Batching refers to (A) Controlling the total quantity at each batch (B) Weighing accurately, the quantity of each material for a job before mixing (C) Controlling the quantity of each material into each batch (D) Adjusting the water to be added in each batch according to the moisture content of the materials being mixed in the batch

Batching refers to
(A) Controlling the total quantity at each batch
(B) Weighing accurately, the quantity of each material for a job before mixing
(C) Controlling the quantity of each material into each batch
(D) Adjusting the water to be added in each batch according to the moisture content of the
materials being mixed in the batch
by

1 Answer

Answer :

(C) Controlling the quantity of each material into each batch
by

Related questions

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Last Answer : (D) Batching

The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Last Answer : [ D ] Batching

Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Description : Batching error means inaccuracy in the quantity of (A) Aggregates (B) Cement (C) Water (D) All the above

Last Answer : Option D

If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0.1Z = W/C × P (B) 0.3P + 0.1Y + 0.01Z = W/C × P (C) 0.4P + 0.2Y + 0.01Z = W/C × P (D) 0.5P + 0.3Y + 0.01Z = W/C × P

Description : If P, Y and Z are the weights of cement, fine aggregates and coarse aggregates respectively and W/C is the water cement ratio, the minimum quantity of water to be added to first batch, is obtained by the equation (A) 0.1P + 0.3Y + 0. ... + 0.2Y + 0.01Z = W/C P (D) 0.5P + 0.3Y + 0.01Z = W/C P

Last Answer : Answer: Option B

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

Pick up the correct statement from the following: (A) Cement should be mixed for at least one minute (B) 10% of water is placed in the rotating drum before adding dry material (C) 10% of water is added after placing the other ingredients in the drum (D) All the above

Description : Pick up the correct statement from the following: (A) Cement should be mixed for at least one minute (B) 10% of water is placed in the rotating drum before adding dry material (C) 10% of water is added after placing the other ingredients in the drum (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water is the free water and the amount actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Pick up the correct statement from the following: (A) The free water is the amount of water added while mixing and the amount of water held on the surface of the aggregates prior to mixing (B) The total water ... actually absorbed by the aggregates (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production overheads, and non –production overheads are often added as a percentage of total production cost 3. The job costing method can be applied in costing batches (a) (1) only (b) (1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Description : Which of the following statements is/are correct? 1. A materials requisition note is used to record the issue of direct material to a specific job. 2. A typical job cost will contain actual costs for material, labour and production ... 1) and (2) only (c) (1) and (3) only (d) (2) and (3) only

Last Answer : (c) (1) and (3) only

Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Description : Advantage of continuous drying over batch drying is that the (A) Drying cost per unit weight of dried product is less (B) Product with more uniform moisture content is produced (C) Equipment size required is smaller (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

Humidity refers to (A) Temperature of the air (B) Pressure of the air (C) Moisture content of the air (D) Volume of the air

Description : Humidity refers to (A) Temperature of the air (B) Pressure of the air (C) Moisture content of the air (D) Volume of the air

Last Answer : Answer: Option C

According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Description : According to Water-Cement Ratio Law, the strength of workable plastic concrete (A) Depends upon the amount of water used in the mix (B) Does not depend upon the quality of cement mixed with aggregates (C) Does not depend upon the quantity of cement mixed with aggregates (D) All the above

Last Answer : Answer: Option D

To ensure constant moisture content in aggregates (A) Area of each aggregate pile should be large (B) Height of each aggregate pile should not exceed 1.50 m (C) Aggregate pile should be left for 24 hours before aggregates are used (D) All the above

Description : To ensure constant moisture content in aggregates (A) Area of each aggregate pile should be large (B) Height of each aggregate pile should not exceed 1.50 m (C) Aggregate pile should be left for 24 hours before aggregates are used (D) All the above

Last Answer : Answer: Option D

The standard method of controlling the output voltage of a 440 volt, 60 Hz, AC generator is accomplished by adjusting the ____________. A. prime mover speed droop B. number of poles C. alternator field excitation D. load on the alternator

