Description : Mechanical conveyors which push the material along an endless trough or tube are called scrappers. Which of the following conveying equipments comes under the category of ‘scrappers’? (A) Bucket conveyor (B) Flight conveyor (C) Screw conveyor (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Which of the following mechanical conveyors does not come under the division ‘scrapers’? (A) Ribbon conveyor (B) Flight conveyor (C) Bucket elevators (D) Drag conveyor
Last Answer : (C) Bucket elevators
Description : The most suitable equipment for the transportation of 200 mesh size particles is a (A) Bucket elevator (B) Pneumatic conveyor (C) Screw conveyor (D) Belt conveyor
Last Answer : (B) Pneumatic conveyor
Description : For transporting pasty material, one will use a/an (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Bucket elevator
Last Answer : (C) Screw conveyor
Description : Write About Screw Conveyor And Bucket Conveyors?
Last Answer : In screw conveyor, an endless helicoids screw is fitted to the shaft. On one end of the shaft, the driving mechanism is fitted and the other end of the shaft is supported on a ball bearing. While ... as vertical lifts. The coal is loaded at the bottom and unloaded at the top in the bucket conveyors.
Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these
Last Answer : (B) Skip hoist
Description : __________ conveyor is the most suitable for long distance transportation of cold, non-abrasive granular/irregular shape/fine materials. (A) Bucket (B) Belt (C) Screw (D) Apron
Last Answer : (B) Belt
Description : Dry powdery solid materials are transported by a __________ conveyor. (A) Belt (B) Bucket (C) Screw (D) None of these
Last Answer : (C) Screw
Description : Which of the following conveyors cannot be recommended for transportation of abrasive materials? (A) Belt conveyor (B) Apron conveyor (C) Flight conveyor (D) Chain conveyor
Last Answer : (C) Flight conveyor
Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : For the transportation of ultrafine particles, the equipment used is a __________ conveyor. (A) Belt (B) Pneumatic (C) Screw (D) None of these
Last Answer : (B) Pneumatic
Description : __________ conveyor is the most suitable for short distance transportation of non-abrasive loose materials like garbage, grain, food wastes etc. (A) Flight (B) Screw (C) Drag (D) Belt
Last Answer : (A) Flight
Description : Which is the most suitable conveyor for transportation of sticky material? (A) Apron conveyor (B) Belt conveyor (C) Screw conveyor (D) Pneumatic conveyo
Description : Screw conveyors are (A) Run at very high rpm (B) Suitable for sticky materials (C) Suitable for highly abrasive materials (D) All (A), (B) and (C)
Last Answer : (B) Suitable for sticky materials
Description : __________ conveyors are also called scrapers. (A) Apron (B) Screw (C) Helical flight (D) Both (B) & (C)
Description : Write any one application for each of following material handling equipments: (i) Bucket Conveyors (ii) Fork Lift Trucks (iii) Jib Crane (iv) Gravity Chutes
Last Answer : Applications of MH Equipments:
Description : Which website is best to buy belt conveyors?
Last Answer : The best website to buy belt conveyors from is www.gilmorekramer.com. They have a wide selection of belt conveyors to best suit the needs of your new company.
Description : What is the use of belt conveyors?
Last Answer : Belt conveyors are mostly used for transporting coal over long distance with large quantity. An endless belt is made to run over a pair of end drums and pulleys and supported by series of roller at regular intervals.
Description : What Is The Use Of Belt Conveyors?
Description : Short distance transportation of grain, gravel, sand, ash, asphalt etc. is done by using a __________ conveyor. (A) Flight (B) Slat or drag (C) Ribbon (D) Screw
Last Answer : (D) Screw
Description : Gummy & sticky materials like molasses, sugar etc. are besttransported/handled by using a __________ conveyor. (A) Drag (B) Ribbon (C) Screw (D) Slat
Last Answer : (B) Ribbon
Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.
