Was an accelerator an original component of the internal combustion engine?

Was an accelerator an original component of the internal combustion engine?
by

1 Answer

Answer :

No and it still isn’t. Look up the definition.
by

Related questions

The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 %

Description : The heat exhaust of an automobile with an internal combustion engine represents approximately what percent of the energy of the original fuel? w) 10 % x) 50 % y) 35 % z) 5 % 

Last Answer : ANSWER: Y -- 35 % 

A color television set employs a 25,000 volt electron accelerator to produce the picture and potentially harmful radiation which must be shielded against. The main component of this radiation consists of w) electrons which penetrate the picture tube x) soft x-rays y) microwaves z) ultraviolet radiation

Description : A color television set employs a 25,000 volt electron accelerator to produce the picture and potentially harmful radiation which must be shielded against. The main component of this radiation consists ... which penetrate the picture tube x) soft x-rays y) microwaves z) ultraviolet radiation 

Last Answer : ANSWER: X -- SOFT X-RAYS

Can you describe the process by which a modern internal combustion automobile engine is designed?

Description : Can you describe the process by which a modern internal combustion automobile engine is designed?

Last Answer : Well, I say it’s designed to function as certain shape to fit a certain area, once that’s all worked out it does this

In the quest for a clean, fuel-efficient engine,why hasn't this technology,EVC,been implemented in today's modern internal combustion engine?

Description : In the quest for a clean, fuel-efficient engine,why hasn't this technology,EVC,been implemented in today's modern internal combustion engine?

Last Answer : answer:Oh this is near and dear to my heart. I had the misfortune of actually doing this analysis for my employer about 10 years ago. Virtually every manufacturer has built and tested units like this. ... is hard for customers to justify the purchase. Believe me if they could sell it, they would.

How would you wish to travel if the internal combustion engine were a figment of our imagination?

Description : How would you wish to travel if the internal combustion engine were a figment of our imagination?

Last Answer : Jaunting! (Like in Alfred Bester’s book “The Stars My Destination.”) Teleportation is cool!

Who patents the internal combustion Engine?

Description : Who patents the internal combustion Engine?

Last Answer : Samuel Morey.

What does cc stand for in a internal combustion engine?

Description : What does cc stand for in a internal combustion engine?

Last Answer : Feel Free to Answer

If the temperature of intake air in internal combustion engine is lowered, the efficiency will a. increase b. decrease c. remains same d. increases upto certain limit and then decrease

Description : If the temperature of intake air in internal combustion engine is lowered, the efficiency will a. increase b. decrease c. remains same d. increases upto certain limit and then decrease

Last Answer : ANSWER a. increase

Thermal efficiency of an internal combustion engine on weak mixture is a. higher b. lower c. unaffected d. unpredictable

Description : Thermal efficiency of an internal combustion engine on weak mixture is a. higher b. lower c. unaffected d. unpredictable

Last Answer : ANSWER a. higher

The efficiency of a internal combustion engine normally is of the order of a. 15-20 % b. 20-25% c. 25-30% d. 30-35%

Description : The efficiency of a internal combustion engine normally is of the order of a. 15-20 % b. 20-25% c. 25-30% d. 30-35%

Last Answer : ANSWER d. 30-35%

The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Description : The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Last Answer : ANSWER b. 1-3-4-2

If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Description : If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Last Answer : ANSWER b. decrease

Which of the following is not an internal combustion engine? a. petrol engine b. steam turbine c. diesel engine d. gas turbine

Description : Which of the following is not an internal combustion engine? a. petrol engine b. steam turbine c. diesel engine d. gas turbine

Last Answer : ANSWER b. steam turbine

Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Description : Use of gasoline blend like tetraethyl lead in internal combustion engine a. increases the octane rating of the fuel b. allows engine to operate at higher compression ratio c. avoids auto-ignition of fuel d. all of the above

Last Answer : ANSWER d. all of the above

An emergency generator, driven by an internal combustion engine, shall be tested under load for a minimum of 2 hours at least once every _____________. A. week B. 2 weeks C. month D. 3 months

Description : An emergency generator, driven by an internal combustion engine, shall be tested under load for a minimum of 2 hours at least once every _____________. A. week B. 2 weeks C. month D. 3 months

Last Answer : Answer: C

Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Description : Name one or more sources of noise bearing on electronic communications. A. Steam boiler B. Galaxies C. Internal combustion engine D. Both B and C

Last Answer : D. Both B and C

Internal combustion engine was invented by

Description : Internal combustion engine was invented by

Last Answer : Rudolf Diesel and Nikolaus.

