result in __________ in the concentration of CO2 . (A) No change (B) Increase (C) Decrease (D) Unpredictable from the data
Last Answer : (A) No change
Description : Calcium acetate on strong heating gives (a) Methane + CaCO3 (b) Ethane + CaCO3 (c) Acetone + CaCO3 (d) Ethane + CaO
Last Answer : Acetone + CaCO3
Description : CaO is called (A) Quick lime (B) Slaked lime (C) Limestone (D) Calcite
Last Answer : (A) Quick lime
Description : Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS
Last Answer : (C) ZnO
Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O
Last Answer : (A) CaO, SiO2 , Al2O3
Description : Pick out the wrong statement. (A) Hard glass which is used for making laboratory glass wares is a mixture of sodium borosilicate and aluminium borosilicate (B) Glass is decolorized during its manufacture by ... Na2O . CaO . 6SiO2 (D) Red color is imparted to glass by addition of arsenic oxide
Last Answer : (D) Red color is imparted to glass by addition of arsenic oxide
Description : Portland cement consists mainly of (A) CaO & SiO2 (B) SiO2 & Al2O3 (C) CaO & Al2O3 (D) CaO & Fe2O3
Last Answer : (A) CaO & SiO2
Description : Pick out the endothermic reaction out of the following. (A) C+ ½O2 = CO (B) CO + 3H2 = CH4 + H2O (C) CaCO3 = CaO + CO2 (D) CO + ½O2 = CO2
Last Answer : (C) CaCO3 = CaO + CO2
Description : Which of the following is the second major component of cement? (A) Al2O3 (B) SiO2 (C) CaO (D) Fe2O3
Last Answer : (B) SiO2
Description : Glass is (A) Mainly CaO (B) Subjected to galvanising (C) A super cooled liquid (D) All (A), (B) and (C)
Last Answer : (C) A super cooled liquid
Description : Which of the following may be viewed as a catalyst in the manufacturesoda ash by Solvay process? (A) NH3 (B) NaCl (C) CaO (D) Coke
Last Answer : (A) NH3
Description : Blue colour is imparted to glass by the addition of (A) FeSO4 (B) PbO (C) CaO (D) NaOH
Last Answer : (C) CaO
Description : Which of the following is an acidic constituent of B.F. slag? (A) SiO2 (B) FeO (C) MgO (D) CaO
Last Answer : Option A
Description : Survey of the major projects is done by (a) Chief Engineer (b) Chief Administrative Officer (CAO) construction* (c) Divisional Railway Manager (d) Railway Board
Last Answer : (b) Chief Administrative Officer (CAO) construction*
Description : Which raw material is used to impart colour to the glass? a) Al2O3 b) CoO c) CaO d) MgO
Last Answer : b) CoO