Pick up the correct statement from the following: (A) The operation of removing material from the sea or river bed is known as (B) Dredging (C) Digging (D) None of these

Pick up the correct statement from the following:
(A) The operation of removing material from the sea or river bed is known as
(B) Dredging
(C) Digging
(D) None of these
by

1 Answer

Answer :

(A) The operation of removing material from the sea or river bed is known as
by

Related questions

The operation of cutting, picking, plucking digging or any combination of these for removing the whole crop or edible part of the crop from either under the ground or above the ground is called a. threshing b. Post harvesting d. None of above

Description : The operation of cutting, picking, plucking digging or any combination of these for removing the whole crop or edible part of the crop from either under the ground or above the ground is called a. threshing b. Post harvesting d. None of above

Last Answer : Ans-    c. Harvesting

Pick up the correct statement from the following: (A) Large solids carried along the river bed, is known as bed load (B) The fine sediment deposits are generally near the face of the dam (C) Deposition of sediment in the reservoir, reduces the capacity of the reservoir (D) All the above

Description : Pick up the correct statement from the following:  (A) Large solids carried along the river bed, is known as bed load  (B) The fine sediment deposits are generally near the face of ... ) Deposition of sediment in the reservoir, reduces the capacity of the reservoir  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) A confined bed of impervious material laid over an aquifer, is known as an aquiclude (B) The top most water bearing strata having no aquifer, is known as non-artesian aquifer (C) The ordinary gravity wells which supply water from the top most water bearing strata, are called water table wells (D) All the above

Description : Pick up the correct statement from the following: (A) A confined bed of impervious material laid over an aquifer, is known as an aquiclude (B) The top most water bearing strata having no aquifer, is ... water from the top most water bearing strata, are called water table wells (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is called sounding (C) The contour lines on the bed of a water body are called fathoms (D) All the abov

Description : Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is ... (C) The contour lines on the bed of a water body are called fathoms (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The direction of the littoral drift depends upon the direction of the wave with respect to the coastline (B) The direction of a river opening to the sea determines the direction of no littoral drift (C) Harbour in the path of littoral drift is not constructed to avoid a build up of sand on one side and erosion on the other (D) all of the above

Description : Pick up the correct statement from the following: (A) The direction of the littoral drift depends upon the direction of the wave with respect to the coastline (B) The direction of a river opening to the sea ... avoid a build up of sand on one side and erosion on the other (D) all of the above

Last Answer : (D) all of the above

Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by removing paint and giving a fresh coat of paint (C) Crawling paints may be cured by sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Description : Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by ... sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Last Answer : Answer: Option D

Pick up the PERT event from the following: (A) Digging of foundation started (B) Digging of foundation completed (C) Laying of concrete started (D) All the above

Description : Pick up the PERT event from the following: (A) Digging of foundation started (B) Digging of foundation completed (C) Laying of concrete started (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

Dredging is most effective treatment for controlling a). Parasitic weeds b). Lantana c). Agrestals d). Aquatic weeds

Description : Dredging is most effective treatment for controlling a). Parasitic weeds b). Lantana c). Agrestals d). Aquatic weeds

Last Answer : d). Aquatic weeds

The operation of removing humps and hollows of uniform concrete surface, is known as (A) Floating (B) Screeding (C) Trowelling (D) Finishing

Description : The operation of removing humps and hollows of uniform concrete surface, is known as (A) Floating (B) Screeding (C) Trowelling (D) Finishing

Last Answer : (B) Screeding

Pick up the correct statement from the following: (A) If the bed level is above N.S.L. the canal is called fully in baking and the berms are designed as 3 d where d is full supply depth of water (F.S.D.) (B) Area of canal in cutting = BD + Sd 2 where B = bed width, d = depth of cutting and S is the side slope (C) If F.S.L. is above N.S.L the canal is called partly in cutting and partly in filling and berms are designed as 2d where d is full supply depth (D) All the above

Description : Pick up the correct statement from the following: (A) If the bed level is above N.S.L. the canal is called fully in baking and the berms are designed as 3 d where d is full supply depth of water ... and partly in filling and berms are designed as 2d where d is full supply depth (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The distinct plane of division along which a stone can easily be split, is called natural bed of stone (B) The natural bed of sedimentary rocks is along the planes of stratification (C) The natural bed of igneous rocks is not defined (D) All the above

Description : Pick up the correct statement from the following: (A) The distinct plane of division along which a stone can easily be split, is called natural bed of stone (B) The natural bed of sedimentary ... planes of stratification (C) The natural bed of igneous rocks is not defined (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The volume of underground water extracted by gravity drainage from a saturated soil, is known as yield (B) The ratio of volume drained to the total volume of material drained, is known as specific yield (C) The sum of specific yield and specific retention, is equal to porosity (D) All the above