Description : The standard method of controlling the output voltage of a 440 volt, 60 Hz, AC generator is accomplished by adjusting the ____________. A. prime mover speed droop B. number of poles C. alternator field excitation D. load on the alternator

Last Answer : Answer: C

A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large quantity of hydrogen in the fuel (B) Low calorific value of the fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Description : A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large ... fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air

Last Answer : (D) Lack of thorough mixing of fuel with air

According to IS 399-1963, the weight of the timber is specified at (A) 8% moisture content (B) 10% moisture content (C) 12% moisture content (D) 14% moisture content

Description : According to IS 399-1963, the weight of the timber is specified at (A) 8% moisture content (B) 10% moisture content (C) 12% moisture content (D) 14% moisture content

Last Answer : Answer: Option C

Prior to using an analog type ohmmeter, the leads are purposely shorted together. Which of the following actions should be taken if, when adjusting to 'zero' ohms, the indicating needle can not be returned to 'zero' on the scale? A. The lead clips should be replaced. B. The batteries should be replaced. C. The test reading should be added to each final reading. D. The test reading should be subtracted from each final reading.

Description : Prior to using an analog type ohmmeter, the leads are purposely shorted together. Which of the following actions should be taken if, when adjusting to 'zero' ohms, the indicating needle can not be ... be added to each final reading. D. The test reading should be subtracted from each final reading.

Last Answer : Answer: B

A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80

Description : A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80

Last Answer : (C) 0.75

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

A field soil sample weighing 60 g, lost12 g on over dying. What is the moisture percent on dry weight basis?

Description : A field soil sample weighing 60 g, lost12 g on over dying. What is the moisture percent on dry weight basis?

Last Answer : Ans. 25%

Proper batching ensures (A) Economy (B) Durability (C) Workability (D) All the above

Description : Proper batching ensures (A) Economy (B) Durability (C) Workability (D) All the above

Last Answer : (D) All the above

For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of aggregates (C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Description : For batching 1:3:6 concrete mix by volume, the ingredients required per bag of 50 kg cement, are: (A) 70 litres of sand and 120 litres of aggregates (B) 70 kg of sand and 140 litres of ... C) 105 litres of sand and 140 litres of aggregates (D) 105 litres of sand and 210 litres of aggregates

Last Answer : Answer: Option D

In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Description : In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Last Answer : (B) Peclet

The _____________ sensor, monitors mass or volume of air flowing into the intake manifold for adjusting the quantity of fuel. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Description : The _____________ sensor, monitors mass or volume of air flowing into the intake manifold for adjusting the quantity of fuel. a) engine temperature b) exhaust gas c) air flow d) air inlet temperature

Last Answer : Answer: c Explanation: The air flow sensor, monitors mass or volume of air flowing into the intake manifold for adjusting the quantity of fuel while exhaust gas senor senses the amount of oxygen in the engine exhaust and calculates air-fuel ratio.

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because(A) Temperature is less(B) Total pressure is less(C) Mixing of steam with the material being vaporised is not so intimate asto result in equilibrium condition(D) Saturated steam is used for steam distillation

Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation

Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition

When sufficient energy through mechanical mixing is supplied to keep the entire contents, including the sewage solids, mixed and aerated, the reactor is termed : (a) An aerobic lagoon (b) An aerobic pond (c) A facultative lagoon (d) A facultative pond

Description : When sufficient energy through mechanical mixing is supplied to keep the entire contents, including the sewage solids, mixed and aerated, the reactor is termed : (a) An aerobic lagoon (b) An aerobic pond (c) A facultative lagoon (d) A facultative pond

Last Answer : (a) An aerobic lagoon

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

In case of hand mixing of concrete, the extra cement to be added is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Description : In case of hand mixing of concrete, the extra cement to be added is (A) 5 % (B) 10 % (C) 15 % (D) 20 %

Last Answer : (B) 10 %

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

Gypsum is added for (A) Colour (B) Strength (C) Controlling setting time (D) None of these

Description : Gypsum is added for (A) Colour (B) Strength (C) Controlling setting time (D) None of these

Last Answer : Answer: Option C

The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

Description : The gypsum is added to the cement for (a) Providing high strength to the cement (b) Controlling the initial setting time of cement. (c) Lowering the clinkering temp of cement (d) All the above.

