The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

The most suitable equipment for the transportation of 200 mesh size
particles is a
(A) Bucket elevator
(B) Pneumatic conveyor
(C) Screw conveyor
(D) Belt conveyor
by

1 Answer

Answer :

(B) Pneumatic conveyor
by

Related questions

For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Last Answer : (B) Pneumatic

Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Last Answer : (C) Screw conveyor

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Last Answer : (C) Screw conveyor

Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Last Answer : (C) Screw conveyor

__________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

Last Answer : (A) Flight

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Last Answer : (C) Screw

Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing

Last Answer : (B) Sticky (e.g. clay paste

Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Write About Screw Conveyor And Bucket Conveyors?

Description : Write About Screw Conveyor And Bucket Conveyors?

Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.

Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

80% less than 200 mesh size particles are called (A) Smoke (B) Powder (C) Grit (D) Aggregates

Description : 80% less than 200 mesh size particles are called (A) Smoke (B) Powder (C) Grit (D) Aggregates

Last Answer : (B) Powder

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Last Answer : (C) Bucket elevators

Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor.(A) Drag(B) Ribbon(C) Screw(D) Slat

Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat

Last Answer : (B) Ribbon

is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.

Last Answer : MOVER

The most suitable equipment for compacting clayey soils is a (A) Smooth wheeled roller (B) Pneumatic tyred roller (C) Sheep foot roller (D) Vibrator

Description : The most suitable equipment for compacting clayey soils is a (A) Smooth wheeled roller (B) Pneumatic tyred roller (C) Sheep foot roller (D) Vibrator

Last Answer : Answer: Option C

Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Last Answer : (A) Apron

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Last Answer : (B) Drag or slat

The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Last Answer : (B) 30°

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Describe working of screw conveyor with neat sketch.

Description : Describe working of screw conveyor with neat sketch.

Last Answer : 1. A Screw conveyor consist of a continuous or broken blade helix or screw fastened to the shaft (or a pipe) 2. This helix or screw rotates in trough so that revolving screw advances the material. 3. ... divided solids or pasty solids. 4. This conveyor can also be used as mixture or blender. 

Where can I buy a belt conveyor system?

Description : Where can I buy a belt conveyor system?

Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.

What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Last Answer : (b) Roller bearing

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Last Answer : Forward: Reverse:

Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the screening of the (A) Light metal powder down upto 4 mesh size (B) Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Description : Reciprocating screens are normally inclined at an angle of 5° with the horizontal and employ gyratory motion at feed end & reciprocating motion at the discharge end. They are not suitable for the ... Dry chemicals (C) Heavy tonnages of rocks or gravel (D) Powdered food & granular materials

Last Answer : (C) Heavy tonnages of rocks or gravel

Which of the following gives the work required for size reduction of coal to -200 mesh in a ball mill most accurately? (A) Rittinger's law (B) Kick's law (C) Bond's law (D) None of these

Description : Which of the following gives the work required for size reduction of coal to -200 mesh in a ball mill most accurately? (A) Rittinger's law (B) Kick's law (C) Bond's law (D) None of these

Last Answer : (A) Rittinger's law

200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Description : 200 mesh sieve size corresponds to __________ microns. (A) 24 (B) 74 (C) 154 (D) 200

Last Answer : (B) 74

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher(B) Ball mill(C) Roll crusher(D) Gyratory crusher

Description : Coal is finally pulverised to 200 mesh size for burning in boilers by a (A) Hammer crusher (B) Ball mill (C) Roll crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush one tonne of feed to 200 microns (C) Energy (kWh/ton of feed) needed to crush small feed to such a size that 80% of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Description : Work index is defined as the (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen (B) Energy needed to crush ... of the product passes a 200 mesh screen (D) Energy needed to crush one ton of feed to 100 microns

Last Answer : (A) Gross energy (kWh/ton of feed) needed to reduce very large feed to such a size that 80% of the product passes through a 100 micron screen

Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for(A) British standard screens(B) German standard screens (DIN 1171) etc(C) American standard screens (ASTM and Tyler standard screens)(D) All (A), (B) and (C)

Description : Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for (A) British ... (C) American standard screens (ASTM and Tyler standard screens) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Last Answer : a.Industrial Robot

From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Description : From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above

Last Answer : c.Both A & B

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Description : 200 mesh screen means 200 openings per (A) cm2 (B) cm (C) inch (D) inch

Last Answer : (C) inch

Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Description : Pick out the wrong statement. (A) Hammer crushers operate by impact action (B) Standard screens have circular opening (C) With increase in mesh number of screens, their diameter in microns decreases (D) 200 mesh screen has 200 openings per linear cm

Last Answer : (D) 200 mesh screen has 200 openings per linear cm

The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Description : The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Last Answer : (A) 0.0074 cm

Pneumatic seed drills are suitable for sowing: A. Small seeds B. Bolder seeds C. Both (a) & (b) D. None of these

Description : Pneumatic seed drills are suitable for sowing: A. Small seeds B. Bolder seeds C. Both (a) & (b) D. None of these

Last Answer : Both (a) & (b)

Which one of the following rollers is suitable for soil-cement stabilized road construction? (a) Vibratory roller (b) Sheepfoot roller (c) Pneumatic roller (d) Smooth wheel roller

Description : Which one of the following rollers is suitable for soil-cement stabilized road construction? (a) Vibratory roller (b) Sheepfoot roller (c) Pneumatic roller (d) Smooth wheel roller

Last Answer : (c) Pneumatic roller

Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Last Answer : (B) Suitable for sticky materials

5-200 μm size particles are called (A) Colloids or aerosols (B) Powder (C) Dust (D) Smoke

Description : 5-200 μm size particles are called (A) Colloids or aerosols (B) Powder (C) Dust (D) Smoke

Last Answer : (A) Colloids or aerosols

Explain the requirements of elevator motor. State with reason best suitable motor for elevator.

Description : Explain the requirements of elevator motor. State with reason best suitable motor for elevator.

Last Answer : Ideal requirements of elevator motor: 1. High starting torque along with high rate of acceleration and retardation. 2. Motors are compact in size especially smaller in diameter. 3. Speed of motor should not exceed 900 ... 4. Permanent magnet AC Motor. 5. Split Phase AC I.M. 6. Capacitor Start I.M.