What are the advantages of internal combustion engine?

Description : What are the advantages of internal combustion engine?

Last Answer : a) The efficiency of internal combustion engine is greater then that of external combustion engine. b) It can be started immediately. c) It can be fitted into small machines

What is the disadvantage of internal combustion engine?

Description : What is the disadvantage of internal combustion engine?

Last Answer : Internal combustion engine causes more pollution as it produces exhaust gases like carbon monoxide, carbon dioxide and carbon particles.

Mention the types of internal combustion engine.

Description : Mention the types of internal combustion engine.

Last Answer : a) Petro engine b) Diesel engine

What is an internal combustion engine?

Description : What is an internal combustion engine?

Last Answer : A heat engine in which combustion of fuel takes place inside the cylinder of the engine is called internal combustion engine.Ex: Petrol engine, Diesel engine

Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction(B) Natural convection(C) Forced convection(D) None of these

Description : Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction (B) Natural convection (C) Forced convection (D) None of these

Last Answer : (B) Natural convection

For heavier fuels the cooling system of an internal combustion engine, the temperature is maintained at a) 78 to 80°C b) 80 to 84 °C c) 85 to 88°C d) 88 to 90°C

Description : For heavier fuels the cooling system of an internal combustion engine, the temperature is maintained at a) 78 to 80°C b) 80 to 84 °C c) 85 to 88°C d) 88 to 90°C

Last Answer : d) 88 to 90°C

. Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Description : . Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65 (D) 80

Last Answer : Option B

Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Description : Thermal efficiency of an internal combustion engine is around __________ percent. (A) 8 (B) 35 (C) 65

Last Answer : Option B

Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Description : Which of the following types of internal combustion engine is generally used as portable engine for pumping and electricity generation? 1. Spark ignition 2. Stationary 3. Vertical single cylinder 3. all of these

Last Answer : ans 2

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

In parallel hybrid vehicle Internal Combustion Engine and electric motor are coupled by a …………………..device. a. Hydraulic b. Pneumatic c. Mechanical d. Electric

Description : In parallel hybrid vehicle Internal Combustion Engine and electric motor are coupled by a …………………..device. a. Hydraulic b. Pneumatic c. Mechanical d. Electric

Last Answer : c. Mechanical

The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Description : The BAS mild hybrid system used………. To start the internal combustion engine. a. Belt drive b. Chain drive c. Direct drive d. None of the above.

Last Answer : a. Belt drive

_____ technology helps to stop a combustion engine when the vehicle pulls to a stop and restart it when driver accelerates. • Start stop technology • Passive braking technology • Regenerative braking technology • Internal cooling technology

Description : _____ technology helps to stop a combustion engine when the vehicle pulls to a stop and restart it when driver accelerates. • Start stop technology • Passive braking technology • Regenerative braking technology • Internal cooling technology

Last Answer : • Regenerative braking technology

Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Description : Which of the following best describes both Stirling and Ericson engines?  a. Internal combustion engine  b. External combustion engine  c. Diesel cycle  d. Rankine cycle

Last Answer : External combustion engine

Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Last Answer : Internal Combustion Engine

Define internal combustion engine

Description : Define internal combustion engine

Last Answer : Definition of I. C. engine: The I. C. engine means Internal combustion engine in which combustion i.e. burning of fuel in presence of air takes place inside the combustion chamber (closed volume). 

A four cycle internal combustion automobile engine operates on what kind of cycle? w) Rankine x) Otto y) Brayton z) Joule

Description : A four cycle internal combustion automobile engine operates on what kind of cycle? w) Rankine x) Otto y) Brayton z) Joule

Last Answer : ANSWER: X -- OTTO

The most efficient heat engine that can operate between two temperature reservoirs T1 and T2 is: w) jet engine x) internal combustion engine y) Carnot engine (pron: car-no) z) steam engine

Description : The most efficient heat engine that can operate between two temperature reservoirs T1 and T2 is: w) jet engine x) internal combustion engine y) Carnot engine (pron: car-no) z) steam engine

Last Answer : ANSWER: Y -- CARNOT ENGINE

How to get the original owner of an old 1908 license plate?

