To ensure constant moisture content in aggregates (A) Area of each aggregate pile should be large (B) Height of each aggregate pile should not exceed 1.50 m (C) Aggregate pile should be left for 24 hours before aggregates are used (D) All the above

To ensure constant moisture content in aggregates
(A) Area of each aggregate pile should be large
(B) Height of each aggregate pile should not exceed 1.50 m
(C) Aggregate pile should be left for 24 hours before aggregates are used
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse aggregate should not exceed one fifty of the minimum dimension of the reinforced concrete member (c)The aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Description : Which of the following statement is correct (a) The maximum size of coarse aggregate should not exceed one fourth of the minimum dimension of the plain concrete member. (b) The maximum size of coarse ... aggregates of 40mm, 20mm and 10mm sizes are commonly used for concrete works (d) All the above

Last Answer : (d) All the above

Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Last Answer : Answer: Option D

The aggregate containing moisture in pores and having its surface dry, is known as (A) Moist aggregates (B) Very dry aggregates (C) Dry aggregates (D) Saturated surface dry aggregate

Description : The aggregate containing moisture in pores and having its surface dry, is known as (A) Moist aggregates (B) Very dry aggregates (C) Dry aggregates (D) Saturated surface dry aggregate

Last Answer : Answer: Option D

The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Description : The percentage of the aggregate of F.M. 2.6 to be combined with coarse aggregate of F.M. 6.8 for obtaining the aggregates of F.M. 5.4, is (A) 30 % (B) 40 % (C) 50 % (D) 60 %

Last Answer : (C) 50 %

Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Last Answer : Answer: Option A

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Description : The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Last Answer : (D) 250 P.P.M.

Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices due to molecular attraction, is called pellicular water (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Description : Pick up the correct statement from the following: (A) The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity (B) Water retained by the interstices ... (C) Sum of the percentage of specific yield and specific retention is 100 (D) All the above

Last Answer : Answer: Option D

For ensuring quality of concrete, use (A) Single sized aggregates (B) Two sized aggregate (C) Graded aggregates (D) Coarse aggregates

Description : For ensuring quality of concrete, use (A) Single sized aggregates (B) Two sized aggregate (C) Graded aggregates (D) Coarse aggregates

Last Answer : (C) Graded aggregates

For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Description : For preparing a test-specimen, it is necessary (A) To mix cement and fine aggregate by dry hand (B) To mix coarse aggregates (C) To mix water to the cement, fine aggregates and coarse aggregates (D) All the above

Last Answer : Answer: Option D

The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Description : The type of aggregates not suitable for high strength concrete and for pavements subjected to tension, is (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregat

Last Answer : Answer: Option A

How the moisture content of the aggregates obtainable at site affect the water content ratio specified?

Description : How the moisture content of the aggregates obtainable at site affect the water content ratio specified?

Last Answer : Obviously, if the aggregates are in a surface wet condition, meaning the moisture content is greater than the absorption, that surface water increases the water-to-cement ratio and affects strength and durability.

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net ... load should not exceed (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Description : The size of fine aggregates does not exceed (A) 2.75 mm (B) 3.00 mm (C) 3.75 mm (D) 4.75 mm

Last Answer : Answer: Option D

The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Description : The size of fine aggregates does not exceed [ A ] 2.75 mm [ B ] 3.75 mm [ C ] 4.75 mm [ D ] 5.75 mm

Last Answer : [ C ] 4.75 mm

To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Description : To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is (A) 0.107 L (B) 0.207 L (C) 0.307 L (D) 0.407 L

Last Answer : Answer: Option B

A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Last Answer : Answer: Option C

If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : If the engineer-in-charge approves, the 10 cm cubes may be used for the work test of concrete provided maximum nominal size of aggregate, does not exceed (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option C

The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Description : The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Last Answer : (d) All of these.

For Unbraced column, the ratio of the clear height of the column to the minimum dimension of the column shall not exceed [ A ] 30 [ B ] 40 [ C ] 50 [ D ] 60

Description : For Unbraced column, the ratio of the clear height of the column to the minimum dimension of the column shall not exceed [ A ] 30 [ B ] 40 [ C ] 50 [ D ] 60

Last Answer : [ A ] 30

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

An aggregate which may contain some moisture in the pores but having dry surface is known as. (a) Dry aggregate (b) Moist aggregate (c) Saturated surface dry aggregate (d) All the above

Description : An aggregate which may contain some moisture in the pores but having dry surface is known as. (a) Dry aggregate (b) Moist aggregate (c) Saturated surface dry aggregate (d) All the above

Last Answer : (a) Dry aggregate

Batching refers to (A) Controlling the total quantity at each batch (B) Weighing accurately, the quantity of each material for a job before mixing (C) Controlling the quantity of each material into each batch (D) Adjusting the water to be added in each batch according to the moisture content of the materials being mixed in the batch

Description : Batching refers to (A) Controlling the total quantity at each batch (B) Weighing accurately, the quantity of each material for a job before mixing (C) Controlling the quantity of each material ... be added in each batch according to the moisture content of the materials being mixed in the batch

