Detention period of a settling tank is 

(A) Average theoretical time required for water to flow through the tank 

(B) Time required for flow of water to fill the tank fully 

(C) Average time for which water is retained in tank 

(D) All the above

1 Answer

Answer :

(D) All the above

Related questions

Description : The detention time (t) of a settling tank, may be defined as the time required for A. A particle to travel along its length B. A particle to travel from top surface to bottom sludge zone C. The flow of sewage to fill the tank D. None of these

Last Answer : ANS: C

Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Last Answer : ANS: D

Description : The width of a settling tank with 2 hour detention period for treating sewage 378 cu m per hour, is A. 5 m B. 5.5 m C. 6.5 m D. 7 m

Last Answer : ANS: D

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

Description : For a grit chamber, if the recommended velocity of flow is 0.2 m/sec and detention period is 2 minutes, the length of the tank, is A. 16 m B. 20 m C. 24 m D. 30 m

Last Answer : ANS: C

Description : The efficiency of sedimentation tank does not depend upon  (A) Depth of tank  (B) Length of tank  (C) Detention period  (D) Velocity of water

Last Answer : (D) Velocity of water

Description : The detention period in a septic tank is assumed (A) 20 minutes (B) 25 minutes (C) 30 minutes (D) 40 minute

Last Answer : (C) 30 minutes

Description : The flow of water gets retarded, in (A) Settling tank (B) Sedimentation tank (C) Clarifier (D) All the above

Last Answer : (D) All the above

Description : Flow through period, in sedimentation tanks, is  (A) Equal to detention period  (B) More than detention period  (C) Less than detention period  (D) Detention period divided by displacement efficiency 

Last Answer : (C) Less than detention period 

Description : The ratio of discharge and plan area of a continuous flow type settling tank, is known (A) Surface loading (B) Overflow (C) Overflow rate (D) All the above

Last Answer : (D) All the above

Description : In a sedimentation tank, the detention period for water ranges from __________ hours. (A) 2 to 4 (B) 8 to 12 (C) 16 to 20 (D) 24 to 32

Last Answer : (A) 2 to 4

Description : Pick up the correct statement from the following:  (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours  (B) Detention period for sedimentation tanks, using coagulants usually ... in sedimentation tanks, is generally limited to 0.3 m/minute  (D) All the above

Last Answer : (D) All the above

Description : Detention time for plain sedimentation tank usually ranges from (A) 2 to 4 hours (B) 4 to 8 hours (C) 6 to 10 hours (D) 8 to 12 hours

Last Answer : (B) 4 to 8 hours

Description : A tank is filled by 3 taps K, L and M with uniform flow. The second tap L takes 3 times the time taken by K to fill the tank, while M takes two times the time taken by L to fill the tank. If all ... hours, find the time required by tap K alone to fill the tank. A) 10hrs B) 21hrs C) 14hrs D) 22hrs

Last Answer : B 1/x + 1/ (3x) + (1/6x) = 1/14 9/6x= 1/14 6x/9 = 14 6x=126 X=126/6 X=21

Description : If L, B and D length, breadth and depth of water in a rectangular sedimentation tank of total  discharge Q, the settling velocity, is  (A) Q/H (B) Q/D (C) Q/(D × B)  (D) Q/(L × B) 

Last Answer : (D) Q/(L × B) 

Description : In detritus tanks, A. Flow velocity is kept 0.09 m/sec B. Detention period is kept 3 to 4 minutes C. Organic and inorganic materials are separated D. All the above

Last Answer : ANS: D

Description : In case of Imhoff tanks, A. The shape is rectangular B. Detention period is 2 hours C. The velocity of flow is restricted to 0.30 m/minute D. All the above

Last Answer : ANS: D

Description : In a grit chamber of a sewage treatment plant, A. Flow velocity 0.15 m to 0.3 m/sec is kept B. Depth of 0.9 m to 1.20 m is kept C. One minute of detention period is kept D. All the above

Last Answer : ANS: D

Description : Pick up the incorrect statement from the following: A. Septic tanks are horizontal continuous flow type of sedimentation tanks B. Septic tanks are generally provided a detention period of 12 to 36 hours C ... covered and high vent shafts are provided for the escape of foul gases D. None of these

Last Answer : ANS: D

Description : The detention period for plain sedimentation water tanks, is usually  (A) 4 to 8 hours  (B) 8 to 16 hours  (C) 16 to 24 hours  (D) 24 to 36 hours

Last Answer : (D) 24 to 36 hours

Description : The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is A. d² (0.011d + 0.785H)/Q B. d (0.022d + 0.085H)/Q C. d (0.785d + 0.011H)/Q D. d (0.285d + 0.011H)/Q

Last Answer : ANS: A

Description : The term reactor referred to in waste water treatment is – (1) Vessel (2) Settling tank (3) Clarifier (4) Aeration tank

Last Answer : (4) Aeration tank Explanation: Reactors are industrial processing tanks for the treatment of wastewater. The tanks have a "flow through" system, with raw wastewater (influent) coming in at one end and ... out the other. While one tank is in settle/ decant mode the other is aerating and filling.

