The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is (A) 1 (B) 2 (C) 3 (D) 4

The maximum quantity of calcium chloride used as an accelerator in cement in percentage by
weight of cement is
(A) 1
(B) 2
(C) 3
(D) 4
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Description : Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Last Answer : (D) Both (b) and (c)

Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Description : Setting time of cement increases by adding (A) Gypsum (B) Hydrogen peroxide (C) Calcium chloride (D) Sodium oxide

Last Answer : Answer: Option A

The most commonly used retarder in cement is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Description : The most commonly used retarder in cement is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Last Answer : Answer: Option A

Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Setting time of cement increases by adding (i)gypsum (ii)sodium oxide (iii)calcium chloride [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ A ] i

For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Description : For maximum strength and durability minimum percentage of cement, by weight is (A) 15 % (B) 20 % (C) 25 % (D) 30 %

Last Answer : Answer: Option D

Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option A

Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Description : Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is (A) 28 liters (B) 30 liters (C) 32 liters (D) 34 liters

Last Answer : Answer: Option C

The maximum quantity of aggregate per 50kg of cement should not axceed. (a) 100kg (b) 200kg (c) 350kg (d) 450kg

Description : The maximum quantity of aggregate per 50kg of cement should not axceed. (a) 100kg (b) 200kg (c) 350kg (d) 450kg

Last Answer : (d) 450kg

For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 k

Description : For a concrete mix 1:3:6 and water cement ratio 0.6 both by weight, the quantity of water required per bag, is (A) 10 kg (B) 12 kg (C) 14 kg (D) 16 kg

Last Answer : Answer: Option C

For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) 5% by weight of aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

Description : For preparing ordinary concrete, the quantity of water used, is (A) 5% by weight of aggregates plus 20% of weight of cement (B) 10% by weight of aggregates plus 10% of weight of cement (C) ... aggregates plus 30% of weight of cement (D) 30% by weight of aggregates plus 10% of weight of cement

Last Answer : Answer: Option C

The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Description : The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Last Answer : Answer: Option D

Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Description : Which of the following cements contains maximum percentage of dicalcium silicate? (A) Ordinary Portland cement (B) Low heat cement (C) Rapid hardening cement (D) Sulphate resisting cement

Last Answer : Answer: Option B

The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The maximum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ C ] Lime

Cement paints usually (A) Contain hydrated lime (B) Contain 5% to 10% colour pigments (C) Contain 5% sodium chloride (D) All the above

Description : Cement paints usually (A) Contain hydrated lime (B) Contain 5% to 10% colour pigments (C) Contain 5% sodium chloride (D) All the above

Last Answer : Answer: Option D

The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Description : The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Last Answer : [ D ] carbonation

The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Description : The reduction of the PH value, by the action of atmospheric carbon dioxide with the alkali of the cement paste is called [ A ] atmospheric corrosion [ B ] chloride corrosion [ C ] oxidation [ D ] carbonation

Last Answer : [ D ] carbonation

For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3

Description : For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is (A) 0.90 m3 (B) 0.94 m3 (C) 0.98 m3 (D) 1.00 m3

Last Answer : (B) 0.94 m3

For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Description : For 12 mm thick cement plastering 1 : 6 on 100 sq.m new brick work, the quantity of cement required, is (A) 0.200 m3 (B) 0.247 m3 (C) 0.274 m3 (D) 0.295 m

Last Answer : (C) 0.274 m3

Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Description : Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Last Answer : Option D

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by the cement paste (C) Volume of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Description : In the method of voids for determination of the quantity of cement paste, it is assumed that (A) Voids in coarse aggregates are filled by fine aggregates (B) Voids in fine aggregates are filled by ... of fine aggregates is equal to total voids in coarse aggregates plus 10% extra (D) All the above

Last Answer : Answer: Option D

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement

Description : Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement

Last Answer : Answer: Option D

The minimum quantity of cement to be used in controlled concrete is (a) 120kg/cm2 (b) 160 kg/cm2 (c) 220 kg/cm2 (d) 280 kg/cm2

Description : The minimum quantity of cement to be used in controlled concrete is (a) 120kg/cm2 (b) 160 kg/cm2 (c) 220 kg/cm2 (d) 280 kg/cm2

Last Answer : (c) 220 kg/cm2

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Was an accelerator an original component of the internal combustion engine?

Description : Was an accelerator an original component of the internal combustion engine?

Last Answer : No and it still isn’t. Look up the definition.

Would exercise in a gravity force accelerator be fun?

Description : Would exercise in a gravity force accelerator be fun?

Last Answer : Why not, sounds likes loads of fun, I bet imbibing in a little happy herb would make it really zen. lol Aaaah…float grasshopper, float.

Can we make non-superheavy elements in a particle accelerator?

Description : Can we make non-superheavy elements in a particle accelerator?

