Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Dry powdery solid materials are transported by a __________
conveyor.
(A) Belt
(B) Bucket
(C) Screw
(D) None of these
by

1 Answer

Answer :

(C) Screw
by

Related questions

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Last Answer : (B) Pneumatic conveyor

For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Last Answer : (C) Screw conveyor

Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Last Answer : (C) Screw conveyor

__________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Last Answer : (A) Flight

Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Last Answer : (A) Apron

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Last Answer : (B) Pneumatic

Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Write About Screw Conveyor And Bucket Conveyors?

Description : Write About Screw Conveyor And Bucket Conveyors?

Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.

Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Last Answer : (C) Screw conveyor

Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor.(A) Drag(B) Ribbon(C) Screw(D) Slat

Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat

Last Answer : (B) Ribbon

Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Last Answer : (B) Drag or slat

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Last Answer : (C) Bucket elevators

The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Last Answer : (B) 30°

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Describe working of screw conveyor with neat sketch.

Description : Describe working of screw conveyor with neat sketch.

Last Answer : 1. A Screw conveyor consist of a continuous or broken blade helix or screw fastened to the shaft (or a pipe) 2. This helix or screw rotates in trough so that revolving screw advances the material. 3. ... divided solids or pasty solids. 4. This conveyor can also be used as mixture or blender. 

Where can I buy a belt conveyor system?

Description : Where can I buy a belt conveyor system?

Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.

What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Last Answer : (b) Roller bearing

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Last Answer : Forward: Reverse:

Powdery materials can be guarded against caking tendency on storage by (A) Providing irregular grain size (B) Providing minimum percentage of voids (C) Having maximum possible points of contact (D) None of these

Description : Powdery materials can be guarded against caking tendency on storage by (A) Providing irregular grain size (B) Providing minimum percentage of voids (C) Having maximum possible points of contact (D) None of these

Last Answer : (D) None of these

Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Last Answer : (B) Sticky (e.g. clay paste

__________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning

Last Answer : (C) Strain ageing

my honey crisp apple tree is red ,powdery n dry at the top, is it a disease n can it be saved.

Description : my honey crisp apple tree is red ,powdery n dry at the top, is it a disease n can it be saved.

Last Answer : Need Answer

Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes ‘powdery’ form of decay in wood. Which of these statements are correct? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Description : Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes powdery' form of decay in ... ? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Last Answer : (a) 1, 2 and 3

Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Description : Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Last Answer : (B) Tunnel

Dryer widely used in a textile industry is __________ dryer. (A) Festoon (B) Cylinder (C) Conveyor (D) Tunnel

Description : Dryer widely used in a textile industry is __________ dryer. (A) Festoon (B) Cylinder (C) Conveyor (D) Tunnel

Last Answer : (C) Conveyor

In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon

Description : In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon

Last Answer : (B) Heated cylinder

Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Last Answer : (B) Suitable for sticky materials

What are some factors to consider when trying choosing between a dry screw compressor and an oil-flooded screw compressor?

Description : What are some factors to consider when trying choosing between a dry screw compressor and an oil-flooded screw compressor?

Last Answer : Screw compressors utilize a pair of meshing helical screws to compress gases. These types of compressors a generally appropriate for a flow range of 85-170 m3/h (3000-6000 acfm) and discharge ... dry type these and other guidelines can help in choosing between the two types of screw compressors.

Which algorithm is used to shape the bursty traffic into a fixed rate traffic by averaging the data rate? a. solid bucket algorithm b. spanning tree algorithm c. hocken helm algorithm d. leaky bucket algorithm

Description : Which algorithm is used to shape the bursty traffic into a fixed rate traffic by averaging the data rate? a. solid bucket algorithm b. spanning tree algorithm c. hocken helm algorithm d. leaky bucket algorithm

Last Answer : d. leaky bucket algorithm

What In animals that lack a circulatory system how are materials transported?

Description : What In animals that lack a circulatory system how are materials transported?

Last Answer : Feel Free to Answer

In solid-state optical detectors, the excited charge is transported in the solid by ∙ a. Holes and protons ∙ b. Holes and electrons ∙ c. Anion and cation ∙ d. Protons and photons

Description : In solid-state optical detectors, the excited charge is transported in the solid by ∙ a. Holes and protons ∙ b. Holes and electrons ∙ c. Anion and cation ∙ d. Protons and photons

Last Answer : ∙ b. Holes and electrons

The behaviour of visco-elastic material is time dependent. This behaviour is common in __________ materials. (A) Non-crystalline solid (B) Crystalline (C) Rubbery (D) Non-crystalline organic polymeric

Description : The behaviour of visco-elastic material is time dependent. This behaviour is common in __________ materials. (A) Non-crystalline solid (B) Crystalline (C) Rubbery (D) Non-crystalline organic polymeric

Last Answer : (D) Non-crystalline organic polymeric

If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry in an oven C. soak it in a bucket of commercial solvent and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Description : If a small electric motor has been submerged in saltwater for a short period of time, you should _____________. A. send it ashore for rewinding B. rinse it with warm freshwater and bake it dry ... and bake with internal heat D. clean it with carbon tetrachloride and blow it out with compressed air

Last Answer : Answer: B

Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Description : Dryness fraction of wet steam is defined as the ratio of mass of vapour in the mixture to the mass of mixture __________ calorimeter is not used for measuring the dryness fraction of steam. (A) Bomb (B) Separating (C) Bucket (D) Throttling

Last Answer : A) Bomb

__________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Description : __________ calorimeter is normally used for measuring the dryness fraction of steam, when it is very low. (A) Bucket (B) Throttling (C) Separating (D) A combination of separating & throttling

Last Answer : (D) A combination of separating & throttling

Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Description : Vessels made of __________ can be used to store dry chlorine. (A) Thermoplastic materials (B) Nickel (C) Steel or iron (D) None of these

Last Answer : (C) Steel or iron

Rotary dryers cannot handle __________ materials. (A) Free flowing (B) Dry (C) Sticky (D) Granular

Description : Rotary dryers cannot handle __________ materials. (A) Free flowing (B) Dry (C) Sticky (D) Granular

Last Answer : (C) Sticky

To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Description : To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Last Answer : (A) Perfectly dry

Sublimation temperature of dry ice (solid CO2) is __________ °C. (A) -273 (B) 0 (C) -78 (D) 5

Description : Sublimation temperature of dry ice (solid CO2) is __________ °C. (A) -273 (B) 0 (C) -78 (D) 5

Last Answer : (C) -78

__________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)

Description : __________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)