Last Answer : (C) Controlling the quantity of each material into each batch

There are 50 compartments in a Chennai express carrying an average of 70 passengers per compartments. At least 24 passengers were sitting in each compartment, not any compartment has equal number of passengers, and any compartment does not exceed the number of average passengers expect 50th compartment. Find how many passengers can be accommodated in 50th compartment? A. 748 B. 705 C.739 D.cannot be determined

Description :  There are 50 compartments in a Chennai express carrying an average of 70 passengers per compartments. At least 24 passengers were sitting in each compartment, not any compartment has equal number of passengers, ... can be accommodated in 50th compartment? A. 748 B. 705 C.739 D.cannot be determined 

Last Answer : C) Total number of passengers in Chennai express = 50*70 = 3500 Total number of candidates from 1 to 49 compartments = 24+25+....+70 = (70*71)/2 +(23*24)/2 = 2761 number of passengers in 50th compartment = 3500 - 2761= 739

In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Description : In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Last Answer : Answer: Option C

The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Description : The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Last Answer : b) 24 hours*

The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Description : The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Last Answer : Answer: Option C

It will be ensured that the aggregate value of all the VP articles including article including customs duty articles entrusted to an EDDA does not exceed Rs ______ a) 8000/- b) 5000/- c) 10000/- d) 20000/

Description : It will be ensured that the aggregate value of all the VP articles including article including customs duty articles entrusted to an EDDA does not exceed Rs ______ a) 8000/- b) 5000/- c) 10000/- d) 20000/

Last Answer : a) 8000/

The factor which affects workability, is (A) Water content and its temperature (B) Shape and size of the aggregates (C) Air entraining agents (D) All the above

Description : The factor which affects workability, is (A) Water content and its temperature (B) Shape and size of the aggregates (C) Air entraining agents (D) All the above

Last Answer : (D) All the above

For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above

Description : For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the concrete (C) The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Workability of concrete for a given water content is good, if the aggregates are [ A ] Rounded [ B ] Irregular [ C ] Angular [ D ] Flaky

Description : Workability of concrete for a given water content is good, if the aggregates are [ A ] Rounded [ B ] Irregular [ C ] Angular [ D ] Flaky

Last Answer : [ A ] Rounded

Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Description : Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Last Answer : (D) 105° to 110°C

The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content

Description : The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content

Last Answer : [ A ] Water cement ratio

An engineer is asked to design a playground slide such that the speed a child reaches at the bottom does not exceed 4.0 m/s. Determine the maximum height that the slide can be.?Given, g = 9.8 m/s2. -Physics 9th

Description : An engineer is asked to design a playground slide such that the speed a child reaches at the bottom does not exceed 4.0 m/s. Determine the maximum height that the slide can be.?Given, g = 9.8 m/s2. -Physics 9th

Last Answer : Entire PE is converted to KE when the child reaches bottom So KE = PE 12mv2=mgH12mv2=mgH or H=v22g=162×9.8=.816mH=v22g=162×9.8=.816m

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min

The dummy source/destination in a transportation problem is added to ........................ a. Satisfy rim constraints b. Prevent solution from becoming degenerate c. Ensure total cost does not exceed a limit d. None of the above

Description : The dummy source/destination in a transportation problem is added to ........................ a. Satisfy rim constraints b. Prevent solution from becoming degenerate c. Ensure total cost does not exceed a limit d. None of the above

Last Answer : a. Satisfy rim constraints

If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Description : If 50 kg of fine aggregates and 100 kg of coarse aggregates are mixed in a concrete whose water cement ratio is 0.6, the weight of water required for harsh mix, is (A) 8 kg (B) 10 kg (C) 12 kg (D) 14 kg

Last Answer : Answer: Option C

For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of aggregates (C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Description : For the construction of cement concrete dams, the maximum permissible size of the aggregates, is (A) 40 mm (B) 50 mm (C) 60 mm (D) 70 mm

Last Answer : Answer: Option A

The proportion of coarse aggregates to fire aggregates in structural concrete is usually [ A ] 0.50 - 1.25 [ B ] 1.25 - 4.50 [ C ] 1.50 - 2.50 [ D ] 0.25 - 0.75

Description : The proportion of coarse aggregates to fire aggregates in structural concrete is usually [ A ] 0.50 - 1.25 [ B ] 1.25 - 4.50 [ C ] 1.50 - 2.50 [ D ] 0.25 - 0.75

Last Answer : [ C ] 1.50 - 2.50

For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm

Description : For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm

Last Answer : [ A ] 20 mm

The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick (A) 20 % (B) 15 % (C) 10 % (D) None of these

Description : The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick (A) 20 % (B) 15 % (C) 10 % (D) None of these

Last Answer : Answer: Option A

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

In case of Raymond pile (A) Lengths vary from 6 m to 12 m (B) Diameter of top of piles varies from 40 cm to 60 cm (C) Diameter of pile at bottom varies from 20 cm to 28 cm (D) All the above

Description : In case of Raymond pile (A) Lengths vary from 6 m to 12 m (B) Diameter of top of piles varies from 40 cm to 60 cm (C) Diameter of pile at bottom varies from 20 cm to 28 cm (D) All the above

Last Answer : Answer: Option D

The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Description : The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Last Answer : (D) 250 ppm