Description : How to get the original owner of an old 1908 license plate?

Last Answer : silky1 Yes you maybe able to contact the local historical society. I know there were not a lot of cars registered in 1908.

Would exercise in a gravity force accelerator be fun?

Description : Would exercise in a gravity force accelerator be fun?

Last Answer : Why not, sounds likes loads of fun, I bet imbibing in a little happy herb would make it really zen. lol Aaaah…float grasshopper, float.

Can we make non-superheavy elements in a particle accelerator?

Description : Can we make non-superheavy elements in a particle accelerator?

Last Answer : answer:Right? I don't know if it's quite practical with the design of the current equipment as it is made to take singular fundamental particles within atoms, smash them together, and see what the littler ... in the heart of a star or via supernova-soooo, you're pretty much made of star-metal.

What happens when you put a compound into a particle accelerator?

Description : What happens when you put a compound into a particle accelerator?

Last Answer : The molecules would need to be ionized in order to be accelerated. A proton, positron or electron hitting a molecule in even a small and weak particle accelerator would blow it into individual ionized atoms and/or smaller ionized molecules.

When the heat is very hot, my accelerator pedal and nothing stops responding and the speed and speed slowly slow down

Description : The engine does not shut down. I'll go through and fuck it again. Thank you

Last Answer : Need Answer

can you adjust the angle of an auto accelerator pedal?

Description : can you adjust the angle of an auto accelerator pedal?

Last Answer : Need Answer

What is the purpose of a particle accelerator?

Description : What is the purpose of a particle accelerator?

Last Answer : The main purpose of a particle accelerator is to generate synchrotron radiation or to smash atomic nuclei together or into a target to see what is produced from the energy of the ... inform which theoretical physical models are incorrect and occasionally which models have a valid experimental basis.

What is the purpose of accelerator governer?

Description : What is the purpose of accelerator governer?

Last Answer : The purpose of accelerator governer is to cut of steam momentarily when large electrical loads are taken to prevent turbine speeding up. 

Interaction of Multiplier and accelerator is known as (a) Investment Multiplier (b) Employment Multiplier (c) Super Multiplier (d) Dynamic Multiplier

Description : Interaction of Multiplier and accelerator is known as (a) Investment Multiplier (b) Employment Multiplier (c) Super Multiplier (d) Dynamic Multiplier

Last Answer : (c) Super Multiplier

Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Description : Pick up the correct statement from the following: (A) Calcium chloride acts as a retarder (B) Calcium chloride acts as an accelerator (C) Gypsum (calcium sulphate) acts as a retarder (D) Both (b) and (c)

Last Answer : (D) Both (b) and (c)

The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is (A) 1 (B) 2 (C) 3 (D) 4

Description : The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : Answer: Option B

If an increase in investment leads to a bigger increase in national income (a) Accelerator (b) Aggregate demand © Monetarism (d) Multiplier

Description : If an increase in investment leads to a bigger increase in national income (a) Accelerator (b) Aggregate demand © Monetarism (d) Multiplier

Last Answer : (d) Multiplier

Would it damage your car if you power washed the under side of the engine?

Description : Would it damage your car if you power washed the under side of the engine?

Last Answer : Sounds like you got something wet & it needed to dry out before starting. You probably didn't damage the car just gave it a temporary shock. I don't know that I'd try that on the newer computerized cars ... easily blow the Mother Board & cost $2,000-5,000 to repair. You might want to read more here.

Any idea what could make my engine light go and come back on?

Description : Any idea what could make my engine light go and come back on?

Last Answer : My Honda will do that if I don't tighten and then click the gas cap at least 3 times after fueling. I would take it to a Volkswagen dealership and let them diagnose it. If you need a ... expense of having your car towed. Maybe one of the more mechanical people on here will have more information.

Rodents in my engine compartment, what to do to discourage them?

Description : Rodents in my engine compartment, what to do to discourage them?

Last Answer : This is why I kill them as quickly as possible. I've had them chew wiring harnesses. They bricked one of my motorcycles. I would invest in 6 Victor rat traps at about $2.00 each. I'd also get ... it until you go a week without catching one. Don't delay! They are working on reproduction as we speak.