Description : Pick up the correct statement from the following:  (A) The volume of underground water extracted by gravity drainage from a saturated soil, is  known as yield  (B) The ratio of volume ... ) The sum of specific yield and specific retention, is equal to porosity  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco-elastic material, stress-strain relation is dependent on time (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Description : Pick up the correct statement from the following: (A) The distance of the eccentric axial load from the C.G. beyond which tension develops, is known as kern distance (B) In visco ... (C) An orthotropic material has different properties in three mutually perpendicular directions (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm (C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Description : Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm ( ... having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The heating of a material to redness in contact with air, is known as calcination (B) The property of lime by which it sets or hardens in damp places having no free circulation of air is called setting (C) The product that remains after calcination of limestone, is called lime (D) All the above

Description : Pick up the correct statement from the following: (A) The heating of a material to redness in contact with air, is known as calcination (B) The property of lime by which it sets or hardens in ... (C) The product that remains after calcination of limestone, is called lime (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating process (C) The plastic articles made by placing raw material in the desired moulds, is known as moulding process (D) All the above

Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite (B) Dr. L. Bakeland, a Belgian scientist prepared a product known as Bakelite (C) Pollark, an Austrian scientist prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Description : Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite ... prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) With both handles in his left hand, the chain man throws out the chain with his right hand and the second chain man assists him to free it from knots (B) The follower of the chaining operation should be more experienced than the leader (C) At the end of the tenth chain length, the two chain men meet and the ten arrows are handed over to the leader (D) All the above

Description : Pick up the correct statement from the following: (A) With both handles in his left hand, the chain man throws out the chain with his right hand and the second chain man assists him to free it from ... the two chain men meet and the ten arrows are handed over to the leader (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) The Mediterranean Sea is considered to be a huge harbour (B) The Caspian Sea is considered to be a big harbour (C) The Red sea is considered to be harbour (D) None of the above

Description : Pick up the correct statement from the following: (A) The Mediterranean Sea is considered to be a huge harbour (B) The Caspian Sea is considered to be a big harbour (C) The Red sea is considered to be harbour (D) None of the above

Last Answer : (A) The Mediterranean Sea is considered to be a huge harbour

Pick up the correct statement from the following: (A) The tides at any place occur a little less than 1 hour later, each succeeding day (B) The influence of the earth's gravity alone produces level-tidal less sea (C) The spinning force is maximum at the equator and zero at the poles (D) All of the above

Description : Pick up the correct statement from the following: (A) The tides at any place occur a little less than 1 hour later, each succeeding day (B) The influence of the earth's gravity alone produces level-tidal ... ) The spinning force is maximum at the equator and zero at the poles (D) All of the above

Last Answer : (D) All of the above

Pick up the correct statement from the following: (A) The regular periodic rise and fall of the surface of the sea, is called tide (B) The average difference in water level between high tide and low tide at a place, is called tidal range (C) The movement of water caused by the action of tide, is called a tidal current (D) all of the above

Description : Pick up the correct statement from the following: (A) The regular periodic rise and fall of the surface of the sea, is called tide (B) The average difference in water level between high tide and low tide ... of water caused by the action of tide, is called a tidal current (D) all of the above

Last Answer : (D) all of the above

Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The chloride in sea shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in the river, is called trap efficiency (B) Small capacity reservoirs on large rivers generally, silt less (C) Large capacity reservoirs on small rivers generally silt more (D) All the above

Description : Pick up the correct statement from the following:  (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in  the river, is called trap efficiency  ( ... less  (C) Large capacity reservoirs on small rivers generally silt more  (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Run off and surface run off are the same (B) Run off includes the water flowing over the surface (C) Run off is sometimes called discharge of the river (D) Surface run off is sometimes called stream flow

Description : Pick up the correct statement from the following: (A) Run off and surface run off are the same (B) Run off includes the water flowing over the surface (C) Run off is sometimes called discharge of the river (D) Surface run off is sometimes called stream flow

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above

Description : Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) A ductile material has large plastic zone (B) A brittle material has no plastic zone (C) A rigid material has no plastic zone (D) All the above

Description : Pick up the correct statement from the following: (A) A ductile material has large plastic zone (B) A brittle material has no plastic zone (C) A rigid material has no plastic zone (D) All the above

