Write About Screw Conveyor And Bucket Conveyors?

Write About Screw Conveyor And Bucket Conveyors?
by

1 Answer

Answer :

In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While the screw is rotating, the coal is transferred` from one end to the other end.
Bucket conveyors are used as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.
by

Related questions

Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Last Answer : (C) Screw conveyor

Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Last Answer : (C) Bucket elevators

What Is The Use Of Belt Conveyors?

Description : What Is The Use Of Belt Conveyors?

Last Answer : Belt conveyors are mostly used for transporting coal over long distance with large quantity. An endless belt is made to run over a pair of end drums and pulleys and supported by series of roller at regular intervals.

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Last Answer : (B) Pneumatic conveyor

Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Last Answer : (C) Screw

For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Last Answer : (C) Screw conveyor

Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Description : Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes

Last Answer : Applications of MH Equipments:

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Last Answer : (B) Suitable for sticky materials

__________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)

Description : __________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Write About Isotopes Of An Element?

Description : Write About Isotopes Of An Element?

Last Answer : Some elements have the same number of protons in the nucleus but different number of neutrons. As a result, these elements have the same atomic number but different mass number. Such type of elements ... mass numbers due to different number of neutrons, are known as in the isotopes of an element.

Write About Atomic Number?

Description : Write About Atomic Number?

Last Answer : The nucleus contains protons and neutrons. The number of protons in a given atom is an atomic number (Z). The atomic number for H is 1 and He is 2.

Write About Boiler Mountings?

Description : Write About Boiler Mountings?

Last Answer : The devices used for the efficient operation, proper maintenance, and safe operation boiler mountings. The different boiler mountings are: 1. Water gauge (or) water level indicator 2. Pressure gauge (or) steam gauge 3. Safety valves 4. Fusible plug 5. Stop valve 6. Blow off cock 7. Feed check valve.

Write About Co2 Recorders?

Description : Write About Co2 Recorders?

Last Answer : In thermal power plants, it is necessary to keep the concentration Of CO2 is low is necessary as possible. To achieve this, a constant recording of concentration Of CO2 These recorders ... different principles, as given below.  Thermal conductivity cell  Chemical absorption cell  Density balance

Write About Forced Draught System?

Description : Write About Forced Draught System?

Last Answer : In this system, the blower (forced draft fan) is located at the base of the boiler near the grate. Air is forced to the furnace by forced fan and the flue gases are forced to chimney through economizer and air preheater.

Write About Artificial Draught?

Description : Write About Artificial Draught?

Last Answer : In modem power plants, the draught should be flexible to meet the fluctuating loads and it should be independent of atmospheric conditions. To achieve this, the aid of draft fans becomes must and by employing the draft fans, the height of the chimney would be reduced.

Write About Classification Of Draught?

Description : Write About Classification Of Draught?

Last Answer : Draught is classified as: 1. Natural draught 2. Artificial draught The artificial draught is further classified as:  Steam jet draught  Mechanical draught  Induced draught  Forced draught

Write About In Plant Handling Of Coal?

Description : Write About In Plant Handling Of Coal?

Last Answer : In order to handle large quantity of coal inside the plant, some mechanical handling systems are provided f6r smooth, easy and better controlled operation. The implant coal handling is divided, into following categories.  Coal unloading  Coal preparation  Coal transfer  Coal storage

Write About Out Plant Handling?

Description : Write About Out Plant Handling?

Last Answer : Out plant handling includes the handling of coal mine to the thermal power plant. These handlings are outside the plant in the following ways.  Transportation by sea (or) river  Transportation by rail  Transportation by road  Transportation of coal by pipeline.

Write About Fluidized Bed Boilers?

Description : Write About Fluidized Bed Boilers?

Last Answer : When the high velocity gas is passed through a packed bed of finely divided solid particles, the particles become suspended in the gas stream and the packed bed becomes a fluidized bed. When ... Bed Combustion. The boiler plant using this fluidized bed combustion is known as fluidized bed boilers.

Write About Waste Heat Boilers?

Description : Write About Waste Heat Boilers?

Last Answer : The waste heat boilers use the waste heat in gases coming out of diesel engines and gas turbines at high temperature (or) use the waste as a fuel in the incineration. Some boilers use the industrial dirty gases for power generation.

Write About Loeffler Boiler?

Description : Write About Loeffler Boiler?

Last Answer : The major disadvantage in La Mont boiler is the deposition of salt and sediment on the inner surface of the water tubes. It reduces the heat transfer and ultimately the steam generating capacity. ... by preventing water from flowing through the boiler tubes. The steam is generated outside the tubes.

Write About Benson Boiler? State Some Important Advantages Of Benson Boiler?

Description : Write About Benson Boiler? State Some Important Advantages Of Benson Boiler?

Last Answer : Benson boiler is the high pressure, vertical fire tube boiler. This boiler has no drum and is ~designed to operate at critical pressure of 225 bars. Benson boiler has no drum. So the total ... reduced by 20%, when compared to other boilers. The erection of Benson boiler is easier and quicker.

Write About La Mont Boiler? What Is The Major Disadvantage Of La Mont Boiler?

Description : Write About La Mont Boiler? What Is The Major Disadvantage Of La Mont Boiler?

Last Answer : La Mont boiler is a forced circulation high pressure water tube boiler. The major disadvantage is the formation of bubbles, salt and sediment on the inner surfaces of the heating surfaces. This reduces the heat flow and steam generation.