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Description : The term reactor referred to in waste water treatment is (1) Vessel (2) Settling tank (3) Clarifier (4) Aeration tank

Last Answer : Aeration tank

Description : In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is A. Q/(B × D) B. Q/(L × D) C. Q/L D. Q/(B × L)

Last Answer : ANS: D

Description : Gravity settling process is not involved in the working of a (A) Hydrocyclone (B) Classifier (C) Dorr-thickener (D) Sedimentation tank

Last Answer : (A) Hydrocyclone

Description : A shallow pond in which the sewage is retained and biologically treated is called (A) Oxidation (B) Imhoff tank (C) Lagoon (D) Skimming tank

Last Answer : (A) Oxidation

Description : The detention period for plain sedimentation water tanks, is usually A. 4 to 8 hours B. 8 to 16 hours C. 16 to 24 hours D. 24 to 36 hours

Last Answer : ANS: A

Description : Cd , Cc and Cv are related (for flow through an orifice) as (where, Cd = discharge co-efficient, Cc = co-efficient of contraction = (area of jet at vena￾contracta/area of opening), Cv = co-efficient of velocity = (actual velocity ... A) Cd = Cc /Cv (B) Cd = Cc .Cv (C) Cd = Cv / Cc (D) None of these

Last Answer : (B) Cd = Cc .Cv

Description : The Constitution allows preventive detention but stipulates: (1) that no one should be detained beyond three months unless an Advisory Board authorizes detention beyond that period (2) that the grounds for ... nearest magistrate within a period of 24 hours of his arrest (4) All of the above

Last Answer : (1) that no one should be detained beyond three months unless an Advisory Board authorises detention beyond that period Explanation: Article 22 (4) provides that no law providing for preventive detention ... said period of 3 months that there is in it's opinion sufficient cause for such detention.

Description : The recommended detention period for grit chambers is A. 1 minute B. 2 minutes C. 3 minutes D. 5 minutes

Last Answer : ANS: A

Description : In sewage treatment, the detention period allowed for oxidation ponds ranges from __________ weeks. (A) 1 to 2 (B) 4 to 5 (C) 9 to 10 (D) 15 to 20

Last Answer : (B) 4 to 5

Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm

Last Answer : Answer: Option D

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge

Last Answer : Answer: Option C

Description : 20. The coefficient of discharge is the ratio of theoretical discharge to the actual discharge through an orifice. A) True B) False

Last Answer : B

Description : Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above

Last Answer : Answer: Option A

Description : A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Last Answer : (A) Fluid flow control is required

Description : The original colour of beverages for longer period are retained by

Last Answer : Ans. Benzoic acid

Description : In preparing closing entries a. each revenue account will be credited. b. each expense account will be credited. c. the retained earnings account will be debited if there is net income for the period. d. the dividends account will be debited.

Last Answer : b. each expense account will be credited.

Description : Closing entries are made a. in order to terminate the business as an operating entity. b. so that all assets, liabilities, and Stockholders' equity accounts will have zero balances when the ... ) and dividends to the retained earnings account. d. so that financial statements can be prepared.

Last Answer : c. in order to transfer net income (or loss) and dividends to the retained earnings account. unt.

Description : Types of oscilloscopes that are able to retain the display for a longer period of analysis. This display is retained by the use of flood gun.

Last Answer : storage oscilloscope

Description : The main factor which affects the infiltration capacity, is (A) Thickness of saturated layer (B) Depth of surface detention (C) Soil moisture (D) All the above

Last Answer : Answer: Option D

Description : The infiltration capacity during rain storm, is considerably reduced due to (A) Surface detention (B) Soil moisture (C) Compaction due to rain (D) All the above

Last Answer : Answer: Option D

Description : A cistern is filled by three faucets with uniform flow. The first two faucets operating simultaneously fill the cistern in the same during which the cistern is filled by the third faucet alone. The second faucet fills the cistern ... by the first faucet is? A) 6 hrs B) 10 hrs C) 15 hrs D) 30 hrs

Last Answer : C Suppose, first faucet alone takes x hours to fill the cistern. Then, second and third faucets will take (x - 5) and (x - 9) hours respectively to fill the cistern. 1/x + 1/(x - 5) = 1/(x - 9) (2x - 5)(x - 9) = x(x - 5) x2 - 18x + 45 = 0 (x- 15)(x - 3) = 0 => x = 15

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

Description : Which one is more appropriate for cost of retained earning? A. Weighted Average cost of capital B. Opportunity cost to the firm C. Expected rate of return by the investor D. None of the above

Last Answer : B. Opportunity cost to the firm