__________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt

__________ conveyor is the most suitable for short distance
transportation of non-abrasive loose materials like garbage, grain, food
wastes etc.
(A) Flight
(B) Screw
(C) Drag
(D) Belt
by

1 Answer

Answer :

(A) Flight
by

Related questions

Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw

Last Answer : (D) Screw

__________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron

Last Answer : (B) Belt

Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor

Last Answer : (C) Flight conveyor

Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon

Last Answer : (B) Drag or slat

Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor.(A) Drag(B) Ribbon(C) Screw(D) Slat

Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat

Last Answer : (B) Ribbon

The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor

Last Answer : (B) Pneumatic conveyor

Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo

Last Answer : (C) Screw conveyor

Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt

Last Answer : (A) Apron

For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these

Last Answer : (B) Pneumatic

Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these

Last Answer : (C) Screw

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)

Last Answer : (B) Suitable for sticky materials

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator

Last Answer : (C) Screw conveyor

Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor

Last Answer : (C) Screw conveyor

Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor

Last Answer : (C) Bucket elevators

Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Description : Wet sieving is employed, when the product contains __________ materials. (A) Abrasive (B) Large quantity of very fine (C) Coarse (D) Non-sticky

Last Answer : (B) Large quantity of very fine

hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Last Answer : Option C

Cermets are __________ materials. (A) Refractory (B) Reinforced (C) Abrasive (D) Fully metallic

Description : Cermets are __________ materials. (A) Refractory (B) Reinforced (C) Abrasive (D) Fully metallic

Last Answer : (A) Refractory

The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Last Answer : (B) 30°

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Soft & non-abrasive materials can be made into fines by (A) Attrition (B) Compression (C) Cutting (D) None of these

Description : Soft & non-abrasive materials can be made into fines by (A) Attrition (B) Compression (C) Cutting (D) None of these

Last Answer : (A) Attrition

Write About Screw Conveyor And Bucket Conveyors?

Description : Write About Screw Conveyor And Bucket Conveyors?

Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.

Describe working of screw conveyor with neat sketch.

Description : Describe working of screw conveyor with neat sketch.

Last Answer : 1. A Screw conveyor consist of a continuous or broken blade helix or screw fastened to the shaft (or a pipe) 2. This helix or screw rotates in trough so that revolving screw advances the material. 3. ... divided solids or pasty solids. 4. This conveyor can also be used as mixture or blender. 

__________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)

Description : __________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Where can I buy a belt conveyor system?

Description : Where can I buy a belt conveyor system?

Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.

What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Last Answer : (b) Roller bearing

Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.

Last Answer : Forward: Reverse:

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Description : For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Last Answer : (B) Coarser

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Last Answer : Answer: Option C

What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement for a higher angle of attack c. An increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Description : What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement ... increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Last Answer : b. An increase induced drag and a requirement for a higher angle of attack

Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal c. Thrust is greater than drag and lift is greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal

Description : Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal ... greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal

Last Answer : b. These forces are equal

What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Description : What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

What Type Of Transportation Was Only Used for short distance?

Description : What Type Of Transportation Was Only Used for short distance?

Last Answer : horsecars

What Type Of Transportation Was Only Used for short distance?

Description : What Type Of Transportation Was Only Used for short distance?

Last Answer : horsecars

Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Description : Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Last Answer : (B) Tunnel

Dryer widely used in a textile industry is __________ dryer. (A) Festoon (B) Cylinder (C) Conveyor (D) Tunnel

Description : Dryer widely used in a textile industry is __________ dryer. (A) Festoon (B) Cylinder (C) Conveyor (D) Tunnel

Last Answer : (C) Conveyor

In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon

Description : In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon

Last Answer : (B) Heated cylinder

__________ adds time and place utility to a product by moving it from where it is made to where it is purchased and used. A)Warehousing B)Containerisation C)Distribution D)Materials handling E)Transportation

Description : __________ adds time and place utility to a product by moving it from where it is made to where it is purchased and used. A)Warehousing B)Containerisation C)Distribution D)Materials handling E)Transportation

Last Answer : E)Transportation

Order processing, inventory management, materials handling, warehousing, and transportation are __________ activities. A)wholesaling B)retailing C)physical distribution D)channel management

Description : Order processing, inventory management, materials handling, warehousing, and transportation are __________ activities. A)wholesaling B)retailing C)physical distribution D)channel management

Last Answer : C)physical distribution

What Erosion is the removal and transportation of weathered and non weathered materials by?

Description : What Erosion is the removal and transportation of weathered and non weathered materials by?

Last Answer : What is the answer ?