Last Answer : answer:Right? I don't know if it's quite practical with the design of the current equipment as it is made to take singular fundamental particles within atoms, smash them together, and see what the littler ... in the heart of a star or via supernova-soooo, you're pretty much made of star-metal.

What happens when you put a compound into a particle accelerator?

Description : What happens when you put a compound into a particle accelerator?

Last Answer : The molecules would need to be ionized in order to be accelerated. A proton, positron or electron hitting a molecule in even a small and weak particle accelerator would blow it into individual ionized atoms and/or smaller ionized molecules.

When the heat is very hot, my accelerator pedal and nothing stops responding and the speed and speed slowly slow down

Description : The engine does not shut down. I'll go through and fuck it again. Thank you

Last Answer : Need Answer

can you adjust the angle of an auto accelerator pedal?

Description : can you adjust the angle of an auto accelerator pedal?

Last Answer : Need Answer

What is the purpose of a particle accelerator?

Description : What is the purpose of a particle accelerator?

Last Answer : The main purpose of a particle accelerator is to generate synchrotron radiation or to smash atomic nuclei together or into a target to see what is produced from the energy of the ... inform which theoretical physical models are incorrect and occasionally which models have a valid experimental basis.

What is the purpose of accelerator governer?

Description : What is the purpose of accelerator governer?

Last Answer : The purpose of accelerator governer is to cut of steam momentarily when large electrical loads are taken to prevent turbine speeding up. 

Interaction of Multiplier and accelerator is known as (a) Investment Multiplier (b) Employment Multiplier (c) Super Multiplier (d) Dynamic Multiplier

Description : Interaction of Multiplier and accelerator is known as (a) Investment Multiplier (b) Employment Multiplier (c) Super Multiplier (d) Dynamic Multiplier

Last Answer : (c) Super Multiplier

If an increase in investment leads to a bigger increase in national income (a) Accelerator (b) Aggregate demand © Monetarism (d) Multiplier

Description : If an increase in investment leads to a bigger increase in national income (a) Accelerator (b) Aggregate demand © Monetarism (d) Multiplier

Last Answer : (d) Multiplier

A color television set employs a 25,000 volt electron accelerator to produce the picture and potentially harmful radiation which must be shielded against. The main component of this radiation consists of w) electrons which penetrate the picture tube x) soft x-rays y) microwaves z) ultraviolet radiation

Description : A color television set employs a 25,000 volt electron accelerator to produce the picture and potentially harmful radiation which must be shielded against. The main component of this radiation consists ... which penetrate the picture tube x) soft x-rays y) microwaves z) ultraviolet radiation 

Last Answer : ANSWER: X -- SOFT X-RAYS

Hardness of water can be removed by boiling if it is due to (A) Calcium bicarbonates (B) Calcium sulphates (C) Calcium chloride (D) Calcium nitrates

Description : Hardness of water can be removed by boiling if it is due to  (A) Calcium bicarbonates  (B) Calcium sulphates  (C) Calcium chloride  (D) Calcium nitrates 

Last Answer : (A) Calcium bicarbonates 

The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Description : The most commonly used admixture which prolongs the setting and hardening time is (A) Gypsum (B) Calcium chloride (C) Sodium silicate (D) All of the above

Last Answer : (A) Gypsum

The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : (B) (i) and (iv)

Workability improved by adding (A) Fly ash (B) Hydrated lime (C) Calcium chloride (D) All the above

Description : Workability improved by adding (A) Fly ash (B) Hydrated lime (C) Calcium chloride (D) All the above

Last Answer : Answer: Option D

Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Description : Select the incorrect statement (A) Lean mixes bleed more as compared to rich ones. (B) Bleeding can be minimized by adding pozzolana finer aggregate (C) Bleeding can be increased by addition 'of calcium chloride (D) None of the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime is available in Free State (B) Lime is available by dissolving calcium carbonate in water (C) Lime is available by calcining calcium carbonate at 900°C (D) Lime is nothing but calcium chloride

Description : Pick up the correct statement from the following: (A) Lime is available in Free State (B) Lime is available by dissolving calcium carbonate in water (C) Lime is available by calcining calcium carbonate at 900°C (D) Lime is nothing but calcium chloride

Last Answer : Answer: Option C

The most common admixture which is used to accelerate the initial set of concrete is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Description : The most common admixture which is used to accelerate the initial set of concrete is (A) Gypsum (B) Calcium chloride (C) Calcium carbonate (D) None of the above

Last Answer : Answer: Option B

The workability of concrete can be improved by adding (a) Hydrated lime (b) Fly ash (c) Calcium chloride (d) All the above

Description : The workability of concrete can be improved by adding (a) Hydrated lime (b) Fly ash (c) Calcium chloride (d) All the above

Last Answer : (d) All the above

Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Description : Di-calcium silicate (C2S) (A) Hydrates rapidly (B) Generates less heat of hydration (C) Hardens rapidly (D) Provides less ultimate strength to cement

Last Answer : Answer: Option B

The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B