Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron
Last Answer : (B) Belt
Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor
Last Answer : (B) Pneumatic conveyor
Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these
Last Answer : (B) Pneumatic
Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator
Last Answer : (C) Screw conveyor
Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt
Last Answer : (A) Flight
Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor
Last Answer : (C) Flight conveyor
Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt
Last Answer : (A) Apron
Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat
Last Answer : (B) Ribbon
Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these
Last Answer : (C) Screw
Description : Which of the following mechanical conveyors does not come under the division ‘carriers’? (A) Belt conveyor (B) Bucket elevator (C) Screw conveyor
Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck
Last Answer : (B) Belt conveyor
Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw
Last Answer : (D) Screw
Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Trough of an apron conveyor is made of (A) Lead lined concrete vessel (B) Wood (C) Metal (D) Either (B) or (C)
Last Answer : (D) Either (B) or (C)
Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)
Last Answer : (B) Suitable for sticky materials
Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B
Last Answer : (C) Both (A) & (B)
Description : __________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)
Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these
Last Answer : (B) Skip hoist
Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these
Last Answer : (A) Speed
Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon
Last Answer : (B) Drag or slat
Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60
Last Answer : (B) 30°
Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Write About Screw Conveyor And Bucket Conveyors?
Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.
Description : Describe working of screw conveyor with neat sketch.
Last Answer : 1. A Screw conveyor consist of a continuous or broken blade helix or screw fastened to the shaft (or a pipe) 2. This helix or screw rotates in trough so that revolving screw advances the material. 3. ... divided solids or pasty solids. 4. This conveyor can also be used as mixture or blender.
Description : Where can I buy a belt conveyor system?
Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.
Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned
Last Answer : (b) Roller bearing
Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc
Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.
Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.
Last Answer : Forward: Reverse:
Description : Pick out the wrong statement pertaining to the rotary dryer. (A) Flights (located in the inside shell of rotary dryer) lift the material being dried and shower it down through the current of ... D) Recommended peripheral speed of a rotary drier is in the range of 10 to 30 metres/minute
Last Answer : (C) Rotary dryer is suitable for drying sticky materia
Description : seed drill can be tested by a) sand bed method b) sticky belt methods c) both d) none of these Ans. c
Last Answer : ans c
Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ
Last Answer : (A) 3.6 W.D.V.ρ
Description : Bucket elevators are not suitable for the vertical lifting of __________ materials. (A) Fine (e.g. - 200 mesh size coal) (B) Sticky (e.g. clay paste) (C) Small lumpy (e.g. grains and sand) (D) Free flowing
Last Answer : (B) Sticky (e.g. clay paste
Description : The most suitable equipment for compacting clayey soils is a (A) Smooth wheeled roller (B) Pneumatic tyred roller (C) Sheep foot roller (D) Vibrator
Last Answer : Answer: Option C
Description : Pneumatic seed drills are suitable for sowing: A. Small seeds B. Bolder seeds C. Both (a) & (b) D. None of these
Last Answer : Both (a) & (b)
Description : Which one of the following rollers is suitable for soil-cement stabilized road construction? (a) Vibratory roller (b) Sheepfoot roller (c) Pneumatic roller (d) Smooth wheel roller
Last Answer : (c) Pneumatic roller
Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above
Last Answer : a.Industrial Robot
Description : From the following which material handling equipment is used in ladder layout of FMS a.Conveyor systems b.AGVS c.Both A & B d.None of the above
Last Answer : c.Both A & B
Description : Sticky material can be dried in a __________ dryer. (A) Tray (B) Rotary (C) Fluidised bed (D) None of these
Last Answer : (A) Tray
Description : From the point of lower specific energy consumption, which of the following compressors are suitable for part load operation? a) Two stage reciprocating compressors b) Centrifugal compressors c) Two stage screw compressor d) Single stage screw compressor
Last Answer : a) Two stage reciprocating compressors
Description : Apron conveyors are used for (A) Heavy loads & short runs (B) Small loads & long runs (C) Heavy loads & long runs (D) None of these
Last Answer : (A) Heavy loads & short runs
Description : __________ of a material results, when its strength is increased & ductility is decreased by heating at a relatively lower temperature after cold working. (A) Solid solution hardening (B) Screw dislocation (C) Strain ageing (D) Twinning
Last Answer : (C) Strain ageing
Description : V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above
Last Answer : c. both (a) and (b)
Description : How do you get rid of a stomach apron?
Last Answer : answer:surgery. A lot of it is laser these days and much less invasive. But you will have to remove some of the skin flap, a seam along the joining of groin and thigh would not look bad. Age ... contracting on its own if the underlying fat is gone. The older you are the less elasticity skin has.
Description : I have heard of a something-or-other, growing in its nook, swelling and rising, pushing up its covering. Upon that boneless thing a cocky-minded young woman took a grip with her hands; with her apron a lord’s daughter covered the tumescent thing. What is it? -Riddles
Last Answer : Dough turning into bread.
Description : Why can't a cook swallow his apron? -Riddles
Last Answer : Because it goes against his stomach.
Description : What services are offered by blue apron in 2021?
Last Answer : Blue Apron is a better way to cook. Blue Apron sends all the ingredients for inventive yet simple weeknight meals to customers weekly. Guaranteed Fresh, people are getting back into the kitchen and enjoying cooking again!cutt.ly/FjgJGuY
Description : I want to see people looking for the blue apron?
Last Answer : Blue Apron is a better way to cook. Blue Apron sends all the ingredients for inventive yet simple weeknight meals to customers weekly. Guaranteed Fresh, people are getting back into the kitchen and enjoying cooking again!cutt.ly/ujpRZYA
Description : what is the best apron prouducts?
Last Answer : Blue Apron is a better way to cook. Blue Apron sends all the ingredients for inventive yet simple weeknight meals to customers weekly. Guaranteed Fresh, people are getting back into the kitchen and enjoying cooking again!cutt.ly/oh2gXVt