Write About Prime Movers?

Description : Write About Prime Movers?

Last Answer : Prime mover converts the kinetic energy of water into mechanical energy to produce electrical energy. Pelton wheel, turbine, Francis turbine, Kaplan turbine and Propeller turbine are prime movers used in hydraulic power plants.

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Last Answer : (B) Pneumatic

__________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Last Answer : (A) Flight

Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Last Answer : (C) Screw conveyor

Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor.(A) Drag(B) Ribbon(C) Screw(D) Slat

Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat

Last Answer : (B) Ribbon

Describe working of screw conveyor with neat sketch.

Description : Describe working of screw conveyor with neat sketch.

Last Answer : 1. A Screw conveyor consist of a continuous or broken blade helix or screw fastened to the shaft (or a pipe) 2. This helix or screw rotates in trough so that revolving screw advances the material. 3. ... divided solids or pasty solids. 4. This conveyor can also be used as mixture or blender. 

Name The Coolants Commonly Used For Fast Breeder Reactors?

Description : Name The Coolants Commonly Used For Fast Breeder Reactors?

Last Answer :  Liquid metal (Na (or) Na K)  Helium (He)  Carbon dioxide.

What Is Breeding In Nuclear Reactor?

Description : What Is Breeding In Nuclear Reactor?

Last Answer : The process of producing fissionable material from a fertile material such as uranium 238 (U 238) and thorium 232 (Th 232) by neutron absorption is known as breeding.

What Are The Advantages Of Gas Cooled Reactor Nuclear Power Plant?

Description : What Are The Advantages Of Gas Cooled Reactor Nuclear Power Plant?

Last Answer : 1. Fuel processing is simple. 2. The use of C02 as coolant completely eliminates the possibility of explosion in reactor. 3. No corrosion problem.

State Some Advantages Of Pressurized Water Reactor?

Description : State Some Advantages Of Pressurized Water Reactor?

Last Answer :  The pressurized water reactor is compact  In this type, water is used as coolant; moderator and reflector water is cheap and available in plenty)  It requires less number of control rods.

Name The Different Components Of Nuclear Reactor?

Description : Name The Different Components Of Nuclear Reactor?

Last Answer : 1. Nuclear fuel 2. Moderator 3. Control rods 4. Reflectors 5. Reactor vessel 6. Biological shielding 7. Coolant

What Is Meant By Nuclear Fission?

Description : What Is Meant By Nuclear Fission?

Last Answer : Uranium exists in different isotopes of U 238, tP34 and U 235. Out of these, EP35 is most unstable. When unstable heavy nucleus is bombarded with high-energy neutrons, it splits up roughly ... neutrons are released and a large amount of energy is produced. This process is called nuclear fission.

What Are The Different Types Of Load Acting On The Chimney?

Description : What Are The Different Types Of Load Acting On The Chimney?

Last Answer : Its own weight which is considered to act on single vertical force acting through the centroid The wind pressure, which is considered to act on the horizontal force acting on the centroid of vertical projected area.

What Is The Purpose Of Control Rods?

Description : What Is The Purpose Of Control Rods?

Last Answer : The control rods are used to start the chain reaction, maintain the chain reaction at required level and to shut down the reactor during emergency.

What Is The Working Principle Of Magneto Hydrodynamic Power Plant?

Description : What Is The Working Principle Of Magneto Hydrodynamic Power Plant?

Last Answer : The working principle of MHD is as like that of dynamo. Instead of solid conductor high temperature plasma is passed through the magnetic field at sonic speed. When the gas is passed through magnetic field, current is induced. Electrodes collect this induced current.

Name The Different Types Of Mhd Generators?

Description : Name The Different Types Of Mhd Generators?

Last Answer :  Open cycle MHD  Closed cycle MHD  Closed cycle MHD with liquid metal

What Are The Advantages Of Sodium In Fast-breeder Reactors?

Description : What Are The Advantages Of Sodium In Fast-breeder Reactors?

Last Answer :  Sodium has very low absorption cross-sectional area.  It possess good heat transfer properties at high temperature and low pressure.  It does not react with any of the structural materials used in primary circuits.

What Are The Demerits Of Breeder Reactor?

Description : What Are The Demerits Of Breeder Reactor?

Last Answer :  Highly enriched fuel is required  Control is difficult and expensive  Safety must be provided against melt down  Handling of sodium is a major problem

What Are The Advantages Of Breeder Reactors?

Description : What Are The Advantages Of Breeder Reactors?

Last Answer :  It gives high power density than any other reactor.  High breeding is possible.  High burn-up of fuel is achievable.  The operation of the reactor is not limited by Xe poisoning.

What Are The Advantages Using Co2 As Coolant?

Description : What Are The Advantages Using Co2 As Coolant?

Last Answer :  Gases do not react chemically with the structural materials.  Gas can attain any temperature for a particular pressure.  They do not absorb neutron.  The leakage of gas will not affect the reactivity.  The gas coolant provides best neutron economy.

Name Few Types Of Reactors?

Description : Name Few Types Of Reactors?

Last Answer : Fast reactors, Thermal reactors, natural fuel reactors, Enriched Uranium reactors, water moderated reactors, heavy water moderated reactor, graphite moderated reactor, gas cooled reactors and Sodium cooled reactors.