Last Answer : All the above

Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil is the material in a relatively thin surface zone within which roots occur, and rest of the crust is termed as rock irrespective of hardness (C) To an engineer, soil is the unaggregated and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Description : Pick up the correct statement from the following: (A) To an agriculturist, soil is the substance existing on the earth's surface, which grows and develops plants (B) To a geologist, soil ... and uncemented deposits of minerals and organic particles covering the earth's crust (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic lines of force can penetrate a medium (C) Permeability is expressed as the ratio of the magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Description : Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic ... magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Cement should be mixed for at least one minute (B) 10% of water is placed in the rotating drum before adding dry material (C) 10% of water is added after placing the other ingredients in the drum (D) All the above

Description : Pick up the correct statement from the following: (A) Cement should be mixed for at least one minute (B) 10% of water is placed in the rotating drum before adding dry material (C) 10% of water is added after placing the other ingredients in the drum (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Description : Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Last Answer : Answer: Option D

Water supply system includes (A) Digging a well for water (B) Construction of dams (C) Construction of canals (D) Entire arrangement from source to distribution

Description : Water supply system includes  (A) Digging a well for water  (B) Construction of dams  (C) Construction of canals  (D) Entire arrangement from source to distribution 

Last Answer : (D) Entire arrangement from source to distribution 

Which of the following excavators is most suitable for digging under water? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shovel

Description : Which of the following excavators is most suitable for digging under water? (A) Drag line (B) Hoe (C) Clam shell (D) Dipper shovel

Last Answer : (A) Drag line

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on the coding system given below: (A) Both A and R is true and R is correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is correct explanation of A

Consider the following statements The general depth of scour calculated by Lacey’s formula in a river represents the depth below the: 1. Maximum flood level in the river 2. Minimum flow water level in the river 3. Normal flow water level in the river 4. Existing river bed level Which of these statements is/are correct ? a) 1, 2, 3 and 4 b) 1, 2 and 3 only c) 2, 3 and 4 only d) 1 only

Description : Consider the following statements The general depth of scour calculated by Lacey's formula in a river represents the depth below the: 1. Maximum flood level in the river 2. Minimum flow water level in the river 3. Normal flow water ... 2, 3 and 4 b) 1, 2 and 3 only c) 2, 3 and 4 only d) 1 only

Last Answer : d) 1 only

Consider the following statements. Morphological characteristics of a river are represented by : 1. Changes in the river form 2. Changes in the characteristics of the river bed s a result of variation of discharge in the river 3. No change in the river plan form Which of these statements are correct ? a) 1 and 2 b) 1 and 3 c) 2 and 3 d) 3 and 4

Description : Consider the following statements. Morphological characteristics of a river are represented by : 1. Changes in the river form 2. Changes in the characteristics of the river bed s a result of variation of discharge in the river 3. No ... are correct ? a) 1 and 2 b) 1 and 3 c) 2 and 3 d) 3 and 4

Last Answer : a) 1 and 2

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the concrete base (C) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Description : Pick up the correct statement from the following: (A) Isolated footing is provided under column to transfer the load safely to soil bed (B) Column footings may have steps or projections in the ... ) Heavily loaded column base must be provided steel reinforcement in both directions (D) All the above

Last Answer : Option D

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

When removing soiled linen from patients bed?

Description : When removing soiled linen from patients bed?

Last Answer : To answer this question we need a who, what, when, why, where,how or why question. Your question has left out the subject of thequestion.

Which of the following should be the FIRST step in removing a generator from parallel operation? A. Trip the generator off the switchboard. B. Turn off all electrical equipment. C. Remove the load from the 'off going' generator. D. Increase the cycles of the generator staying on the line.

Description : Which of the following should be the FIRST step in removing a generator from parallel operation? A. Trip the generator off the switchboard. B. Turn off all electrical equipment. C. Remove the load from the 'off going' generator. D. Increase the cycles of the generator staying on the line.

Last Answer : Answer: C

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Pick up the correct statement from the following: (A) The amount of rainfall in 24 hours, is known as daily rainfall (B) The amount of rainfall in one year, is known as annual rainfall (C) The rain cycle period in India is taken as 35 years (D) All the above

Description : Pick up the correct statement from the following:  (A) The amount of rainfall in 24 hours, is known as daily rainfall  (B) The amount of rainfall in one year, is known as annual rainfall  (C) The rain cycle period in India is taken as 35 years  (D) All the above 

Last Answer : (D) All the above 

Pick up the correct statement from the following: (A) The bending stress in a section is zero at its neutral axis and maximum at the outer fibres (B) The shear stress is zero at the outer fibres and maximum at the neutral axis (C) The bending stress at the outer fibres, is known as principal stress (D) All the above

Description : Pick up the correct statement from the following:  (A) The bending stress in a section is zero at its neutral axis and maximum at the outer fibres  (B) The shear stress is zero at the outer ... (C) The bending stress at the outer fibres, is known as principal stress  (D) All the above 

Last Answer : (D) All the above