Last Answer : (b) Controlling the initial setting time of cement.

Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture

About 6.25 g of haemoglobin is produced and destroyed in the body each day and the total amount of haemoglobin in a normal healthy 70 kg weighing male adult is (A) 250 g (B) 150 g (C) 100 g (D) 70 g

Description : About 6.25 g of haemoglobin is produced and destroyed in the body each day and the total amount of haemoglobin in a normal healthy 70 kg weighing male adult is (A) 250 g (B) 150 g (C) 100 g (D) 70 g

Last Answer : Answer : D

In the constant rate period of the rate of drying curve for batch drying, (A) Cracks develop on the surface of the solid (B) Rate of drying decreases abruptly (C) Surface evaporation of unbound moisture occurs (D) None of these

Description : In the constant rate period of the rate of drying curve for batch drying, (A) Cracks develop on the surface of the solid (B) Rate of drying decreases abruptly (C) Surface evaporation of unbound moisture occurs (D) None of these

Last Answer : (C) Surface evaporation of unbound moisture occurs

A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Description : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Last Answer : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen ... . ii and iii only D. iii and iv only

A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Description : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after mixing of sewage into the river (i)

Last Answer : A large quantity of urban sewage is drained to a nearby river. Which among the given conditions would happen after ... iv C. ii and iii D. iii and iv

According to this lesson, what term is the way for commanders to adhere to LoW by weighing risk of collateral damage against military necessity and proportionality within the framework of the military decision-making process?

Description : According to this lesson, what term is the way for commanders to adhere to LoW by weighing risk of collateral damage against military necessity and proportionality within the framework of the military decision-making process?

Last Answer : Collateral Damage Estimation Methodology (CDM)

Steam Boilers is used in _________industries • Heating Requirement for Facility. • Steam for Batching. • Steam for Processing. • All of the above

Description : Steam Boilers is used in _________industries • Heating Requirement for Facility. • Steam for Batching. • Steam for Processing. • All of the above

Last Answer : • All of the above

Where are steam boilers used in the industries a) heating requirement for facility b) steam for batching c) steam for processing d) all of the above

Description : Where are steam boilers used in the industries a) heating requirement for facility b) steam for batching c) steam for processing d) all of the above

Last Answer : d) all of the above

Explain the significance of batching, compaction and curing of concrete.

Description : Explain the significance of batching, compaction and curing of concrete. 

Last Answer : Significance of Batching: 1. If the batching of materials required for concrete is not done appropriately, then random quantity of materials produce non-homogeneous concrete, which further leads to various ... . 3. Curing is necessary to make the concrete impermeable in nature its hardened state.

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

The property of a soil which permits water to percolate through it, is called (A) Moisture content (B) Permeability (C) Capillarity (D) None of these

Description : The property of a soil which permits water to percolate through it, is called (A) Moisture content (B) Permeability (C) Capillarity (D) None of these

Last Answer : (B) Permeability

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The portion of pellicular water which remains unutilised, is called hygroscopic water (B) The moisture content at which permanent wilting of plants takes place, is called the wilting point (C) The moisture deficiency will be different at different points (D) All the above

Description : Pick up the correct statement from the following: (A) The portion of pellicular water which remains unutilised, is called hygroscopic water (B) The moisture content at which permanent wilting of plants ... point (C) The moisture deficiency will be different at different points (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite (B) Dr. L. Bakeland, a Belgian scientist prepared a product known as Bakelite (C) Pollark, an Austrian scientist prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Description : Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite ... prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Last Answer : Answer: Option D