Last Answer : MOVER
Description : Hot, lumpy & abrasive materials are best transported by using a/an __________ conveyor. (A) Apron (B) Belt
Last Answer : (A) Apron
Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these
Last Answer : (A) Speed
Description : Handling of ashes and similar materials can be done best by a __________ conveyor. (A) Flight (B) Drag or slat (C) Belt (D) Ribbon
Last Answer : (B) Drag or slat
Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60
Last Answer : (B) 30°
Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B
Last Answer : (C) Both (A) & (B)
Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck
Last Answer : (B) Belt conveyor
Description : Describe working of screw conveyor with neat sketch.
Last Answer : 1. A Screw conveyor consist of a continuous or broken blade helix or screw fastened to the shaft (or a pipe) 2. This helix or screw rotates in trough so that revolving screw advances the material. 3. ... divided solids or pasty solids. 4. This conveyor can also be used as mixture or blender.
Description : Where can I buy a belt conveyor system?
Last Answer : There are several different sites online where you can purchase a conveyor belt system. One such site is conveyorbelts.com. A wide selection is offered.
Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned
Last Answer : (b) Roller bearing
Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc
Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.
Description : Develop a ladder diagram for to control conveyor belt motor equipped with the: (i) Counter of item. (ii) Start & Stop functions. (iii) Change of direction function.
Last Answer : Forward: Reverse:
Description : Apron conveyors are used for (A) Heavy loads & short runs (B) Small loads & long runs (C) Heavy loads & long runs (D) None of these
Last Answer : (A) Heavy loads & short runs
Description : Why do iron ore mines first stack the ore with stackers and then reclaim it via reclaimers to transfer it to export conveyors?
Last Answer : Stacking and reclaiming allow mines to create stockpiles of ore between stages of the operation. These stockpiles act as buffers that insulate the various stages from uneven flows upstream and downstream. ... the flow by creating reserves along the way that can be expanded or depleted as necessary.
Description : In thermal power plants, coal is transferred from bunker to the other places by [IES-1992] (a) Hoists (b) conveyors (c) cranes (d) lifts
Last Answer : (b) conveyors
Description : Post harvest technology has to develop in consonance with the needs of each society to A) Self-propelled type B) Improve nutrition C) PTO driven type D) Conveyors
Last Answer : Improve nutrition
Last Answer : If a D.C. motor is to be selected for conveyors, Series motor would be preferred.
Description : Can the bottom (floorboard) of an elevator come loose and fall?
Last Answer : I always get the feeling that elevators are pretty safe, as far as means of transportation go. There are always posted an inspection of the elevator, and also a clear limit of number of people. (Of ... up the doors when no elevator is there, or opening when it is off from the floor somewhat.
Description : Where does elevator music come from?
Last Answer : answer:the 80’s… Just kidding… I think there is a business called the Clear Channel…. is that right? http://www.clearchannel.com/
Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ
Last Answer : (A) 3.6 W.D.V.ρ
Description : Trough of an apron conveyor is made of (A) Lead lined concrete vessel (B) Wood (C) Metal (D) Either (B) or (C)
Last Answer : (D) Either (B) or (C)
Description : Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon
Last Answer : (B) Tunnel
Description : Dryer widely used in a textile industry is __________ dryer. (A) Festoon (B) Cylinder (C) Conveyor (D) Tunnel
Last Answer : (C) Conveyor
Description : In paper industry, paper is dried in a __________ dryer. (A) Tunnel (B) Heated cylinder (C) Conveyor (D) Festoon
Last Answer : (B) Heated cylinder
Description : Which German mathematician developed a more advanced mechanical calculator capable of multiplication and division using wheels and rods based on Pascal's instrument ?
Last Answer : German mathematician Gottfried von Leibniz developed a more sophisticated mechanical calculator capable of multiplication and division using wheels and rods based on Pascal's instrument.
Description : I come in a cone but I am not food;I will be skewed if you screw with my hue;I come by the millions but you can probably only name a few.What am I? -Riddles
Last Answer : Colors.
Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above
Last Answer : a.Industrial Robot